D-Link DFE-540TX Fast Ethernet PCI Adapter Installation
for Windows 95
Getting Started
---------------
The Windows 95 installation disks or CD are need to complete this
install.
Using DFE-540TX driver
---------------------
- Windows 95 will detect the hardware, and select correct new
driver to be installed. If not, you may select the "Have Disk"
option for installation, in which case you will be prompted to
input the path where the driver located:
A:\ (assume the driver locate at A:\)
- Complete the installation.
- After this automatic process, Windows 95 should proceed to complete
boot up process and your network adapter should work normally.
Trouble Shooting
----------------
- Everything is OK in Device Manager, but network adapter still
does't function properly. Please make sure that your Computer
name is different from others in the same network. You can change
your Computer name in
"My Computer" -> "Control Panel" -> "Network" -> "Identification"
icons
- Everything appears to be OK but network adapter still doesn't
function properly. Please make sure that the adapter is properly
connected to a network device (ex: HUB) and the "connection type"
for this adapter is set to "AutoSense" or the correct media type.
You can check it in
"My Computer" -> "Control Panel" -> "Network" -> "Properties"
icons. Select "Advanced" item.
Driver keywords
---------------
- Open "My Computer" -> "Control Pannel" -> "Network" ->
Double click "D-Link DFE-540TX Fast..", Select "Advanced" item.
Connection Type Specify the connection type for the adapter.
AutoSense:Default
100Base-Tx Full Duplex
100Base-Tx
10Base-T(Twisted Pair)
10Base-T Full Duplex
Network Address You can set the Ethernet address for your
adapter. It is not recommended to use this
keyword. As you know two or more adapter in
the same network with same Ethernet address
will cause a little problem.
When using this keyword you need to input
exactly 6 bytes of Ethernet address using
one of the following format:
xx-xx-xx-xx-xx-xx
OR
xxxxxxxxxxxx
Default: read address from adapter ROM.
Store And Forward You can set "Enabled" when you have system
compatibility issue.
Default: Disabled
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.