D-Link DFE-540TX Fast Ethernet PCI Adapter Installation
for Windows 98
Getting Started
---------------
The Windows 98 installation disks or CD are needed to complete this
install.
Windows 98 Installation Procedure
---------------------------------
1. Plug PCI Ethernet adapter into the system.
2. Start your PC normally. Upon power up, the system will
indicate to you that new "PCI Ethernet Controller" hardware has
been found. Press "Next" to be continue.
3. Insert the driver diskette into floppy disk.
4. Select "Search for the best driver for your device [Recommanded]".
5. Check "Floppy disk drivers." and press "Next".
6. The system detect the necessary driver will being
install for the new hardware.
7. After finishing file copying, the Windows system will ask
you to restart the system. Select YES to reboot.
8. During system boot up, the operating system will automatically
detect the PCI Fast Ethernet adapter and install the driver for
the adapter.
Windows 98 Installation Procedure for NDIS5 driver
--------------------------------------------------
1. Plug PCI Ethernet adapter into the system.
2. Start your PC normally. Upon power up, the system will
indicate to you that new "PCI Ethernet Controller" hardware has
been found. Press "Next" to be continue.
3. Insert the driver diskette into floppy disk.
4. Select "Search for the best driver for your device [Recommanded]".
5. Check "Specify a location" and specify the path (A:\WIN98),
then press "Next".
6. The system detect the necessary driver will being
install for the new hardware.
7. After finishing file copying, the Windows system will ask
you to restart the system. Select YES to reboot.
8. During system boot up, the operating system will automatically
detect the PCI Fast Ethernet adapter and install the driver for
the adapter.
Trouble Shooting
----------------
- Everything is OK in Device Manager, but network adapter still
does't function properly. Please make sure that your Computer
name is different from others in the same network. You can change
your Computer name in
"My Computer" -> "Control Panel" -> "Network" -> "Identification"
icons
- Everything appears to be OK but network adapter still doesn't
function properly. Please make sure that the adapter is properly
connected to a network device (ex: HUB) and the "connection type"
for this adapter is set to "AutoSense" or the correct media type.
You can check it in
"My Computer" -> "Control Panel" -> "Network" -> "Properties"
icons. Select "Advanced" item.
Driver keywords
---------------
- Open "My Computer" -> "Control Pannel" -> "Network" ->
Double click "D-Link DFE-540TX Fast..", Select "Advanced" item.
Connection Type Specify the connection type for the adapter.
AutoSense:Default
100Base-Tx Full Duplex
100Base-Tx
10Base-T(Twisted Pair)
10Base-T Full Duplex
Network Address You can set the Ethernet address for your
adapter. It is not recommended to use this
keyword. As you know two or more adapter in
the same network with same Ethernet address
will cause a little problem.
When using this keyword you need to input
exactly 6 bytes of Ethernet address using
one of the following format:
xx-xx-xx-xx-xx-xx
OR
xxxxxxxxxxxx
Default: read address from adapter ROM.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.