;***********************************************************************
;
; Module Name: OEMSETNT.INF
; Author: Huntsville Development Center
; $Archive: /Projects/Tigris and Derivatives Branches/Branch099/Reference Designs/Tigris/Install Files/INF/WAN/NT4/Oemsetnt.inf $
; $Date: 12/18/01 12:34p $
;
; Copyright © Conexant Systems Inc. 1999 - 2001. All rights reserved
;
; Module Description:
; WinNT4 installation file for the
; Conexant AccessRunner PCI ADSL WAN Adapter
;
;***********************************************************************
;***********************************************************************
; OPTION TYPE
; -----------
; This identifies the Option type we are dealing with. The different
; possible types are:
;
; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ...
;
; Types specific to networking:
;
; NetAdapter, a netcard / adapter combination or just a netcard
; NetDriver, just a netcard driver
; NetTransport, a complete NDIS-compliant TDI transport stack
; NetService, an NT networking service
; NetWork, a complete network ensemble.
; NetProvider a complete network which supports NT MPR protocol
;***********************************************************************
[Identification]
OptionType = NetAdapter
;***********************************************************************
; PlatformsSupported
; ------------------
; This identifies the platforms supported by the adapter card.
; Possible types are:
;
; ISA, EISA, MCA, and PCI
;***********************************************************************
[PlatformsSupported]
PCI
;***********************************************************************
; OPTION LIST
; -----------
; This section lists the OEM Option key names. These keys are locale
; independent and used to represent the option in a locale independent
; manner.
;
;***********************************************************************
[Options]
Conexant_PCI_ADSL_WAN_Driver
;***********************************************************************
;
;***********************************************************************
;ToDo Add new registry entry default values here
[FileConstants]
; LED/Relay Enable.
; Set LED_RELAY_ENABLE = LED_HW if hardware supports LEDs.
; Otherwise set LED_RELAY_ENABLE = RELAY_HW
RELAY_HW = 0
LED_HW = 1
LED_RELAY_ENABLE = $(RELAY_HW)
InfName = "Conexant_PCI_ADSL_WAN_Driver.INF"
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "Conexant"
ProductCode = "4"
HardwareCode = "1"
ProductMajorVersion = "2"
ProductMinorVersion = "099"
ProductVersion = $(ProductCode)"."$(HardwareCode)"."$(ProductMajorVersion)"."$(ProductMinorVersion)
; This description is displayed in the "Add RAS Device" dialog box as a "Ras Capable Device"
ProductSoftwareName = "CnxTgN"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\CnxTgN.sys"
NetRuleSoftwareType = "Conexant_PCI_ADSL_WAN_DriverSys Conexant_PCI_ADSL_WAN_DriverDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """Conexant_PCI_ADSL_WAN_DriverSys"" yes no container"
NetRuleSoftwareClass = {"Conexant_PCI_ADSL_WAN_DriverDriver basic"}
NetRuleSoftwareBindable = {"Conexant_PCI_ADSL_WAN_DriverDriver Conexant_PCI_ADSL_WAN_DriverAdapter non exclusive 100"}
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareType = "Conexant_PCI_ADSL_WAN_Driver Conexant_PCI_ADSL_WAN_DriverAdapter"
NetRuleHardwareClass = {"Conexant_PCI_ADSL_WAN_DriverAdapter basic"}
DeviceMap = "HARDWARE\DEVICEMAP"
TapiDevices = "TAPI DEVICES"
TapiDeviceKey = $(ProductHardwareName)
TapiMediaType = "ADSL"
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
DeviceKeyName = "Device"
CurrentControlSet = "SYSTEM\CurrentControlSet"
ServicesBaseName = $(CurrentControlSet)"\Services"
; Microsoft Run Key
MicrosoftRunKey = $(!NTN_SoftwareBase)"\Microsoft\Windows\CurrentVersion\Run"
; TCP/IP Parameters Key
; HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
TcpWindowSizeKey = $(ServicesBaseName)"\Tcpip\Parameters"
TcpWindowSizeValue = 40800
;Product Software Registry Key for Applications
CompanySoftwareSubkey = "Conexant" ; Do not modify this string
ProductSoftwareSubkey = "AccessRunner ADSL" ; Do not modify this string
CompanySoftwareKey = $(!NTN_SoftwareBase)"\"$(CompanySoftwareSubkey)
ProductSoftwareKey = $(!NTN_SoftwareBase)"\"$(CompanySoftwareSubkey)"\"$(ProductSoftwareSubkey)
ProductId = "10" ; 0x00000010
; Product Connectoids Registry Key
ConnectoidsSubkey ="Connectoids"
Instance0000Subkey ="0000"
ProductConnectoidsKey = $(!NTN_SoftwareBase)"\"$(CompanySoftwareSubkey)"\"$(ProductSoftwareSubkey)"\"$(ConnectoidsSubkey)
ProductConnectoidInstance0000Key = $(ProductConnectoidsKey)"\"$(Instance0000Subkey)
; Product Connectoids RASENTRY Registry Values
ConnectoidRasEntryOptions = "2218" ; Bitmask of RASEO_xxx flags in hexadecimal
ConnectoidRasEntryNetProtocols = "7" ; Bitmask of RASNP_xxx flags in hexadecimal
; Product Shortcuts Registry Key
ProductShortcutsSubkey = "Shortcuts"
ProductShortcutsKey = $(!NTN_SoftwareBase)"\"$(CompanySoftwareSubkey)"\"$(ProductSoftwareSubkey)"\"$(ProductShortcutsSubkey)
; Shortcuts
ConnectoidShortcutIconIndex = "0" ; Zero-based icon index in decimal
ConnectoidShortcutLocations = "18" ; Bitmask of shortcut locations in hexadecimal
AutologShortcutLocations = "8" ; Bitmask of shortcut locations in hexadecimal
ControlPanelAppletShortcutLocations = "18" ; Bitmask of shortcut locations in hexadecimal
HelpShortcutLocations = "8" ; Bitmask of shortcut locations in hexadecimal
TaskBarAppShortcutLocations = "8" ; Bitmask of shortcut locations in hexadecimal
UninstallShortcutLocations = "8" ; Bitmask of shortcut locations in hexadecimal
;Product Run Registry Value
CnxDslTaskBar = "CnxDslTb.exe"
ADSLNet = "dslnet.exe" ;
;Library Driver
LibraryDriverName = "CnxTgS"
;SYSTEM\CurrentControlSet\Services\CnxTgS
LibraryServicesKey = $(ServicesBaseName)"\"$(LibraryDriverName)
;Arbitrator 0 Driver
Arbitrator0DriverName = "CnxTgR"
Arbitrator0SubKeyName = $(Arbitrator0DriverName)"0"
;SYSTEM\CurrentControlSet\Services\CnxTgR
Arbitrator0ServicesKey = $(ServicesBaseName)"\"$(Arbitrator0DriverName)
;SYSTEM\CurrentControlSet\Services\CnxTgR\Device\CnxTgR0
Arbitrator0ServicesSubKey = $(Arbitrator0ServicesKey)"\"$(DeviceKeyName)"\"$(Arbitrator0SubKeyName)
;Arbitrator 1 Driver
Arbitrator1DriverName = "CnxTgR"
Arbitrator1SubKeyName = $(Arbitrator1DriverName)"1"
;SYSTEM\CurrentControlSet\Services\CnxTgR
Arbitrator1ServicesKey = $(Arbitrator0ServicesKey)
;SYSTEM\CurrentControlSet\Services\CnxTgR\Device\CnxTgR0
Arbitrator1ServicesSubKey = $(Arbitrator1ServicesKey)"\"$(DeviceKeyName)"\"$(Arbitrator1SubKeyName)
;Pump Controller Driver
PumpControllerDriverName = "CnxTgP"
PumpControllerSubKeyName = $(PumpControllerDriverName)"0"
;SYSTEM\CurrentControlSet\Services\CnxTgP
PumpControllerServicesKey = $(ServicesBaseName)"\"$(PumpControllerDriverName)
;SYSTEM\CurrentControlSet\Services\CnxTgP\Device\CnxTgP0
PumpControllerServicesSubKey= $(PumpControllerServicesKey)"\"$(DeviceKeyName)"\"$(PumpControllerSubKeyName)
;ADSL Driver
AdslDriverName = "CnxTgN"
; Services Defaults
; Library
ProductTgSGroup = "PNP_TDI"
