1. ENUWI-G2_5033_Driver.zip Driver
2. Release Note.txt File Contents

Release Note.txt Driver File Contents (ENUWI-G2_5033_Driver.zip)

*******************************************************************
*               RALINK TECHNOLOGY, CORP.                  
*              RALINK RT73 Wireless Card          
*             SOFTWARE DRIVER RELEASE NOTE
*                                                                                                                                
*******************************************************************
[Differences between V1.0.3.6 and V1.0.3.0]
1.) Fix non-encrypted data issue after 4-way handshakes.
2.) Fix undefined DBG issue.(#if DBG)
3.) Fix compile failed on FC5-kernel more than 2.6.15.
4.) Improve mlme rate while sending probe request. (11a- 4Mbps/11bg- 1Mbps)
5.) Support "make install".
6.) Modify probe request on A band, only OFDM rate will be included.
7.) Enhance nonzero length of wep key setup into ASIC with the profile.
8.) Add A-band country region code #8, #9, #10.
9.) Driver sends disassociate event to WPA Supplicant when AP turns off.
10.) Support APs used dual-mode authentication.


*******************************************************************
[V 1.0.3.0]
1.) Support WPA Supplicant
2.) Support fast roaming
3.) Support IEEE802.11H - radar detection
4.) RTS/CTS Rate set to 2Mb
5.) Add 11G Region #7 (Channel 5 ~ Channel 13)


*******************************************************************
[V 1.0.2.0]
1.) Improve ping lost
2.) Support HW radio control
3.) Support roaming from an weaker AP to a strong AP
4.) Support Adhoc rates (11b only, 11b/11g mixed, 11g only and 11a only)
5.) Bug Fixed: Adhoc mode in WPANONE
6.) Bug Fixed: Can not work well with WEP encryption used the configuration file
7.) Verify process between RaConfig(utility) and rt73 dirver
8.) Support WPAPSK Both mode (TKIP+AES)
9.) Firmware version: 1.7
10.) Improve power saving mode


*******************************************************************
[V 1.0.1.0]
1.) Prevent no error handling while reading profile and firmwave
2.) Bug fixed: an  Ad-Hoc connection under corner case of incomplete scanning
3.) Bug fixed: AES shared group key
4.) Support Infra "11g only" 
5.) Support Adhoc rates including 11b only and 11b/g mixed 
6.) Support Asic Advanced Power Saving
7.) Short/Long slot time or Short/Long preamble follow by the capability of  beacon
8.) Firmware version: 1.2


*******************************************************************
[V 1.0.0.0]
1.) Support little endian platform
2.) Support infrastructure and adhoc mode
3.) Supoort OPEN or SHARED or WPA-PSK or WPA2-PSK or WPA-NONE authentication method  
4.) Supoort NONE, WEP, TKIP and AES encryption