1. scanw231.exe Driver
2. SCANMGR.INI File Contents

SCANMGR.INI Driver File Contents (scanw231.exe)

;If your TWAIN scanner is not 100% compliant with
;the TWAIN specification, you will need to add a 
;section to this file similar to the existing 
;entries. Add an entry such as the following.
;(Remember to remove the semicolons and comments.)

;[Name of your TWAIN data source]
;SHOW_UI=0   
;INVERT=1
;LA_INVERT=0
;THRESHOLD=1
;AUTO_BRI=1
;DISPLAY_PROGRESS=1


;SHOW_UI=0 indicates whether or not the TWAIN Data 
;Source user interface will be displayed or not.
;0 means no, 1 means yes.
;
;INVERT=1 indicates whether the gray image will be
;inverted or not. If your scans appear as black
;pages with white text, and INVERT=1, make INVERT=0.
;If INVERT=0, make INVERT=1.
;
;LA_INVERT=0 indicates whether the binary image (lineart)
;will be inverted or not. If your scans appear as black
;pages with white text, and LA_INVERT=1, make LA_INVERT=0.
;If LA_INVERT=0, make LA_INVERT=1.
;
;THRESHOLD=1 indicates how to get brightness information 
;from data source. If you cannot set brightness for 
;lineart image and THRESHOLD=1, make THRESHOLD=0.
;If THRESHOLD=0, make THRESHOLD=1.
;
;AUTO_BRI=1 determines whether or not grayscale scanning
;can be used with OmniPage. If you have a 256-grayscale
;scanner, this should be set at 1. If you have problems
;change it to 0.
;
;DISPLAY_PROGRESS=1 Use this if your data source does
;not have a progress indicator and SHOW_UI=0.

;IMPORTANT - In your TWAIN scan module dialog box, you MUST use 
;these settings:
;RESOLUTION: 300dpi
;Scaling: 100%
;Scan Frame: 8.5" x 11" or 8.5" x 14"
;Scan Mode: Grayscale or Line Art
;Note: If you use Grayscale, choose 3D OCR or AnyPage in the
;OmniPage Scanner settings panel. If you use Line Art, choose
;Manual brightness in the OmniPage Scanner settings panel.


[ScanMgr]
ProductName=OmniPage
MicrotekPort=0200
MicrotekSpeed=1
ModelName=
nBrightness=1
nContrast=1
Setup=Y
TwainDS=Microtek Scan Wizard
CurrentScannerId=54

[Microtek Image Scanner]
SHOW_UI=0   
INVERT=0
LA_INVERT=0
THRESHOLD=1
AUTO_BRI=1
DISPLAY_PROGRESS=1

[Microtek ScanWizard]
SHOW_UI=0   
INVERT=1
LA_INVERT=0
THRESHOLD=1
AUTO_BRI=1
DISPLAY_PROGRESS=1

[DeskScan II]
COMMENT=ScanJet_Plus_IIp_IIc_IIcx,01001, OK
SHOW_UI=0
INVERT=0
LA_INVERT=0
THRESHOLD=0
AUTO_BRI=1

[Canon IX-4015]
COMMENT=CANONIX4015,01101, OK
SHOW_UI=0
INVERT=1
LA_INVERT=1
THRESHOLD=1
AUTO_BRI=1

[Canon IX-3010]
COMMENT=CANONIX3010,01111, OK
SHOW_UI=0
INVERT=1
LA_INVERT=1
THRESHOLD=1
AUTO_BRI=1

[RELISYS SCSI-2 Scanner]
COMMENT=Relisys, 01101, OK
SHOW_UI=0
INVERT=1
LA_INVERT=1
THRESHOLD=0
AUTO_BRI=1

[UMAX Scanner V1.04]
SHOW_UI=0
INVERT=0
AUTO_BRI=1

[Avision TWAIN Source]
COMMENT=Avision
SHOW_UI=1
INVERT=1
AUTO_BRI=1

[FotoLook V1.25 Twain]
COMMENT=Agfa StudoiSCAN, 111
SHOW_UI=1
INVERT=1
AUTO_BRI=1

[Kofax Device]
COMMENT=FUJITSU,010
SHOW_UI=0
INVERT=1
AUTO_BRI=0

[Pentax IQ Scan]
COMMENT=PENTAX_IQ_SCAN, 011
SHOW_UI=0
INVERT=1
AUTO_BRI=1

[NISCAN Page]
COMMENT=NISCAN,111
SHOW_UI=1
INVERT=1
AUTO_BRI=1

[COMMENT]
COMMENT=THIS_COMMENT_IS_FOR_LOGITECH_ONLY
DPI=0 - 200 dpi, 1 - 300 dpi, 2 - 400 dpi
DOCTYPE=0 - black & white, 1 - gray scale
ORIENT=2 - Auto, 3 - portrait, 4 - landscape(L to R), 5 - landscape(R to L)

[Logitech ScanMan]
SHOW_UI=1
INVERT=1
AUTO_BRI=1
DPI=1
DOCTYPE=0
ORIENT=4

[Logitech PowerPage]
SHOW_UI=0
INVERT=1
LA_INVERT=1
THRESHOLD=0
AUTO_BRI=1
DPI=1
DOCTYPE=0
ORIENT=3

[SheetFed Scanner V2.01]
COMMENT=Logitech SP_COLOR_6000, 00001, OK
SHOW_UI=0
INVERT=0
LA_INVERT=0
THRESHOLD=0
AUTO_BRI=1
DISPLAY_PROGRESS=0