ProductTgSStart = 1 ;SERVICE_SYSTEM_START
ProductTgSTag = 1
ProductTgSType = 1 ;SERVICE_KERNEL_DRIVER
ProductTgSErrorControl = 1
; Arbitrator
ProductTgRGroup = "NDIS"
ProductTgRStart = 1 ;SERVICE_SYSTEM_START
ProductTgRTag = 1
ProductTgRType = 1 ;SERVICE_KERNEL_DRIVER
ProductTgRErrorControl = 1
; Pump Controller
ProductTgPGroup = "NDIS"
ProductTgPStart = 1 ;SERVICE_SYSTEM_START
ProductTgPTag = 2
ProductTgPType = 1 ;SERVICE_KERNEL_DRIVER
ProductTgPErrorControl = 1
; Services SubKey Defaults
ProductFirmWare = "CnxTgF.hex"
ProductFunctionIdentifier0 = 0
ProductFunctionIdentifier1 = 1
ProductFunctionIdentifier2 = 2
ProductFunctionIdentifier3 = 3
ProductGpioDirectionMask = 383 ;0x17F
ProductGpioEdgeMask = 0
ProductGpioADSLFunctionMask = 383 ;0x17F
ProductGpioARMFunctionMask = 256 ;0x100
ProductHwDebugFlag = 0
ProductHwIdArb0 = 351344144 ;0x14f11610
ProductHwIdArb1 = 351344145 ;0x14f11611
ProductNumberOfChildren = 0
ProductPhysicalDriverType = 1
; Network Device Parameter Defaults
ProductAddressList = "1 0 0*1 1 0*"
ProductAdvancedKeys = 85
ProductAdvancedMode = 0
ProductAdvancedTabs = 32768
ProductAdvancedTabsA = 11856
ProductAdvancedTabsC = 33088
ProductAdvancedTabsE = 999423
ProductAdvancedTabsP = 540497
ProductAdslHeadEnd = 0
ProductAdslHeadEndEnvironment = 0
ProductAdslTelcoId = 0
ProductAdslOption1 = 0
ProductAdslOption2 = 0
ProductAdslOption3 = 10
ProductAdslOption4 = 12
ProductAdslOption5 = 2
ProductAdslOption6 = 3
ProductAdslOption7 = 0
ProductAdslOption8 = 0
ProductAdslOption9 = 0
ProductAdslOption10 = 0
ProductAdslOption11 = 0
ProductAdslOption12 = 0
ProductAdslOption13 = 0
ProductAdslOption14 = 0
ProductAdslOption15 = 0
ProductAdslOption16 = 0
ProductAdslOption17 = 0
ProductAdslOption18 = 0
ProductAdslOption19 = 0
ProductAdslOption20 = 0
ProductAutoSenseInitialTimeout = 0
ProductAdslCRCIncrementFar = 0
ProductAdslCRCRetrainThresholdFar = 0
ProductAdslCRCThresholdFar = 0
ProductAdslCRCThresholdNear = 14
ProductAdslSESRetrainThresholdNear = 5
ProductAdslSNRMarRetrainThresholdNear = 0
ProductAdslSNRMarThresholdNear = 0
ProductASHandshakeMode = 0
ProductASWiringMode = 0
ProductASWiringSelection = 1
ProductASWiringComboGPIO = {03,03,03,03,05,05,05,05,00,00,00,00,00,00,00,00}
ProductASWiringRelayDelay = 200
ProductASWiringRelayEnergized = 1
ProductASWiringOrder = {01,02,00,00}
ProductDebugFlag = 0
ProductDisplayExtPhysLayerStats = 0
ProductEncapsulationMode = 0
ProductHardwareName = "CnxTgN"
ProductHwIdPumpController = 351344144 ;0x14f11610
ProductHwIdDSL = 351344145 ;0x14f11611
ProductMaxTransmit = 50
ProductOAMFaultManagementControl = "3"
ProductPciVendorId = "14F1"
ProductPciDeviceId = "1611"
ProductPersistentAutodialEnableOnInstall = "0"
ProductRxMaxFrameSize = 1500
ProductRxBufAllocLimit = 50
ProductSoundKeyName = "ConexantADSL" ; Do not modify this string
ProductTxMaxFrameSize = 1500
ProductVcDisconnectDelay = 30000
ProductVcList = "0 64 0 8 2B 0 "
ProductVendorDescription = "Conexant Systems, Inc."
ProductVendorId = "ROK"
ProductWanAddress = "ROKID0"
DiskName = "Conexant AccessRunner Installation Disk"
; LED Option Parameter Defaults
ProductLedASWiringNumCombos = 0
ProductLedLinkStatusEnable = 1
ProductLedDataTrafficEnable = 1
; Relay Option Parameter Defaults
ProductRelayASWiringNumCombos = 2
ProductRelayLinkStatusEnable = 0
ProductRelayDataTrafficEnable = 0
; ADSL Parameter Defaults
;***********************************************************************
;
;***********************************************************************
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
LibraryKeyParameters = ""
Arb0KeyParameters = ""
Arb1KeyParameters = ""
PumpControllerKeyParameters = ""
ServicesKeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
;***********************************************************************
;
;***********************************************************************
[Date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
;***********************************************************************
;
;***********************************************************************
[Identify]
Read-Syms Identification
Set Status = STATUS_SUCCESSFUL
Set Identifier = $(OptionType)
Set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;***********************************************************************
;
;***********************************************************************
[ReturnOptions]
Set Status = STATUS_FAILED
Set OptionList = {}
Set OptionTextList = {}
Set LanguageList = ^(LanguagesSupported, 1)
IfContains(i) $($0) in $(LanguageList)
IfStr(i) $($1) == ""
GoTo SetOptions
EndIf
Set PlatformList = ^(PlatformsSupported, 1)
IfContains(i) $($1) in $(PlatformList)
GoTo SetOptions
Else
Set Status = STATUS_NOTSUPPORTED
GoTo ExitReturnOptions
EndIf
Else
Set Status = STATUS_NOLANGUAGE
GoTo ExitReturnOptions
EndIf
SetOptions = +
Set OptionList = ^(Options, 1)
Set OptionTextList = ^(OptionsText$($0), 1)
Set Status = STATUS_SUCCESSFUL
ExitReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;***********************************************************************
;
;***********************************************************************
[InstallOption]
Set Status = STATUS_FAILED
; Setup passes the following parameters to the [InstallOption] section:
Set Option = $($1) ; OptionID to install
Set SourceDirectory = $($2) ; SourceDirectory Set RasDir = $($2)
Set RasDir = $($2) ; AddCopy (YES | NO)
Set AddCopy = $($3) ; DoCopy (YES | NO)
Set DoCopy = $($4) ; DoConfig (YES | NO)
Set DoConfig = $($5)
Set LanguageList = ^(LanguagesSupported, 1)
IfContains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
EndIf
Set OldDebugControl = $(!DebugOutputControl)
Set !DebugOutputControl = 1
Set-Subst LF = "\n"
Read-Syms GeneralConstants
Read-Syms FileConstants
Read-Syms DialogConstants$(!STF_LANGUAGE)
IfStr(i) $(!NTN_Origination) == "NCPA"
Set Continue = $(OK)
EndIf
Read-Syms FileConstants$(!STF_LANGUAGE)
Detect Date
Set-Title $(FunctionTitle)
Set to = Begin
Set from = Begin
Set CommonStatus = STATUS_SUCCESSFUL
EndWait
;***********************************************************************
;
;***********************************************************************
Begin = +
Debug-Output $(InfName)": 173 Begin."
Set ActivateDetection = FALSE
IfStr(i) $(!NTN_InstallMode) == deinstall
Set StartLabel = RemoveAdapter
Else-IfStr(i) $(!NTN_InstallMode) == Update
Set StartLabel = UpgradeSoftware
Else-IfStr(i) $(!NTN_InstallMode) == bind
Set StartLabel = BindingAdapter
Else-IfStr(i) $(!NTN_InstallMode) == configure
Set StartLabel = ConfigureAdapter
Set ActivateDetection = TRUE
Set CommonStatus = STATUS_REBOOT
IfStr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error: cannot get an error string."
GoTo ShellCodeError
EndIf
Set Error = $($R0)
Set from = end
Set to = end
GoTo NonFatalInfo
EndIf
Else
Set StartLabel = InstallAdapter
Set ActivateDetection = TRUE
Set OEM_ABANDON_OPTIONS = {}
Set OEM_ABANDON_SOFTWARE = FALSE
Set OEM_ABANDON_ON = TRUE
EndIf
Set DetectedCard = FALSE
IfStr(i) $(ActivateDetection) != TRUE
Debug-Output $(InfName)": Setting DetectedCard to FALSE ."
