D-Link DGE-550T Gigabit Ethernet Adapter Installation
for Windows NT V4.0
Getting Started
---------------
- Start your Windows NT 4.0 PC normally and inserting the network
adapter into your computer.
- Open "My Computer" -> "Control Panel" -> "Networks" icons.
- Select "Add adapter" -> "Have disk" items.
Type the following (assume the driver is located at A:\)
A:\ (A: is floppy drive)
OR
D:\ (D: is CD drive)
Select the "D-Link DGE-550T ...".
- Windows NT 4.0 will copy the driver files from the driver disk.
It also will pop up the configuration window, you can assign the
"Connection Type" and "Network Address" here.
- After finishing file copy, Windows NT 4.0 will ask you to
reboot the PC. Select YES.
- Restart the computer.
Driver keywords:
----------------
- Open "My Computer" -> "Control Pannel" -> "Network" ->
Double click "D-Link DGE-550T.. ..."
Connection Type Specify the connection type for the adapter.
Default: AutoSense
Network Address You can set the Ethernet address for your adapter.
It is not recommended to use this keyword. Please
use default value if possible.
As you know two or more adapter in the same
network with same Ethernet address will cause
a little problem.
When using this keyword you need to input exactly
6 bytes of Ethernet address using one of the
following format:
xx-xx-xx-xx-xx-xx
OR
xxxxxxxxxxxx
Default: read address from adapter ROM.
802.1Q/1P VLAN You can enable it for VLAN group.
tagging Default: disable
VLAN ID This value will active after 802.1Q/1P VLAN
tagging enable.
GVRP Support GVRP and will active after 802.1Q/1P
VLAN tagging enable.
Default: enable
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.