D-Link DFE-540TX Fast Ethernet PCI Adapter Installation
for Windows NT V3.51
Getting Started
---------------
The Windows NT CD/disks are need to complete this installation
- From the "Main" window, select Control Panel
- In the Control Panel, select Network Icon
- In the Network Setup, select Add Adapter
Windows NT will display a list of all available drivers.
- Select "OTHER" for third-party adapters not included in the
list.
The program prompts for the directory containing the Ethernet drivers.
- Insert the driver diskette in Drive A, and then type
the following:
A:\
- Windows NT will attempt to locate the OEMSETNT.INF file in the
specified path. If it exists there, Windows NT will then copy
the appropriate drivers to the Windows NT system. To select
the "Normal" mode, the adapter will work in the best comptability.
And the "Turbo" mode, the adapter could get better performance.
- The drivers are now properly installed. The installation
procedure will then proceed to the next steps. Please refer to
your Windows NT installation guide for information on these
steps.
- A window will appear allowing you to specify your network
connection type and specify the network address.
Connection Type Specify the connection type for the adapter.
---------------
AutoSense:Default
100Base-Tx Full Duplex
100Base-Tx
10Base-T(Twisted Pair)
10Base-T Full Duplex
Network Address
---------------
Add nothing in the NetworkAddress field. The driver will use the
default unique ethernet address that written in the adapter's
PROM. If you want to change the ethernet address use the
following format:
xx-xx-xx-xx-xx-xx
OR
xxxxxxxxxxxx
- After the initial installation, the drivers will be permanently
installed to the Windows NT system. Subsequent accesses to the
network driver list will include these drivers as options.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.