TCAITDI.INF Driver File Contents (3c905.exe)


[Identification]
 OptionType = NetTransport
[Options]
 TCAITDI
[FileConstants]
UtilityInf = "UTILITY.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "service"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
Manufacturer = "3Com"
TCAITDIMajorVersion = "1"
TCAITDIMinorVersion = "0"
TCAITDIVersion = $(TCAITDIMajorVersion)"."$(TCAITDIMinorVersion)
TCAITDISoftwareName = "TCAITDI"
TCAITDISoftwareImagePath = "%SystemRoot%\System32\drivers\TCAITDI.sys"
NetRuleSoftwareType = "TCAITDI lmNetService ndisTransport"
NetRuleSoftwareClass = {"rasCapableTransport netBiosTransport"}

NetRuleSoftwareUse = $(SoftwareType)" yes yes"
NetRuleSoftwareBindForm = """TCAITDI"" yes yes simple"

TCAITDIKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(TCAITDISoftwareName)"\CurrentVersion"


[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyTCAITDI = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers

[date]
 Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
 read-syms Identification
 set Status = STATUS_SUCCESSFUL
 set Identifier = $(OptionType)
 set Media = #("Source Media Descriptions", 1, 1)
 Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
 set Status = STATUS_FAILED
 set OptionList = {}
 set OptionTextList = {}
 set LanguageList = ^(LanguagesSupported, 1)
 Ifcontains(i) $($0) in $(LanguageList)
 goto returnoptions
 else
 set Status = STATUS_NOLANGUAGE
 goto finish_ReturnOptions
 endif
returnoptions = +
 set OptionList = ^(Options, 1)
 set OptionTextList = ^(OptionsText$($0), 1)
 set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
 Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
 set Option = $($1)
 set SrcDir = $($2)
 set AddCopy = $($3)
 set DoCopy = $($4)
 set DoConfig = $($5)
 set CalledFrom = $($6)
 Debug-Output "TCAITDI.INF: $($6) is: "$(CalledFrom)
 set LanguageList = ^(LanguagesSupported, 1)
 Ifcontains(i) $($0) NOT-IN $(LanguageList)
 Return STATUS_NOLANGUAGE
 endif
 Debug-Output "OEMNXPNB.INF: STF_CWDDIR is: "$(!STF_CWDDIR)
 Debug-Output "OEMNXPNB.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
 set-subst LF = "\n"
 read-syms GeneralConstants
 read-syms FileConstants
 read-syms DialogConstants$(!STF_LANGUAGE)
 ifstr(i) $(!NTN_Origination) == "NCPA"
 set Continue = $(OK)
 endif
 read-syms FileConstants$(!STF_LANGUAGE)
 detect date
 set-title $(FunctionTitle)
 set to = Begin
 set from = Begin
 set CommonStatus = STATUS_SUCCESSFUL
 EndWait
Begin = +
 Ifstr(i) $(!NTN_InstallMode) == deinstall
 set StartLabel = removeadapter
 else-Ifstr(i) $(!NTN_InstallMode) == Update
 set StartLabel = UpgradeSoftware
 else-Ifstr(i) $(!NTN_InstallMode) == bind
 set StartLabel = bindingadapter
 else-Ifstr(i) $(!NTN_InstallMode) == configure
 Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 Debug-Output "OEMNXPNB.INF: ShellCode error: cannot get an error string."
 goto ShellCodeError
 endif
 set Error = $($R0)
 set from = end
 set to = end
 goto nonfatalinfo
 else
 set StartLabel = installadapter
 endif
 set RadioDefault = 2
 set RadioIn = {$(RadioDefault)}
 set from = $(fatal)
 set to = $(fatal)
 goto $(StartLabel)
installadapter = +
 OpenRegKey $(!REG_H_LOCAL) "" $(TCAITDIKeyName) $(MAXIMUM_ALLOWED) KeyTCAITDI
 Ifstr $(KeyTCAITDI) != $(KeyNull)
 CloseRegKey $(KeyTCAITDI)
 ifstr $(Option) == "TCAITDI"
 goto end
 endif
 endif
 goto installproduct
installproduct = +
 StartWait
 ifint $(OldVersionExisted) == $(FALSE)
 Ifstr(i) $(DoCopy) == "YES"
 Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
 Ifint $($ShellCode) != $(!SHELL_CODE_OK)
 Goto ShellCodeError
 Else-Ifstr(i) $($R0) == STATUS_FAILED
 Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set Error = $($R0)
 Goto fatal
 Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
 Goto successful
 Endif
 Set SrcDir = $($R1)
 Endif
 install "Install-Option"
 ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
 Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set Error = $($R0)
 goto fatal
 endif
 set OEM_ABANDON_ON = TRUE
 
