Installation IPC 64/19 front panel driver for Windows 95 ======================================================== Files on Disk: ============== README.TXT This file IPC6419.INF Installation information for Windows 95 IPC6419.DRV Driver for IPC 64/19 front panel Installation: ============= Installing IPC 6419 driver: --------------------------- - Open Menu: Start, Settings, "Control pannel" - Open Icon "Add New Hardware" - Disable scanning for new Hardware (Set NO) - Select Hardware types: "Keyboard" - Press Buttom: "Have Disk..." - Write Your Disk or Path of source (IPC6419.INF) and press OK - Select "IPC6419 Frontpanel" and press Next. Information: You can select the other mode after installation also. - Select Finish to install files now - Windows will be Restart the system after copying files and setup in envirion. Read the next session, if You have not installed german keyboard layout, before You reboot. - At the next boot, the driver for IPC 6419 front pannel will be activate. Installing driver for german keys: ---------------------------------- Please note: The device driver of IPC 6419 needs german layout of keyboard. If You want using german IPC 6419 front pannel and external english keyboard (setup and so on), You can install both layouts and select it on taskbar. To install german layout of keyboard follow steps: - Open Menu: Start, Settings, "Control pannel" - Open Icon "Keyboard" - Select register "Language" - Press Buttom "Add..." - Select German (Standard) and press OK - Select DE German (Standard) and press buttom "Set as Default" - Close the Keyboard Properties with "Applay" and "OK" Troubblelshooting ================= How I can configure driver ? ---------------------------- Edit C:\WINDOWS\IPC6419.INI with Notepad. Save Your configuration and restart Windows. UpperCase=0 (default) If You press ALPHA-0 the driver will be send a little type 'z' to Windows programms. UpperCase=1 If You press ALPHA-0 the driver will be send a big type 'Z' to Windows programms. ToggleAlpha=0 (default) If You need letters, You must press down two keys: ALPHA and the key. (ALPHA-0 for Z). ToggleAlpha=1 If You press ALPHA, the driver will be toggle the internel state of ALPHA. All next keys will be send as alpha. If You need digits, You must be press the key ALPHA again to switch off the internal flag. EnablerCtrl=1 (default) You can use the key CTRL-F12 to activate and deactivate driver for IPC6419 front panel. EnablerCtrl=0 The key CTRL-F12 have no function an driver for IPC6419. How I can uninstall the driver IPC6419 ? ---------------------------------------- - Open Menu: Start, Settings, "Control pannel" - Open Icon "System" - Select register "Device Manager" - Select "Keybord" - Select "IPC6419 Frontpanel" and press Remove. - Open Menu: Start, Run... - Type "SYSEDIT" and press OK - Select C:\WINDOWS\SYSTEM.INI - Locking in session [boot] for the line begin "drivers=" - Remove the name "ipc6419.drv" at the end of line - Exit the System Configuration Editor (ALT-F4 or Menu File-Exit). Save Your changing of SYSTEM.INI. - Restart Your System How I can disable Driver for externel keyboard, quickly ? --------------------------------------------------------- Use CTRL-F12 to diable/anable IPC6419 driver. The LED NUMLOCK diaplays the state of driver. NUMLOCK ON: IPC6419 driver is disable. NUMLOCK OFF: IPC6419 driver works. This key was only accept, if in C:\WINDOWS\IPC6419.INI this option was enabled "EnablerCtrl=1" at Windows start. I can not use keys Shift for textmark ? --------------------------------------- Use mouse for mark Your text! Or press the CTRL-F12 for enable/disable the driver IPC6419. Cursor keys on frontpanel dos'nt work with NUMLOCK on ? ------------------------------------------------------- Windows converted the key not correct, if You set NUMLOCK on. If You press key SHIFT or ALPHA and a other key, the driver check the state of NUM-LOCK and correct this problem. Cursor keys on external keyboard dos'nt work ? ---------------------------------------------- Use CTRL-F12 to activate NUMLOCK and disable IPC 6419 driver temporary!Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.