NCSA.TXT Driver File Contents (de220_driver_031602.zip)

==================================================================
NOTES ON
Installing D-Link DE-220 Family Ethernet Adapter
For NCSA Users
==================================================================
    (c) 1997 Copyright D-Link Corporation  ALL RIGHTS RESERVED

This document contains installation notes, which is not included in the
DE-220 Family Ethernet Adapter USER'S GUIDE or onscreen instructions,
for NCSA users regarding DE-220 Family Ethernet Adapter installation.

This document contains information on the following topics:

1.0 Introduction
2.0 Installing Pcaket driver
___________________________________________________________________

1.0 Introduction
----------------
NCSA users please also refer to the following:

    -------------------------------------------------------------------
     File                  Description/Installation notes
    -------------------------------------------------------------------
     \README.TXT           For all users
     \PKTDRV\README.TXT    For all Packet driver users

2.0   Installing Pcaket driver
------------------------------

    1. To load a driver, use either of the following methods:

       Method 1:
       ---------
       In your CONFIG.SYS file, include the DEVICE command.

       Format:
       DEVICE = DE22XPD.SYS [/option] <packet_int_no>

       See \PKTDRV\README.TXT for addition parameters

       Method 2:
       ---------
       Issue DE22XPD command at the DOS command prompt.

       Format:
       DE22XPD [/option] <packet_int_no>

       See \PKTDRV\README.TXT for addition parameters

    2. You need to install NCSA TCP/IP distributions into your
       computer. (Also refer to NCSA TCP/IP distributions \INSTALL for
       more information.)

    3. Please set correct values in CONFIG.TEL which is include in
       NCSA TCP/IP distributions as follows:

       CONFIG.TEL
       ----------
            :
            :
       hardware    = packet
       ioaddr      = <iobase>
       interrupt   = <irq>
            :
            :
       Please take note the above settings must be the same as
       driver's parameters.

       Now, the NCSA TCP/IP associated programs are ready to be used.

       Examples:

       C:\> de22xpd 0x62
       C:\> edit config.tel

                 :
            hardware     = packet
            ioaddr       = 300
            interrupt    = 5
                 :

       C:\> telnet <IP_ADDRESS>


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.84