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
 $(TCAITDISoftwareName), +
 $(TCAITDISoftwareName), +
 $(TCAITDISoftwareDisplayName), $(STF_CONTEXTINFNAME), +
 $(TCAITDISoftwareImagePath), "kernel", "TDI", {}, "",+
 $(NetEventDLL)
 set RegistryErrorIndex = $($R0)
 Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
 EndWait
 CloseRegKey $($R1)
 CloseRegKey $($R2)
 CloseRegKey $($R3)
 CloseRegKey $($R4)
 CloseRegKey $($R5)
 goto fatalRegistry
 endif
 Set SoftTCAITDIKey = $($R1)
 Set SoftNetRuleKey = $($R2)
 Set SoftServiceKey = $($R3)
 set KeyParameters = $($R4)
 Set SoftLinkageKey = $($R5)
 set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
 {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(TCAITDIMajorVersion)},+
 {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(TCAITDIMinorVersion)},+
 {"Locked",$(NoTitle),$(!REG_VT_SZ),"ON"},+
 {"Uninstall",$(NoTitle),$(!REG_VT_SZ),"NO"},+
 {Title,$(NoTitle),$(!REG_VT_SZ),$(TCAITDISoftwareTitle)},+
 {Description,$(NoTitle),$(!REG_VT_SZ),$(TCAITDISoftwareDescription)},+
 {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(TCAITDISoftwareName)},+
 {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
 Shell $(UtilityInf), AddValueList, $(SoftTCAITDIKey), $(NewValueList)
 set RegistryErrorIndex = $($R0)
 Ifstr $(RegistryErrorIndex) != NO_ERROR
 CloseRegKey $(SoftTCAITDIKey)
 CloseRegKey $(SoftNetRuleKey)
 CloseRegKey $(SoftServiceKey)
 CloseRegKey $(SoftLinkageKey)
 CloseRegKey $(KeyParameters)
 goto fatalRegistry
 endif
 set NewValueList = {{type ,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)}, +
 {use ,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
 {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
 {InfOption,$(NoTitle),$(!REG_VT_SZ),"TCAITDI"}}
 Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
 set RegistryErrorIndex = $($R0)
 Ifstr $(RegistryErrorIndex) != NO_ERROR
 CloseRegKey $(SoftTCAITDIKey)
 CloseRegKey $(SoftNetRuleKey)
 CloseRegKey $(SoftServiceKey)
 CloseRegKey $(SoftLinkageKey)
 CloseRegKey $(KeyParameters)
 goto fatalRegistry
 endif
 Set NewValueList = {{NbProvider,$(NoTitle),$(!REG_VT_SZ),"_nb"}}
 Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
 Ifstr $(RegistryErrorIndex) != NO_ERROR
 CloseRegKey $(SoftTCAITDIKey)
 CloseRegKey $(SoftNetRuleKey)
 CloseRegKey $(SoftServiceKey)
 CloseRegKey $(SoftLinkageKey)
 goto fatalRegistry
 endif
 CloseRegKey $(SoftTCAITDIKey)
 CloseRegKey $(SoftNetRuleKey)
 CloseRegKey $(SoftServiceKey)
 CloseRegKey $(SoftLinkageKey)
 endif

	OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE" $(!REG_KEY_WRITE) SOFTWAREKEY
	OpenRegKey $(SOFTWAREKEY) "" "3Com" $(!REG_KEY_WRITE) COMKEY
	 ifstr $(COMKEY) == ""
	 CreateRegKey $(SOFTWAREKEY) {"3Com", 0, GenericClass} "" $(!REG_KEY_WRITE) "" COMKEY
	 endif
	 
	OpenRegKey $(COMKEY) "" "TCAUDIAG" $(!REG_KEY_WRITE) KeyAutoEcho
	 ifstr $(KeyAutoEcho) == ""
	 CreateRegKey $(COMKEY) {"TCAUDIAG", 0, GenericClass} "" $(!REG_KEY_WRITE) "" KeyAutoEcho
	 endif
 Set NewValueList = {{AutoEcho,$(NoTitle),$(!REG_VT_SZ),"YES"}}
 Shell $(UtilityInf), AddValueList, $(KeyAutoEcho), $(NewValueList)
 Ifstr $(RegistryErrorIndex) != NO_ERROR
 goto fatalRegistry
 endif
 CloseRegKey $(SOFTWAREKEY)
 CloseRegKey $(COMKEY)
 CloseRegKey $(KeyAutoEcho)
 

goto writeparameters
writeparameters = +
 CloseRegKey $(KeyParameters)
 

EndWait
 goto successful
bindingadapter =+
 set Error = "Binding: Sorry, not yet implemented."
 goto fatal
removeadapter = +

ifstr(i) $(CalledFrom) == "-inf"
 
RunProgram status "x" "" $(!STF_WINDOWSSYSPATH)\unTCATDI.exe -test


 


else
 
OpenRegKey $(!REG_H_LOCAL) "" $(TCAITDIKeyName) +
 $(MAXIMUM_ALLOWED) TCAITDIKey
 
GetRegValue $(TCAITDIKey) "Locked" TCAITDIList
 set Type = *($(TCAITDIList),4)
 Ifstr(i) $(Type) == "ON"
 Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "STATUS",+
 "3COM TCAITDI Diagnostic TDI can't be removed. It is only used for Diagnostic Utilities and will be removed automatically when all 3Com NIC's it supports are removed."

 CloseRegKey $(TCAITDIKey)
 goto end
 endif
 CloseRegKey $(TCAITDIKey)
 endif	
 
RunProgram status "x" "" $(!STF_WINDOWSSYSPATH)\unTCATDI.exe -inf


OpenRegKey $(!REG_H_LOCAL) "" $(TCAITDIKeyName) +
 $(MAXIMUM_ALLOWED) TCAITDIKey

GetRegValue $(TCAITDIKey) "Uninstall" TCAITDIList
 set Uninst = *($(TCAITDIList),4)
 Ifstr(i) $(Uninst) == "YES"
 
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	$(TCAITDISoftwareName)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error"
	goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	goto fatalregistry
	endif
 endif
CloseRegKey $(TCAITDIKey)
 
goto end
UpgradeSoftware = +
 
goto end
successful = +
 goto end
warning = +
 Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 ifstr(i) $($R1) == "OK"
 goto $(to)
 else-ifstr(i) $($R1) == "CANCEL"
 goto $(from)
 else
 goto "end"
 endif
nonfatalinfo = +
 Set CommonStatus = STATUS_USERCANCEL
 Set Severity = STATUS
 goto nonfatalmsg
nonfatal = +
 Set Severity = NONFATAL
 goto nonfatalmsg
nonfatalmsg = +
 ifstr(i) $(Error) == ""
 Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set Error = $($R0)
 endif
 Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 ifstr(i) $($R1) == "OK"
 goto $(from)
 else
 goto "end"
 endif
fatalregistry = +
 Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set Error = $($R0)
 goto fatal
fatal = +
 ifstr(i) $(Error) == ""
 Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set Error = $($R0)
 endif
 Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 goto setfailed
ShellCodeError = +
 set DlgType = "MessageBox"
 set STF_MB_TITLE = $(ShellCodeErrorTitle)
 set STF_MB_TEXT = $(ShellCodeErrorText) 
set STF_MB_TYPE = 1
 set STF_MB_ICON = 3
 set STF_MB_DEF = 1
 ui start "Error Message"
 goto setfailed
setfailed = +
 set CommonStatus = STATUS_FAILED
 ifstr(i) $(OEM_ABANDON_ON) == TRUE
 set OEM_ABANDON_ON = FALSE
 goto removeadapter
 endif
 goto end
end = +
 goto term
term = +
 Return $(CommonStatus)