GoTo $(StartLabel)
EndIf
IfStr(i) $(!STF_NCDETECT) == YES
IfStr(i) $(!STF_NCOPTION) == $(Option)
Set DetectedCard = TRUE
Debug-Output $(InfName)": Setting DetectedCard to TRUE"
EndIf
EndIf
; (THD) 12.9.
; Shell "" DebugConfiguration "After parameter querying"
Set from = FatalError
Set to = FatalError
GoTo $(StartLabel)
;***********************************************************************
;
;***********************************************************************
InstallAdapter = +
Debug-Output $(InfName)": 228 InstallAdapter"
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
IfStr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
IfStr(i) !(NTN_RegBase) == $(ProductKeyName)
Debug-Output $(InfName)": 233 ProductKeyName exists"
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error: cannot get an error string."
GoTo ShellCodeError
EndIf
GoTo end
Else
Shell $(UtilityInf), CardExistedDlg
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error: cannot get an error string."
GoTo ShellCodeError
EndIf
IfStr(i) $($R1) != "OK"
Set CommonStatus = STATUS_USERCANCEL
GoTo end
EndIf
Set OldVersionExisted = $(TRUE)
EndIf
EndIf
Set CurrParamSettings = {}
Debug-Output $(InfName)": 256 Set Current Parameter Settings."
GoTo AdapterSetup
EndIf
StartWait
Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
EndWait
IfStr(i) $($R0) != STATUS_SUCCESSFUL
GoTo AdapterSetup
EndIf
Set DetectedParams = $($R1)
Debug-Output $(InfName)": Calling Param_SetDefaults to merge detected params"
Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
GoTo AdapterSetup
;***********************************************************************
;
;***********************************************************************
ConfigureAdapter = +
Debug-Output $(InfName)": 277 Configure Adapter."
IfStr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
IfStr $(KeyProduct) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output $(InfName)": Cannot find component product key"
GoTo FatalRegistry
EndIf
EndIf
Debug-Output $(InfName)": Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": FindService shell failure"
GoTo ShellCodeError
EndIf
IfStr(i) $($R0) != NO_ERROR
Debug-Output $(InfName)": FindService Shell error: "$($R0)
GoTo FatalRegistry
EndIf
Set KeyParameters = $($R2)
CloseRegKey $($R1)
IfStr $(KeyParameters) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output $(InfName)": Cannot find component service"
GoTo FatalRegistry
EndIf
Set OldVersionExisted = $(TRUE)
Set ValueName = ""
Set ValueData = ""
Set ValueStr = ""
Set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
Set ValueItem = $($)
Set ValueName = *($(ValueItem),1)
Set ValueData = *($(ValueItem),4)
Debug-Output $(InfName)": "$(ValueName)"="$(ValueData)
; (THD)
IfStr(i) $(ValueName) == "BusNumber"
Debug-Output $(InfName)": 319 Set BusNumber."
set BusNumber = $(ValueData)
Else-IfStr(i) $(ValueName) == "BusType"
Debug-Output $(InfName)": 322 Set BusType."
set BusType = $(ValueData)
Else-IfStr(i) $(ValueName) == "AddressList"
Debug-Output $(InfName)": 335 Set TapiAddressList."
set TapiAddressList = $(ValueData)
EndIf
EndForListDo
Shell $(ParamInf) Param_SaveValues
Set CurrParamSettings = $($R0)
;***********************************************************************
;
;***********************************************************************
AdapterSetup = +
; (THD) 12.9.
; Shell "" DebugConfiguration "before displaying dialog"
Set from = AdapterOptions
Shell $(ParamInf) Param_ParameterConfidence
IfStr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output $(InfName)": parameter confidence too low to bypass configuration"
GoTo AdapterOptions
EndIf
IfStr(i) $(DetectedCard) == TRUE
IfStr(i) $(!STF_INSTALL_MODE) != CUSTOM
GoTo AdapterVerify
EndIf
EndIf
;***********************************************************************
;
;***********************************************************************
AdapterOptions = +
;
; 5 -> PCI Bus
;
Set BusType = 5
;
; VendorID is decimal for 0x14F1 (PCI Vendor ID)
; DeviceID is decimal for 0x1610 (PCI Device ID)
;
Set VendorID = 5361
Set DeviceID = 5648
Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Set ShellErrorLoc = S08
GoTo ShellCodeError
EndIf
; Check to see if found any cards
IfStr(i) $($R0) == {}
set Error = $(NoHardwareFound)
set CommonStatus = USER_CANCEL
set from = end
Goto NonFatalInfo
EndIf
ForListDo $(AdapterList)
Set BusNumber = *($($),1)
Set DeviceNumber = *($($),2)
Set FunctionNumber = *($($),3)
EndForListDo
;***********************************************************************
;
;***********************************************************************
AdapterVerify = +
; (THD) 12.9.
; Shell "" DebugConfiguration "after running dialog"
Debug-Output $(InfName)": 377 Adapter Verify."
IfStr(i) $(DetectedCard) != TRUE
Shell $(ParamInf) Param_SaveValues
Set NewParamSettings = $($R0)
IfStr(i) $(CurrParamSettings) == {}
Set DiffParamSettings = $(NewParamSettings)
Else
Shell $(ParamInf) Param_DiffValues $(CurrParamSettings)
Set DiffParamSettings = $($R0)
EndIf
Debug-Output $(InfName)": Calling Param_VerifyResources"
Shell $(ParamInf) Param_VerifyResources $(DiffParamSettings)
IfStr(i) $($R0) == STATUS_SUCCESSFUL
Debug-Output $(InfName)": Param_VerifyResources succeeded"
GoTo SkipOptions
EndIf
Else
Set CardVerifyIndex = $(!STF_NCDETCARD)
Debug-Output $(InfName)": Calling Param_VerifyCard"
Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
IfStr(i) $($R0) == STATUS_SUCCESSFUL
Debug-Output $(InfName)": Param_VerifyCard succeeded"
GoTo SkipOptions
EndIf
EndIf
Set from = AdapterOptions
Set to = SkipOptions
Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error: cannot get an error string."
GoTo ShellCodeError
EndIf
Set Error = $($R0)
GoTo WarningMsg
;***********************************************************************
;
;***********************************************************************
SkipOptions =+
Debug-Output $(InfName)": 417 Skip Options "
IfInt $(OldVersionExisted) == $(TRUE)
IfStr(i) $(!NTN_InstallMode) == configure
Debug-Output $(InfName)": 420 NTN_InstallMode == configure "
GoTo WriteParameters
EndIf
EndIf
StartWait
IfInt $(OldVersionExisted) == $(FALSE)
IfStr(i) $(!NTN_InstallMode) == "install"
IfStr(i) $(DoCopy) == "YES"
Debug-Output $(InfName)": 428 DoCopy == YES "
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SourceDirectory) YES
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
GoTo ShellCodeError
Else-IfStr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
GoTo ShellCodeError
EndIf
Set Error = $($R0)
GoTo FatalError
Else-IfStr(i) $($R0) == STATUS_USERCANCEL
GoTo SuccessfulOption
EndIf
Set SourceDirectory = $($R1)
EndIf
Install "Install-Option"
IfStr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
GoTo ShellCodeError
EndIf
Set Error = $($R0)
GoTo FatalError
EndIf
EndIf
;***********************************************************************
;
; Create Product Software Keys and SubKeys for Applications
;
;***********************************************************************
Debug-Output $(InfName)": Create Product Software Keys"
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_SoftwareBase) $(!REG_KEY_CREATE_SUB_KEY) hSoftwareKey
IfStr $(hSoftwareKey) != ""
Debug-Output $(InfName)": Add Company Software subkey."
EndIf
; Create Company Registry Subkey
CreateRegKey $(hSoftwareKey) {$(CompanySoftwareSubkey), 0, GenericClass} "" $(!REG_KEY_CREATE_SUB_KEY) "" hCompanyKey
Debug-Output $(InfName)": "$(!NTN_SoftwareBase)"\"$(CompanySoftwareSubkey)
Debug-Output $(InfName)$(hCompanyKey)
IfInt $(RegLastError) != 0
Debug-Output $(InfName)": RegLastError = "$(RegLastError)
; Open the Company subkey
OpenRegKey $(!REG_H_LOCAL) "" $(CompanySoftwareKey) $(!REG_KEY_CREATE_SUB_KEY) hCompanyKey
Debug-Output $(InfName)": Open Company Software subkey: "$(CompanySoftwareKey)
Debug-Output $(InfName)$(hCompanyKey)
IfInt $(RegLastError) != 0
Debug-Output $(InfName)": RegLastError = "$(RegLastError)
EndIf
EndIf
IfStr $(hCompanyKey) != ""
Debug-Output $(InfName)": Add Company Product subkey."
