D-Link DMF560TX 10/100 Fast Ethernet+56K Fax/Modem PC Card
Installation for Microsoft Windows Millennium
**********
*Contents*
**********
Introduction
Getting Started
Modem Diagnostics
Add LAN protocols
Troubleshooting
**************
*Introduction*
**************
Windows Millennium provides a complete "Plug and Play" System that will
automatically recognize and configure most PC Cards.
Before inserting your LanModem PC Card, the system's PCMCIA chipset
must be enabled and functioning. The PCMCIA chipset is responsible
for controlling the systems interface for PC Cards. Please consult
the system's manual or manufacture for use with Windows Millennium.
Multifunction PC Card put a heavy demand on a system's resources.
Please resolve all system conflicts, errors, and Windows Millennium
issues before installing the LanModem.
Please have the installation media for the Windows Millennium ready for
any request for files.
*****************
*Getting Started*
*****************
Power off your computer and remove all of PC Cards.
Turn on your computer and insert the DMF560TX PC Card into a free PC Card Slot.
Windows will detect this device automatically.
Insert the device driver disk into the floppy disk drive.
Choose "Specify the location of the Driver (Advanced)" and click Next.
Choose "Specify the location" and type A:. Click Next.
Expect a minor delay and the appropriate driver for this device should be found.
Click Next.
Click Finish. Then the software installation for this device will be completed successfully.
If prompted to restart Windows Millennium, click Yes.
*******************
*Modem Diagnostics*
*******************
Open the MY COMPUTER
Run the CONTROL PANEL
Run the MODEMS
Select LanModem Card and Click Properties icon
Click Diagnostics tab and Click Refresh icon
*******************
*Add LAN protocols*
*******************
Open the MY COMPUTER
Run Network Connections
Click Local Area Connection and Select File/Properties
*****************
*Troubleshooting*
*****************
When using modem application tools, type AT command and get no respones,
Select "Direct to COM2(COM3, COM4), instead of LanModem Card.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.