Operation Manual [1] Installation Save VCR78x_79x.exe VCR78x_79x.ini under the same folder. [2] Operation a. Make sure the camera and your PC is properly connected with the R/C cable (9Pin Dsub connector with 2 pin connector for the board camera.) Supply DC 12V to the camera and confirm the picture on the monitor. (9Pin Dsub connector embeds RS-232C / TTL converter circuit.) b. Click VCR78x_79x.exe. c. Check "REMOTE" on the first tab. d. You will find the current settings of the camera on your PC. Now, You can choose any settings that you wish to change by clicking the buttons. d.Save settings Click"Save setting" to save your last settings. ALL RIGHTS RESERVED PACIFIC CORPORATIONDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.