EndIf
; Create Product Registry Subkey
CreateRegKey $(hCompanyKey) {$(ProductSoftwareSubkey), 0, GenericClass} "" $(!REG_KEY_CREATE_SUB_KEY) "" hProductKey
Debug-Output $(InfName)": "$(!NTN_SoftwareBase)"\"$(CompanySoftwareSubkey)"\"$(ProductSoftwareSubkey)
Debug-Output $(InfName)$(hProductKey)
IfInt $(RegLastError) != 0
Debug-Output $(InfName)": RegLastError = "$(RegLastError)
EndIf
IfStr $(hProductKey) != ""
Debug-Output $(InfName)": Company Product subkey created"
EndIf
; Create Connectoids Registry Subkey
CreateRegKey $(hProductKey) {$(ConnectoidsSubkey), 0, GenericClass} "" $(!REG_KEY_CREATE_SUB_KEY) "" hConnectoidsKey
Debug-Output $(InfName)": "$(!NTN_SoftwareBase)"\"$(CompanySoftwareSubkey)"\"$(ProductSoftwareSubkey)"\"$(ConnectoidsSubkey)
Debug-Output $(InfName)$(hConnectoidsKey)
IfInt $(RegLastError) != 0
Debug-Output $(InfName)": RegLastError = "$(RegLastError)
EndIf
IfStr $(hConnectoidsKey) != ""
Debug-Output $(InfName)": Connectoids subkey created"
EndIf
; Create Connectoid Instance 0000 Subkey
CreateRegKey $(hConnectoidsKey) {$(Instance0000Subkey), 0, GenericClass} "" $(!REG_KEY_CREATE_SUB_KEY) "" hConnectoidInstanceKey
Debug-Output $(InfName)": "$(ProductConnectoidsKey)"\"$(Instance0000Subkey)
Debug-Output $(InfName)$(hConnectoidInstanceKey)
IfInt $(RegLastError) != 0
Debug-Output $(InfName)": RegLastError = "$(RegLastError)
EndIf
IfStr $(hConnectoidInstanceKey) != ""
Debug-Output $(InfName)": Connectoid Instance 0000 subkey created"
EndIf
; Create Product Shortcuts Registry Subkey
CreateRegKey $(hProductKey) {$(ProductShortcutsSubkey), 0, GenericClass} "" $(!REG_KEY_CREATE_SUB_KEY) "" hProductShortcutsKey
Debug-Output $(InfName)": "$(!NTN_SoftwareBase)"\"$(CompanySoftwareSubkey)"\"$(ProductSoftwareSubkey)"\"$(ProductShortcutsSubkey)
Debug-Output $(InfName)$(hProductShortcutsKey)
IfInt $(RegLastError) != 0
Debug-Output $(InfName)": RegLastError = "$(RegLastError)
EndIf
IfStr $(hProductShortcutsKey) != ""
Debug-Output $(InfName)": Product Shortcuts subkey created"
EndIf
CloseRegKey $(hProductsShortcutsKey)
CloseRegKey $(hConnectoidInstanceKey)
CloseRegKey $(hConnectoidsKey)
CloseRegKey $(hProductKey)
CloseRegKey $(hCompanyKey)
CloseRegKey $(hSoftwareKey)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductSoftwareKey) $(!REG_KEY_SET_VALUE) hProductKey
;ToDo Add Product Software Key registry values here
;*********************************************************************************************************
; REGISTRY VALUE NAME DATA TYPE DEFAULT VALUE
;*********************************************************************************************************
Set NewProductSoftwareValueList = {+
{CompanyName, $(NoTitle), $(!REG_VT_SZ), $(CompanyName) },+
{DeviceName, $(NoTitle), $(!REG_VT_SZ), $(ProductHardwareTitle) },+
{ProductId, $(NoTitle), $(!REG_VT_SZ), $(ProductId) },+
{ProductName, $(NoTitle), $(!REG_VT_SZ), $(ProductName) },+
{ShortProductName, $(NoTitle), $(!REG_VT_SZ), $(ShortProductName) },+
{TaskbarAppTitle, $(NoTitle), $(!REG_VT_SZ), $(TaskbarAppTitle) }+
{CustomerVersion, $(NoTitle), $(!REG_VT_SZ), $(CustomerVersion) }+
}
Debug-Output $(InfName)": Add Registry Values to Product Software Key."
Set ProductSoftwareKeyParameters = $(hProductKey)
Shell $(UtilityInf), AddValueList, $(ProductSoftwareKeyParameters), $(NewProductSoftwareValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(InfName)": Registry error: Add Product Software Key registry value list"
Shell $(subroutineinf), SetupMessage $(!STF_LANGUAGE) WARNING +
"Could not Add Product Software Key registry values"
GoTo FatalRegistry
EndIf
CloseRegKey $(hProductKey)
;***********************************************************************
;
; Create Connectoid Instance 0000 registry values
;
;***********************************************************************
Debug-Output $(InfName)": Create Connectoid Instance 0000 registry values"
OpenRegKey $(!REG_H_LOCAL) "" $(ProductConnectoidInstance0000Key) $(!REG_KEY_SET_VALUE) hConnectoidInstanceKey
;ToDo Add Connectoid Instance 0000 Key registry values here
;*********************************************************************************************************
; REGISTRY VALUE NAME DATA TYPE DEFAULT VALUE
;*********************************************************************************************************
Set NewConnectoidInstanceValueList = {+
{ConnectoidName, $(NoTitle), $(!REG_VT_SZ), $(ConnectoidName) },+
{ShortcutDescription, $(NoTitle), $(!REG_VT_SZ), $(ConnectoidShortcutDescription) },+
{ShortcutFolderName, $(NoTitle), $(!REG_VT_SZ), $(ShortcutFolderName) },+
{ShortcutIconFilePath, $(NoTitle), $(!REG_VT_SZ), $(ConnectoidShortcutIconFile) },+
{ShortcutIconIndex, $(NoTitle), $(!REG_VT_SZ), $(ConnectoidShortcutIconIndex) },+
{ShortcutLocations, $(NoTitle), $(!REG_VT_SZ), $(ConnectoidShortcutLocations) },+
{RasEntryOptions, $(NoTitle), $(!REG_VT_SZ), $(ConnectoidRasEntryOptions) },+
{RasEntryNetProtocols, $(NoTitle), $(!REG_VT_SZ), $(ConnectoidRasEntryNetProtocols) }+
}
Debug-Output $(InfName)": Add Registry Values to Connectoid Instance 0000 Key."
Set ConnectoidInstanceKeyParameters = $(hConnectoidInstanceKey)
Shell $(UtilityInf), AddValueList, $(ConnectoidInstanceKeyParameters), $(NewConnectoidInstanceValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(InfName)": Registry error: Add Connectoid Instance Key registry value list"
Shell $(subroutineinf), SetupMessage $(!STF_LANGUAGE) WARNING +
"Could not Add Connectoid Instance Key registry values"
GoTo FatalRegistry
EndIf
CloseRegKey $(hConnectoidInstanceKey)
;***********************************************************************
;
; Create Product Shortcuts registry values
;
;***********************************************************************
Debug-Output $(InfName)": Create Product Shortcuts registry values"
OpenRegKey $(!REG_H_LOCAL) "" $(ProductShortcutsKey) $(!REG_KEY_SET_VALUE) hProductShortcutsKey
;ToDo Add Product Shortcuts Key registry values here
;*********************************************************************************************************
; REGISTRY VALUE NAME DATA TYPE DEFAULT VALUE
;*********************************************************************************************************
Set NewProductShortcutsValueList = {+
{ShortcutFolderName, $(NoTitle), $(!REG_VT_SZ), $(ShortcutFolderName) },+
{AutologShortcutDescription, $(NoTitle), $(!REG_VT_SZ), $(AutologShortcutDescription) },+
{AutologShortcutLocations, $(NoTitle), $(!REG_VT_SZ), $(AutologShortcutLocations) },+
{ControlPanelAppletShortcutDescription, $(NoTitle), $(!REG_VT_SZ), $(ControlPanelAppletShortcutDescription) },+
{ControlPanelAppletShortcutLocations, $(NoTitle), $(!REG_VT_SZ), $(ControlPanelAppletShortcutLocations) },+
; {HelpShortcutDescription, $(NoTitle), $(!REG_VT_SZ), $(HelpShortcutDescription) },+ ; uncomment this line if installing help
; {HelpShortcutLocations, $(NoTitle), $(!REG_VT_SZ), $(HelpShortcutLocations) },+ ; uncomment this line if installing help
{TaskBarAppShortcutDescription, $(NoTitle), $(!REG_VT_SZ), $(TaskBarAppShortcutDescription) },+
{TaskBarAppShortcutLocations, $(NoTitle), $(!REG_VT_SZ), $(TaskBarAppShortcutLocations) },+
{UninstallShortcutDescription, $(NoTitle), $(!REG_VT_SZ), $(UninstallShortcutDescription) },+
{UninstallShortcutLocations, $(NoTitle), $(!REG_VT_SZ), $(UninstallShortcutLocations) }+
}
Debug-Output $(InfName)": Add Registry Values to Product Shortcuts Key."
