[comm] SmallI2C=0 [Setup] DefDir=C:\ONFLASH Company=OnSpec Product=Firmware Flashing Utility Caption=Firmware Flashing Utility Group=Firmware Flashing Utility [Firmware] ; This is where you would list the vendor specific firmware files. ; For DataFab, you can make use of the unused entries to list files ; You MUST modify QTOOLS.INI to change the Driver Name (ImUSB, OnUSB, DfUSB) ; also... FILE1=EIDE0707.BIN FILE2=CDRW0906.BIN FILE3=Zero.Bin [Firmware Options] ; Set to YES to save the previous Firmware SaveCurrentFile=No ; Set to YES to Verify the firmware after it is flashed. AutoVerify=Yes ; Set to YES to load SETCLK.OBJ & SETCLK.FIX SetClock=No ; Set to YES to load RESET.OBJ & RESET.FIX in Win2K & ME. ResetDevice=No [Board Test] ; Depending on the customer the RHS file names might change so the WISE ; Installer will pick up the changed name and copy them back as TEST.OBJ ; and TEST.FIX respectively... TEST.OBJ=TEST.OBJ TEST.FIX=TEST.FIX ENABLE.OBJ=ENABLEDF.OBJ ENABLE.FIX=ENABLEDF.FIX [GUI] ; Right now the number of buttons supported is 2,3 & 4. Product=USB TEXT=This utility configures the USB bridge to 90C36 interface. NoOfButtons=2 Test= TestEnable= [Button1Details] ; For File names please always use comma (,) at the end of each file name NAME=Flash IDE TEXT=Select this button to configure the USB bridge to IDE drives. FILES=EIDE0707.BIN [Button2Details] ; For File names please always use comma (,) at the end of each file name NAME=Flash ATAPI TEXT=Select this button to configure the USB bridge to ATAPI CDRW drives. FILES=CDRW0906.binDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.