; This INF file installs the Silicon Image Serial ATA 3531 SATA Controller driver
; for the SiI 3531 controller on systems using the AMD 64-bit
; processor.
;
; Copyright (C) 2006 by Silicon Image, Inc.
; All rights reserved
[Version]
Signature="$Windows NT$"
Class=SCSIAdapter
ClassGuid={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%SI%
CatalogFile=Si3531.cat
DriverVer=11/27/2006, 1.5.14.0
[SourceDisksNames.amd64]
1=%DISKNAME%,Si3531.sys,,
[SourceDisksFiles.amd64]
Si3531.sys = 1
SilSupp.cpl = 1
SiWinAcc.sys = 1
SiRemFil.sys = 1
[DestinationDirs]
DefaultDestDir = 12
DllFiles = 11
[DriverFiles]
Si3531.sys,,,0x20
SiWinAcc.sys,,,0x20
SiRemFil.sys,,,0x20
[DllFiles]
SilSupp.cpl,,,0x20
[Manufacturer]
%SI%=SI_HDC,NTamd64
[SI_HDC.NTamd64]
%PCI\VEN_1095&DEV_3531.DeviceDesc%=SI_3531_XP, PCI\VEN_1095&DEV_3531&SUBSYS_35311095
%PCI\VEN_1095&DEV_3531.DeviceDesc%=SI_3531_XP, PCI\VEN_1095&DEV_3531&SUBSYS_14981043
%PCI\VEN_1095&DEV_3531.DeviceDesc%=SI_3531_XP, PCI\VEN_1095&DEV_3531&SUBSYS_82501043
%PCI\VEN_1095&DEV_3531.DeviceDesc%=SI_3531_XP, PCI\VEN_1095&DEV_3531&SUBSYS_320A1462
%PCI\VEN_1095&DEV_3531.DeviceDesc%=SI_3531_XP, PCI\VEN_1095&DEV_3531&SUBSYS_30D4103C
[ControlFlags]
ExcludeFromSelect.ntx86=*
;;
;; Driver install sections
;;
[SI_3531_XP.NTamd64]
Copyfiles=DriverFiles, DllFiles
CopyInf=sippd.inf
[SI_3531_XP.NTamd64.Services]
AddService=Si3531,0x00000002,SI_3531_Service_Install, Miniport_EventLog_Inst
AddService=SiFilter,0x00000000,FilterService_Install
AddService=SiRemFil, 0, RemovableDevFilter_Install
[SI_3531_XP.NTamd64.CoInstallers]
Copyfiles=DllFiles
AddReg = SI_3531_CoInstall_AddReg
[SI_3531_CoInstall_AddReg]
HKR,,CoInstallers32,0x00010000,"SilSupp.cpl, CoInstHandler"
; This will assure the Class driver sends down a Sync Cache before writting the
; hibernation file.
[SI_3531_XP.NTamd64.HW]
AddReg=SI_3531_AddHackMask.AddReg
[SI_3531_AddHackMask.AddReg]
HKR, "Classpnp", "HackMask",0x00010001, 0x10
[SI_3531_Service_Install]
DisplayName=%SI3531.SvcDesc%
ServiceType=1
StartType=0
ErrorControl=1
ServiceBinary=%12%\Si3531.sys
LoadOrderGroup=Scsi miniport
AddReg=PnPSupport_AddReg
AddReg=PortConfigure_AddReg
AddReg=ProblemDeviceList_AddReg
AddReg=ChanConfigOverrides_AddReg
AddReg=SupportedSubSystemIds_AddReg
[FilterService_Install]
DisplayName=SATALink driver accelerator
ServiceType=1
StartType=0
ErrorControl=0
ServiceBinary=%12%\SiWinAcc.sys
LoadOrderGroup=Filter
[RemovableDevFilter_Install]
DisplayName=SATALink External Device Filter
ServiceType=1
StartType=0
ErrorControl=1
ServiceBinary=%12%\SiRemFil.sys
LoadOrderGroup="PnP Filter"
AddReg=RemovableDevFilter_AddReg
; Enable removable device filter to attach to disk and cd-rom class devices.