Set ProductShortcutsKeyParameters = $(hProductShortcutsKey)
Shell $(UtilityInf), AddValueList, $(ProductShortcutsKeyParameters), $(NewProductShortcutsValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(InfName)": Registry error: Add Product Shortcuts Key registry value list"
Shell $(subroutineinf), SetupMessage $(!STF_LANGUAGE) WARNING +
"Could not Add Product Shortcuts Key registry values"
GoTo FatalRegistry
EndIf
CloseRegKey $(hProductShortcutsKey)
;***********************************************************************
;
; Create Run registry entries
;
;***********************************************************************
Debug-Output $(InfName)": Create Run registry entries"
OpenRegKey $(!REG_H_LOCAL) "" $(MicrosoftRunKey) $(!REG_KEY_SET_VALUE) hRunKey
IfStr $(hRunKey) != ""
Debug-Output $(InfName)": Add Run value"
EndIf
;ToDo Add Run Key registry values here
;*********************************************************************************************************
; REGISTRY VALUE NAME DATA TYPE DEFAULT VALUE
;*********************************************************************************************************
Set NewRunValueList = {+
{CnxDslTaskBar, $(NoTitle), $(!REG_VT_SZ), $(CnxDslTaskBar) }+
}
Set NewRunValueList1 = {+
{ADSLNet, $(NoTitle), $(!REG_VT_SZ), $(ADSLNet) }+
}
Debug-Output $(InfName)": Add Registry Values to Microsoft Run Key."
Set RunKeyParameters = $(hRunKey)
Shell $(UtilityInf), AddValueList, $(RunKeyParameters), $(NewRunValueList)
Shell $(UtilityInf), AddValueList, $(RunKeyParameters), $(NewRunValueList1);
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(InfName)": Registry error: Add Microsoft Run Key registry value list"
Shell $(subroutineinf), SetupMessage $(!STF_LANGUAGE) WARNING +
"Could not Add Microsoft Run Key registry values"
GoTo FatalRegistry
EndIf
CloseRegKey $(hRunKey)
;***********************************************************************
;
; Create TCP/IP Parameter entries
;
;***********************************************************************
Debug-Output $(InfName)": Create TCPIP Parameter entries"
OpenRegKey $(!REG_H_LOCAL) "" $(TcpWindowSizeKey) $(!REG_KEY_SET_VALUE) hTcpKey
IfStr $(hTcpKey) != ""
Debug-Output $(InfName)": Add TcpWindowSize value"
EndIf
;ToDo Add TCP/IP Configuration registry values here
;*********************************************************************************************************
; REGISTRY VALUE NAME DATA TYPE DEFAULT VALUE
;*********************************************************************************************************
Set NewTCPIPValueList = {+
{TcpWindowSize, $(NoTitle), $(!REG_VT_DWORD), $(TcpWindowSizeValue) }+
}
Debug-Output $(InfName)": Add Registry Values to TCPIP Parameter Key."
Set TcpParameters = $(hTcpKey)
Shell $(UtilityInf), AddValueList, $(TcpParameters), $(NewTCPIPValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(InfName)": Registry error: Add TCPIP Parameter Key registry value list"
Shell $(subroutineinf), SetupMessage $(!STF_LANGUAGE) WARNING +
"Could not Add TCPIP Parameter Key registry values"
GoTo FatalRegistry
EndIf
CloseRegKey $(hTcpKey)
;***********************************************************************
;
; Create Services Keys and Sub Keys
;
;***********************************************************************
Debug-Output $(InfName)": Create Services Keys"
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services" $(!REG_KEY_WRITE) hServicesKey
ifstr $(hServicesKey) != ""
Debug-Output $(InfName)": Add Cnx service keys."
;
; Create Arbitrator Keys
;
; SYSTEM\CurrentControlSet\Services\CnxTgR
CreateRegKey $(hServicesKey) {$(Arbitrator0DriverName), 0, GenericClass} "" $(!REG_KEY_CREATE_SUB_KEY) "" hCnxTgrDeviceKey
Debug-Output $(InfName)": SYSTEM\CurrentControlSet\Services\CnxTgR"
Debug-Output $(InfName)$(hCnxTgrDeviceKey)
; SYSTEM\CurrentControlSet\Services\CnxTgR\Device
CreateRegKey $(hCnxTgrDeviceKey) {$(DeviceKeyName), 0, GenericClass} "" $(!REG_KEY_CREATE_SUB_KEY) "" hCnxTgrServicesKey
Debug-Output $(InfName)": SYSTEM\CurrentControlSet\Services\CnxTgR\Device"
Debug-Output $(InfName)$(hCnxTgrServicesKey)
; SYSTEM\CurrentControlSet\Services\CnxTgR\Device\CnxTgR0
CreateRegKey $(hCnxTgrServicesKey) {$(Arbitrator0SubKeyName), 0, GenericClass} "" $(!REG_KEY_CREATE_SUB_KEY) "" hCnxTgr0ServicesSubKey
Debug-Output $(InfName)": SYSTEM\CurrentControlSet\Services\CnxTgR\Device\CnxTgR0"
Debug-Output $(InfName)$(hCnxTgr0ServicesSubKey)
; SYSTEM\CurrentControlSet\Services\CnxTgR\Device\CnxTgR1
CreateRegKey $(hCnxTgrServicesKey) {$(Arbitrator1SubKeyName), 0, GenericClass} "" $(!REG_KEY_CREATE_SUB_KEY) "" hCnxTgr1ServicesSubKey
;
; Create Library Keys
;
; SYSTEM\CurrentControlSet\Services\CnxTgS
CreateRegKey $(hServicesKey) {$(LibraryDriverName), 0, GenericClass} "" $(!REG_KEY_CREATE_SUB_KEY) "" hCnxTgsServicesKey
;
; Create Pump Controller Keys
;
; SYSTEM\CurrentControlSet\Services\CnxTgP
CreateRegKey $(hServicesKey) {$(PumpControllerDriverName), 0, GenericClass} "" $(!REG_KEY_CREATE_SUB_KEY) "" hCnxTgpDeviceKey
; SYSTEM\CurrentControlSet\Services\CnxTgS\Device
CreateRegKey $(hCnxTgpDeviceKey) {$(DeviceKeyName), 0, GenericClass} "" $(!REG_KEY_CREATE_SUB_KEY) "" hCnxTgpServicesKey
; SYSTEM\CurrentControlSet\Services\CnxTgR\Device\CnxTgP0
CreateRegKey $(hCnxTgpServicesKey) {$(PumpControllerSubKeyName), 0, GenericClass} "" $(!REG_KEY_CREATE_SUB_KEY) "" hCnxTgpServicesSubKey
endif
CloseRegKey $(hCnxTgsServicesKey)
CloseRegKey $(hCnxTgr0ServicesSubKey)
CloseRegKey $(hCnxTgr1ServicesSubKey)
CloseRegKey $(hCnxTgrDeviceKey)
CloseRegKey $(hCnxTgrServicesKey)
CloseRegKey $(hCnxTgpServicesSubKey)
CloseRegKey $(hCnxTgpServicesKey)
CloseRegKey $(hCnxTgpDeviceKey)
CloseRegKey $(hServicesKey)
;Library Driver
OpenRegKey $(!REG_H_LOCAL) "" $(LibraryServicesKey) $(!REG_KEY_SET_VALUE) hCnxTgsServicesKey
;Arbitrator 0 Driver
OpenRegKey $(!REG_H_LOCAL) "" $(Arbitrator0ServicesKey) $(!REG_KEY_SET_VALUE) hCnxTgrServicesKey
OpenRegKey $(!REG_H_LOCAL) "" $(Arbitrator0ServicesSubKey) $(!REG_KEY_SET_VALUE) hCnxTgr0ServicesSubKey
;Arbitrator 1 Driver
OpenRegKey $(!REG_H_LOCAL) "" $(Arbitrator1ServicesSubKey) $(!REG_KEY_SET_VALUE) hCnxTgr1ServicesSubKey
;Pump Controller Driver
OpenRegKey $(!REG_H_LOCAL) "" $(PumpControllerServicesKey) $(!REG_KEY_SET_VALUE) hCnxTgpServicesKey
OpenRegKey $(!REG_H_LOCAL) "" $(PumpControllerServicesSubKey) $(!REG_KEY_SET_VALUE) hCnxTgpServicesSubKey
;***********************************************************************
;
;ToDo Add services registry entries here
;
;***********************************************************************
;ToDo Add CnxTgR service registry entries here
;*********************************************************************************************************
; REGISTRY VALUE NAME DATA TYPE DEFAULT VALUE
;*********************************************************************************************************
Set NewCnxTgRValueList = {+
{Group, $(NoTitle), $(!REG_VT_SZ), $(ProductTgRGroup) },+
{Start, $(NoTitle), $(!REG_VT_DWORD), $(ProductTgRStart) },+
{Tag, $(NoTitle), $(!REG_VT_DWORD), $(ProductTgRTag) },+
{Type, $(NoTitle), $(!REG_VT_DWORD), $(ProductTgRType) },+
{ErrorControl, $(NoTitle), $(!REG_VT_DWORD), $(ProductTgRErrorControl) }+
}
Debug-Output $(InfName)": Add CnxTgR service."