[UserAbort]
read-syms GeneralConstants
 read-syms FileConstants
 read-syms DialogConstants$(!STF_LANGUAGE)
 read-syms FileConstants$(!STF_LANGUAGE)

detect checkExist
set Untdi = *($(TdiuninstFound), 1)
ifstr(i) $(Untdi) == "untcatdi.exe" 
RunProgram status "x" "" $(!STF_WINDOWSSYSPATH)\unTCATDI.exe -test 
RunProgram status "x" "" $(!STF_WINDOWSSYSPATH)\unTCATDI.exe -inf
endif

OpenRegKey $(!REG_H_LOCAL) "" $(TCAITDIKeyName) $(MAXIMUM_ALLOWED) TCAITDIKey
GetRegValue $(TCAITDIKey) "Uninstall" TCAITDIList
 set Uninst = *($(TCAITDIList),4)
 Ifstr(i) $(Uninst) == "YES" 
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	$(TCAITDISoftwareName)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error"
	goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	goto fatalregistry
	endif
endif
CloseRegKey $(TCAITDIKey)
Set CommonStatus = STATUS_USERCANCEL 
Return $(CommonStatus)

[checkExist]
TdiuninstFound = {} ? $(!LIBHANDLE) FindFileInstances $(!STF_WINDOWSSYSPATH)"\untcatdi.exe"

[Install-Option]
 set STF_VITAL = ""
 ifstr(i) $(AddCopy) == "YES"
 AddSectionFilesToCopyList Files-TCAITDI $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
 AddSectionFilesToCopyList Files-SetUp $(SrcDir) $(!STF_WINDOWSSYSPATH)
 endif
 ifstr(i) $(DoCopy) == "YES"
 set !STF_NCPA_FLUSH_COPYLIST = TRUE
 CopyFilesInCopyList
 endif
 ifstr(i) $(DoConfig) == "YES"
 endif
 Exit

[Source Media Descriptions]
 1 = "3Com EtherDisk for 3Com EtherLink PCI NICs (Diskette 1)", TAGFILE = 3CDISK1
 2 = "3Com EtherDisk for 3Com EtherLink PCI NICs (Diskette 2)", TAGFILE = 3CDISK2
 3 = "3Com EtherDisk for 3Com EtherLink PCI NICs (Diskette 3)", TAGFILE = 3CDISK3
 
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386


[Files-TCAITDI]
1, TCAITDI.SYS, SIZE=10000

[Files-SetUp] 
1, UNTCATDI.exe, SIZE=10000

[LanguagesSupported]
 ENG
[OptionsTextENG]
 NDISPERF = "3Com TCAITDI Diagnostic TDI"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
 "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = "TCAITDI Driver"
;TCAITDISoftwareDescription = "3Com Diagnostic Communication Module"
TCAITDISoftwareDescription = "This module controls communication between the diagnostic and the 3Com NIC driver.  You can unbind this module from non-3Com NICs. This module cannot be removed. Removing the NIC will also remove this module."
TCAITDISoftwareDisplayName = "3Com Diagnostic Communication Module" 
TCAITDISoftwareTitle = $(TCAITDISoftwareDisplayName)
TCAITDIServiceDisplayName = $(TCAITDISoftwareDisplayName)
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText = "Shell Code Error."
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
GroupLabel = "Optimization:"
Radio1 = "&Minimize Memory Used"
Radio2 = "&Balance"
Radio3 = "M&aximize Throughput && Connections"
DlgType = "Radio" 
DlgTemplate = "NBF" 
Caption = $(FunctionTitle)
OptionsGreyed = {}
HelpContext = $(!IDH_DB_OEMNXPNB_INS)

;(%VER TCAITDI.INF - Disk Directory v5.0.1)
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.86