[RemovableDevFilter_AddReg]
HKLM, System\CurrentControlSet\Control\Class\{4d36e967-e325-11ce-bfc1-08002be10318}, UpperFilters, 0x00010008, SiRemFil
HKLM, System\CurrentControlSet\Control\Class\{4d36e965-e325-11ce-bfc1-08002be10318}, UpperFilters, 0x00010008, SiRemFil
; Mark device as supporting Plug & Play on the PCI(5) bus.
[PnPSupport_AddReg]
HKR,Parameters\PnPInterface,5,0x00010001,1
[PortConfigure_AddReg]
HKR,Parameters\Device,MaximumSGList,0x00010001, 33
HKR,Parameters\Device,NumberOfRequests,0x00010001, 132
; List of devices with known configuration issues.
[ProblemDeviceList_AddReg]
HKR,ProblemDevices
HKR,ProblemDevices, %ProblemDev1Name%, 0, %ProblemDev1Value%
HKR,ProblemDevices, %ProblemDev2Name%, 0, %ProblemDev2Value%
HKR,ProblemDevices, %ProblemDev3Name%, 0, %ProblemDev3Value%
HKR,ProblemDevices, %ProblemDev4Name%, 0, %ProblemDev4Value%
HKR,ProblemDevices, %ProblemDev5Name%, 0, %ProblemDev5Value%
HKR,ProblemDevices, %ProblemDev6Name%, 0, %ProblemDev6Value%
HKR,ProblemDevices, %ProblemDev7Name%, 0, %ProblemDev7Value%
; List of controller subsystem IDs to be supported by the Si3531.sys driver
[SupportedSubSystemIds_AddReg]
HKR,SupportedSubsystemIDs,%PCI\VEN_1095&DEV_3531.DeviceDesc%,0x00010001, 0x35311095
HKR,SupportedSubsystemIDs,"%PCI\VEN_1095&DEV_3531.DeviceDesc% (ASUS 1498)",0x00010001, 0x14981043
HKR,SupportedSubsystemIDs,"%PCI\VEN_1095&DEV_3531.DeviceDesc% (ASUS 8250)",0x00010001, 0x82501043
HKR,SupportedSubsystemIDs,"%PCI\VEN_1095&DEV_3531.DeviceDesc% (MSI 73x0)", 0x00010001, 0x320A1462
HKR,SupportedSubsystemIDs,"%PCI\VEN_1095&DEV_3531.DeviceDesc% (Hewlitt Packard 30D4)", 0x00010001, 0x30D4103C
[ChanConfigOverrides_AddReg]
HKR, ChannelConfigurations, %PCI\VEN_1095&DEV_3531.DeviceDesc%, 0x00010001, 0x00000001
;*************************************************************
;The NT EventLog entries are the same for all SCSI miniports.
[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg
[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,,TypesSupported,0x00010001,7
[Strings]
SI="Silicon Image"
DISKNAME="Silicon Image SiI 3531 SATA Controller Installation Disk"
PCI\VEN_1095&DEV_3531.DeviceDesc="Silicon Image SiI 3531 SATA Controller"
SI3531.SvcDesc="SiI-3531 SATA Controller"
ProblemDev1Name="Maxtor 4D060H3 DAK05GK0"
ProblemDev1Value="MaxMode = UDMA-5"
ProblemDev2Name="HDS724040KLSA80 KFAOA32A"
ProblemDev2Value="DisableAtaQueueing"
ProblemDev3Name="HDS722525VLSA80 V36OA6MA"
ProblemDev3Value="DisableAtaQueueing"
ProblemDev4Name="HDS722516VLSA80 V34OA6MA"
ProblemDev4Value="DisableAtaQueueing"
ProblemDev5Name="Maxtor 7B250S0 BANC1B70"
ProblemDev5Value="DisableSataQueueing"
ProblemDev6Name="HTS541060G9SA00 MB3OC60D"
ProblemDev6Value="DisableSataQueueing"
ProblemDev7Name="HTS541080G9SA00 MB4OC60D"
ProblemDev7Value="DisableSataQueueing"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.