Set ServicesKeyParameters = $(hCnxTgrServicesKey)
Shell $(UtilityInf), AddValueList, $(ServicesKeyParameters), $(NewCnxTgRValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Outpuut $(InfName)": Registry error: Add CnxTgR service list"
Debug-Output $(InfName)$(hCnxTgrServicesKey)
Shell $(subroutineinf), SetupMessage $(!STF_LANGUAGE) WARNING +
"Could not Add CnxTgR service registry entries"
GoTo FatalRegistry
EndIf
;ToDo Add CnxTgP service registry entries here
;*********************************************************************************************************
; REGISTRY VALUE NAME DATA TYPE DEFAULT VALUE
;*********************************************************************************************************
Set NewCnxTgPValueList = {+
{Group, $(NoTitle), $(!REG_VT_SZ), $(ProductTgPGroup) },+
{Start, $(NoTitle), $(!REG_VT_DWORD), $(ProductTgPStart) },+
{Tag, $(NoTitle), $(!REG_VT_DWORD), $(ProductTgPTag) },+
{Type, $(NoTitle), $(!REG_VT_DWORD), $(ProductTgPType) },+
{ErrorControl, $(NoTitle), $(!REG_VT_DWORD), $(ProductTgPErrorControl) }+
}
Debug-Output $(InfName)": Add CnxTgP service."
Set ServicesKeyParameters = $(hCnxTgpServicesKey)
Shell $(UtilityInf), AddValueList, $(ServicesKeyParameters), $(NewCnxTgPValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(InfName)": Registry error: Add CnxTgP service list"
Shell $(subroutineinf), SetupMessage $(!STF_LANGUAGE) WARNING +
"Could not Add CnxTgP service registry entries"
GoTo FatalRegistry
EndIf
;ToDo Add CnxTgS service registry entries here
;*********************************************************************************************************
; REGISTRY VALUE NAME DATA TYPE DEFAULT VALUE
;*********************************************************************************************************
Set NewCnxTgSValueList = {+
{Group, $(NoTitle), $(!REG_VT_SZ), $(ProductTgSGroup) },+
{Start, $(NoTitle), $(!REG_VT_DWORD), $(ProductTgSStart) },+
{Tag, $(NoTitle), $(!REG_VT_DWORD), $(ProductTgSTag) },+
{Type, $(NoTitle), $(!REG_VT_DWORD), $(ProductTgSType) },+
{ErrorControl, $(NoTitle), $(!REG_VT_DWORD), $(ProductTgSErrorControl)}+
}
Debug-Output $(InfName)": Add CnxTgS service."
Set ServicesKeyParameters = $(hCnxTgsServicesKey)
Shell $(UtilityInf), AddValueList, $(ServicesKeyParameters), $(NewCnxTgSValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(InfName)$(ServicesKeyParameters)
Debug-Output "RegLastError "$(RegLastError)
Debug-Output $(InfName)": Registry error: Add CnxTgS service list"
Shell $(subroutineinf), SetupMessage $(!STF_LANGUAGE) WARNING +
"Could not Add CnxTgS service registry entries"
GoTo FatalRegistry
EndIf
;***********************************************************************
;
;ToDo Add Services Subkey registry entries here
;
;***********************************************************************
;ToDo Add CnxTgR0 Subkey registry entries here
;*********************************************************************************************************
; REGISTRY VALUE NAME DATA TYPE DEFAULT VALUE
;*********************************************************************************************************
Set NewArb0ValueList = {+
{FirmWare, $(NoTitle), $(!REG_VT_SZ), $(ProductFirmWare) },+
{FunctionIdentifier, $(NoTitle), $(!REG_VT_DWORD), $(ProductFunctionIdentifier0) },+
{GpioDirectionMask, $(NoTitle), $(!REG_VT_DWORD), $(ProductGpioDirectionMask) },+
{GpioEdgeMask, $(NoTitle), $(!REG_VT_DWORD), $(ProductGpioEdgeMask) },+
{GpioADSLFunctionMask, $(NoTitle), $(!REG_VT_DWORD), $(ProductGpioADSLFunctionMask) },+
{GpioARMFunctionMask, $(NoTitle), $(!REG_VT_DWORD), $(ProductGpioARMFunctionMask) },+
{HwDebugFlag, $(NoTitle), $(!REG_VT_DWORD), $(ProductHwDebugFlag) },+
{HwId, $(NoTitle), $(!REG_VT_DWORD), $(ProductHwIdArb0) },+
{NumberOfChildren, $(NoTitle), $(!REG_VT_DWORD), $(ProductNumberOfChildren) },+
{PhysicalDriverType, $(NoTitle), $(!REG_VT_DWORD), $(ProductPhysicalDriverType) }+
}
Set Arb0KeyParameters = $(hCnxTgr0ServicesSubKey)
Shell $(UtilityInf), AddValueList, $(Arb0KeyParameters), $(NewArb0ValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(InfName)": Registry error: Add value list"
Shell $(subroutineinf), SetupMessage $(!STF_LANGUAGE) WARNING +
"Could not Add Arbitrator 0 registry entries"
GoTo FatalRegistry
EndIf
;ToDo Add CnxTgR1 Subkey registry entries here
;*********************************************************************************************************
; REGISTRY VALUE NAME DATA TYPE DEFAULT VALUE
;*********************************************************************************************************
Set NewArb1ValueList = {+
{FunctionIdentifier, $(NoTitle), $(!REG_VT_DWORD), $(ProductFunctionIdentifier1) },+
{HwDebugFlag, $(NoTitle), $(!REG_VT_DWORD), $(ProductHwDebugFlag) },+
{HwId, $(NoTitle), $(!REG_VT_DWORD), $(ProductHwIdArb1) },+
{NumberOfChildren, $(NoTitle), $(!REG_VT_DWORD), $(ProductNumberOfChildren) },+
{PhysicalDriverType, $(NoTitle), $(!REG_VT_DWORD), $(ProductPhysicalDriverType) }+
}
Set Arb1KeyParameters = $(hCnxTgr1ServicesSubKey)
Shell $(UtilityInf), AddValueList, $(Arb1KeyParameters), $(NewArb1ValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(InfName)": Registry error: Add value list"
Debug-Output $(InfName)$(hCnxTgr1ServicesSubKey)
Shell $(subroutineinf), SetupMessage $(!STF_LANGUAGE) WARNING +
"Could not Add Arbitrator 1 registry entries"
GoTo FatalRegistry
EndIf
;ToDo Add CnxTgP0 Subkey registry entries here
;*********************************************************************************************************
; REGISTRY VALUE NAME DATA TYPE DEFAULT VALUE
;*********************************************************************************************************
Set NewPumpControllerValueList = {+
{AdslHeadEnd, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslHeadEnd) },+
{AdslHeadEndEnvironment, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslHeadEndEnvironment)},+
{AdslTelcoId, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslTelcoId)},+
{AdslOption1, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption1)},+
{AdslOption2, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption2)},+
{AdslOption3, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption3)},+
{AdslOption4, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption4)},+
{AdslOption5, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption5)},+
{AdslOption6, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption6)},+
{AdslOption7, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption7)},+
{AdslOption8, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption8)},+
{AdslOption9, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption9)},+
{AdslOption10, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption10)},+
{AdslOption11, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption11)},+
{AdslOption12, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption12)},+
{AdslOption13, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption13)},+
{AdslOption14, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption14)},+
{AdslOption15, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption15)},+
{AdslOption16, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption16)},+
{AdslOption17, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption17)},+
{AdslOption18, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption18)},+
{AdslOption19, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption19)},+
{AdslOption20, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption20)},+
{AutoSenseInitialTimeout, $(NoTitle), $(!REG_VT_DWORD), $(ProductAutoSenseInitialTimeout)},+
{AdslCRCIncrementFar, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslCRCIncrementFar)},+
{AdslCRCRetrainThresholdFar, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslCRCRetrainThresholdFar)},+
{AdslCRCThresholdFar, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslCRCThresholdFar)},+
{AdslCRCThresholdNear, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslCRCThresholdNear)},+
{AdslSESRetrainThresholdNear, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslSESRetrainThresholdNear)},+
{AdslSNRMarRetrainThresholdNear, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslSNRMarRetrainThresholdNear)},+
{AdslSNRMarThresholdNear, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslSNRMarThresholdNear)},+
{AutoSenseHandshakeMode, $(NoTitle), $(!REG_VT_DWORD), $(ProductASHandshakeMode) },+
{AutoSenseWiringMode, $(NoTitle), $(!REG_VT_DWORD), $(ProductASWiringMode) },+
{AutoSenseWiringSelection, $(NoTitle), $(!REG_VT_DWORD), $(ProductASWiringSelection) },+
{AutoSenseWiringComboGPIO, $(NoTitle), $(!REG_VT_BIN), $(ProductASWiringComboGPIO) },+
{AutoSenseWiringRelayDelay, $(NoTitle), $(!REG_VT_DWORD), $(ProductASWiringRelayDelay) },+
{AutoSenseWiringRelayEnergized, $(NoTitle), $(!REG_VT_DWORD), $(ProductASWiringRelayEnergized)},+
{AutoSenseWiringOrder, $(NoTitle), $(!REG_VT_BIN), $(ProductASWiringOrder) },+
{FunctionIdentifier, $(NoTitle), $(!REG_VT_DWORD), $(ProductFunctionIdentifier3) },+
{HwDebugFlag, $(NoTitle), $(!REG_VT_DWORD), $(ProductHwDebugFlag) },+
{PhysicalDriverType, $(NoTitle), $(!REG_VT_DWORD), $(ProductPhysicalDriverType) }+
}
Set PumpControllerKeyParameters = $(hCnxTgpServicesSubKey)
Shell $(UtilityInf), AddValueList, $(PumpControllerKeyParameters), $(NewPumpControllerValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(InfName)": Registry error: Add value list"
Shell $(subroutineinf), SetupMessage $(!STF_LANGUAGE) WARNING +
"Could not Add Data Pump Controller registry entries"
GoTo FatalRegistry
EndIf
IfInt $(LED_RELAY_ENABLE) == $(LED_HW)
; LED Option Parameters
Set LedRelayValueList = {+
{AutoSenseWiringNumCombos, $(NoTitle), $(!REG_VT_DWORD), $(ProductLedASWiringNumCombos) },+
{LinkStatusLedEnable, $(NoTitle), $(!REG_VT_DWORD), $(ProductLedLinkStatusEnable) },+
{DataTrafficLedEnable, $(NoTitle), $(!REG_VT_DWORD), $(ProductLedDataTrafficEnable) }+
}
Else
; Relay Option Parameters
Set LedRelayValueList = {+
{AutoSenseWiringNumCombos, $(NoTitle), $(!REG_VT_DWORD), $(ProductRelayASWiringNumCombos)},+
{LinkStatusLedEnable, $(NoTitle), $(!REG_VT_DWORD), $(ProductRelayLinkStatusEnable) },+
{DataTrafficLedEnable, $(NoTitle), $(!REG_VT_DWORD), $(ProductRelayDataTrafficEnable)}+
}
EndIf
Set PumpControllerKeyParameters = $(hCnxTgpServicesSubKey)
Shell $(UtilityInf), AddValueList, $(PumpControllerKeyParameters), $(LedRelayValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(InfName)": Registry error: Add value list"
Shell $(subroutineinf), SetupMessage $(!STF_LANGUAGE) WARNING +
"Could not Add LED/Relay registry entries"
GoTo FatalRegistry
EndIf
CloseRegKey $(hCnxTgsServicesKey)
CloseRegKey $(hCnxTgr0ServicesSubKey)
CloseRegKey $(hCnxTgr1ServicesSubKey)
CloseRegKey $(hCnxTgrServicesKey)
CloseRegKey $(hCnxTgpServicesSubKey)
CloseRegKey $(hCnxTgpServicesKey)
; Add CnxTgN Software Component
Debug-Output $(InfName)": AddSoftwareComponent CnxTgN."
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernelautostart", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error"
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
Set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output $(InfName)": Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
GoTo FatalRegistry
EndIf
Debug-Output $(InfName)": 483 Set NewValueList"
Set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output $(InfName)": Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
GoTo FatalRegistry
EndIf
Debug-Output $(InfName)": 505 Set NewValueList"
Set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output $(InfName)": Registry error: add value list."
GoTo FatalRegistry
EndIf
EndIf
Debug-Output $(InfName)": 527 AddHardwareComponent"
Debug-Output $(InfName)$(ProductKeyName)
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
IfInt $($R4) != -1
Debug-Output $(InfName)": 984 Set OEM_ABANDON_OPTIONS"
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
EndIf
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": Cannot add hardware component"
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output $(InfName)": Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
GoTo FatalRegistry
EndIf
Debug-Output $(InfName)": 546 Set NewValueList"
Set KeyParameters = $($R3)
Set KeyAdapterRules = $($R2)
Set AdapterNumber = $($R4)
Set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error"
GoTo ShellCodeError
EndIf
CloseRegKey $($R1)
Debug-Output $(InfName)": 563 Add Value List"
Set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
Set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
Set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output $(InfName)": Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
GoTo FatalRegistry
EndIf
CloseRegKey $(KeyAdapterRules)
;*************************************************************************
;
;*************************************************************************
WriteParameters = +
;(THD)
Debug-Output $(InfName)": 592 Write Parameters"
IfStr $(AdapterNumber) != ""
; Use the following for 1 TAPI line
Set TapiAddressList = {$(AdapterNumber)" 0 0"}
Set TapiCnxtAddressList = $(AdapterNumber)" 0 0"
EndIf
;ToDo Add ADSL registry entries here
;*********************************************************************************************************
; REGISTRY VALUE NAME DATA TYPE DEFAULT VALUE
;*********************************************************************************************************
Set NewValueList = {+
{AddressList, $(NoTitle), $(!REG_VT_SZ), $(TapiCnxtAddressList) },+
{AdslHeadEnd, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslHeadEnd) },+
{AdslHeadEndEnvironment, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslHeadEndEnvironment)},+
{AdslTelcoId, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslTelcoId) },+
{AdslOption1, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption1)},+
{AdslOption2, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption2)},+
{AdslOption3, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption3)},+
{AdslOption4, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption4)},+
{AdslOption5, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption5)},+
{AdslOption6, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption6)},+
{AdslOption7, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption7)},+
{AdslOption8, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption8)},+
{AdslOption9, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption9)},+
{AdslOption10, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption10)},+
{AdslOption11, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption11)},+
{AdslOption12, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption12)},+
{AdslOption13, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption13)},+
{AdslOption14, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption14)},+
{AdslOption15, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption15)},+
{AdslOption16, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption16)},+
{AdslOption17, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption17)},+
{AdslOption18, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption18)},+
{AdslOption19, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption19)},+
{AdslOption20, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdslOption20)},+
{AdvancedKeys, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdvancedKeys) },+
{AdvancedMode, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdvancedMode) },+
{AdvancedTabs, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdvancedTabs) },+
{AdvancedTabsA, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdvancedTabsA) },+
{AdvancedTabsC, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdvancedTabsC) },+
{AdvancedTabsE, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdvancedTabsE) },+
{AdvancedTabsP, $(NoTitle), $(!REG_VT_DWORD), $(ProductAdvancedTabsP) },+
{AutoSenseHandshakeMode, $(NoTitle), $(!REG_VT_DWORD), $(ProductASHandshakeMode) },+
{AutoSenseWiringMode, $(NoTitle), $(!REG_VT_DWORD), $(ProductASWiringMode) },+
{AutoSenseWiringSelection, $(NoTitle), $(!REG_VT_DWORD), $(ProductASWiringSelection) },+
{AutoSenseWiringComboGPIO, $(NoTitle), $(!REG_VT_BIN), $(ProductASWiringComboGPIO) },+
{AutoSenseWiringRelayDelay, $(NoTitle), $(!REG_VT_DWORD), $(ProductASWiringRelayDelay) },+
{AutoSenseWiringRelayEnergized, $(NoTitle), $(!REG_VT_DWORD), $(ProductASWiringRelayEnergized)},+
{AutoSenseWiringOrder, $(NoTitle), $(!REG_VT_DWORD), $(ProductASWiringOrder) },+
{BoardName, $(NoTitle), $(!REG_VT_SZ), $(ProductHardwareTitle) },+
{DebugFlag, $(NoTitle), $(!REG_VT_DWORD), $(ProductDebugFlag) },+
{DeviceName, $(NoTitle), $(!REG_VT_SZ), $(ProductHardwareTitle) },+
{DisplayExtPhysLayerStats, $(NoTitle), $(!REG_VT_DWORD), $(ProductDisplayExtPhysLayerStats) },+
{DriverDesc, $(NoTitle), $(!REG_VT_SZ), $(ProductHardwareTitle) },+
{HwId, $(NoTitle), $(!REG_VT_DWORD), $(ProductHwIdDSL) },+
{MaxTransmit, $(NoTitle), $(!REG_VT_DWORD), $(ProductMaxTransmit) },+
{OAMFaultManagementControl, $(NoTitle), $(!REG_VT_SZ), $(ProductOAMFaultManagementControl) },+
{PciVendorId, $(NoTitle), $(!REG_VT_SZ), $(ProductPciVendorId) },+
{PciDeviceId, $(NoTitle), $(!REG_VT_SZ), $(ProductPciDeviceId) },+
{PersistentAutodialEnableOnInstall, $(NoTitle), $(!REG_VT_SZ), $(ProductPersistentAutodialEnableOnInstall) },+
{RFCEncapsulationMode, $(NoTitle), $(!REG_VT_DWORD), $(ProductEncapsulationMode) },+
{RxMaxFrameSize, $(NoTitle), $(!REG_VT_DWORD), $(ProductRxMaxFrameSize) },+
{RxBufAllocLimit, $(NoTitle), $(!REG_VT_DWORD), $(ProductRxBufAllocLimit) },+
{SoundKeyName, $(NoTitle), $(!REG_VT_SZ), $(ProductSoundKeyName) },+
{TxMaxFrameSize, $(NoTite), $(!REG_VT_DWORD), $(ProductTxMaxFrameSize) },+
{VcDisconnectDelay, $(NoTitle), $(!REG_VT_DWORD), $(ProductVcDisconnectDelay) },+
{VcList, $(NoTitle), $(!REG_VT_SZ), $(ProductVcList) },+
{VendorDescription, $(NoTitle), $(!REG_VT_SZ), $(ProductVendorDescription) },+
{VendorId, $(NoTitle), $(!REG_VT_SZ), $(ProductVendorId) },+
{VendorNearId, $(NoTitle), $(!REG_VT_SZ), $(ProductNearVendorId) },+
{WanAddress, $(NoTitle), $(!REG_VT_SZ), $(ProductWanAddress) }+
}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
Debug-Output $(InfName)" AddValueList"
Debug-Output $(InfName)$(KeyParameters)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
CloseRegKey $(KeyParameters)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(KeyParameters)
Debug-Output $(InfName)": Registry error: Add value list"
GoTo FatalRegistry
EndIf
IfInt $(LED_RELAY_ENABLE) == $(LED_HW)
; LED Option Parameters
Set LedRelayValueList = {+
{AutoSenseWiringNumCombos, $(NoTitle), $(!REG_VT_DWORD), $(ProductLedASWiringNumCombos) },+
{LinkStatusLedEnable, $(NoTitle), $(!REG_VT_DWORD), $(ProductLedLinkStatusEnable) },+
{DataTrafficLedEnable, $(NoTitle), $(!REG_VT_DWORD), $(ProductLedDataTrafficEnable) }+
}
Else
; Relay Option Parameters
Set LedRelayValueList = {+
{AutoSenseWiringNumCombos, $(NoTitle), $(!REG_VT_DWORD), $(ProductRelayASWiringNumCombos)},+
{LinkStatusLedEnable, $(NoTitle), $(!REG_VT_DWORD), $(ProductRelayLinkStatusEnable) },+
{DataTrafficLedEnable, $(NoTitle), $(!REG_VT_DWORD), $(ProductRelayDataTrafficEnable)}+
}
EndIf
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(LedRelayValueList)
CloseRegKey $(KeyParameters)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(InfName)": Registry error: Add value list"
Shell $(subroutineinf), SetupMessage $(!STF_LANGUAGE) WARNING +
"Could not Add LED/Relay registry entries"
GoTo FatalRegistry
EndIf
;
; Skip TAPI/RAS setup if already installed.
;
IfStr(i) $(!NTN_InstallMode) == configure
Debug-Output $(InfName)": 669 NTN_InstallMode == configure"
GoTo SuccessfulOption
EndIf
;
; Create the HARDWARE\DEVICEMAP\TAPI DEVICES\Conexant PCI ADSL WAN Driver key
;
Debug-Output $(InfName)": 675 HARDWARE\DEVICEMAP\TAPI DEVICES\Conexant PCI ADSL WAN Driver key"
OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP" $(MAXIMUM_ALLOWED) BaseKey
shell "" HtCreateRegKey $(BaseKey) "TAPI DEVICES\"$(ProductHardwareName)
IfStr(i) $($R0) != NO_ERROR
Debug-Output $(InfName)": Error creating registry key!"
GoTo FatalRegistry
EndIf
Set TapiDeviceKey = $($R1)
Set NewValueList = {+
{Address,$(NoTitle),$(!REG_VT_MULTI_SZ),$(TapiAddressList)},+
{"Media Type",$(NoTitle),$(!REG_VT_SZ),$(TapiMediaType)}}
Shell $(UtilityInf), AddValueList, $(TapiDeviceKey), $(NewValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error."
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output $(InfName)": Registry error: Add value list"
GoTo FatalRegistry
EndIf
CloseRegKey $(TapiDeviceKey)
CloseRegKey $(BaseKey)
;
; if RAS is not installed, then shell ras setup INF file to install RAS
; else invoke RAS to allow user to configure RAS for the Conexant PCI ADSL WAN Driver.
;
Read-Syms InvokeRasDlg$(!STF_LANGUAGE)
Shell "oemnsvra.inf" CheckRasInstalled
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": Error Shelling the RAS INF file oemnsvra.inf"
Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), +
"STATUS", $(InvokeRasError)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
GoTo ShellCodeError
EndIf
GoTo SuccessfulOption
EndIf
Set RasInstalled = $($R0)
Debug-Output $(InfName)": Is RAS Installed? "$(RasInstalled)
;
; display a message to the user that RAS setup will now be invoked
;
IfStr(i) $(RasInstalled) == FALSE
Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", +
$(InvokeRasSetupMsg)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
GoTo SuccessfulOption
EndIf
Else
Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", +
$(InvokeRasConfigMsg)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
GoTo SuccessfulOption
EndIf
EndIf
;
; FIXME - RAS INF will not locate the files if it is spawned here.
;
EndWait
GoTo SuccessfulOption
;
; Set the flags based on whether this is an IDW installation
;
IfStr(i) $(!STF_IDW) == TRUE
Set AddCopy = NO
Set DoCopy = NO
Set DoConfig = NO
Else
Set AddCopy = YES
Set DoCopy = YES
Set DoConfig = YES
EndIf
;
; change the global install mode flag to configure if RAS is already installed
;
IfStr(i) $(RasInstalled) == TRUE
Set SaveNTN_InstallMode = $(!NTN_InstallMode)
Set !NTN_InstallMode = configure
EndIf
;
; now invoke RAS setup to do the right thing
;
Shell "oemnsvra.inf" InstallOption $(!STF_LANGUAGE) "RAS" $(RasDir) $(AddCopy) $(DoCopy) $(DoConfig)
;
; restore the global instal mode flag if it was changed
;
IfStr(i) $(RasInstalled) == TRUE
Set !NTN_InstallMode = $(SaveNTN_InstallMode)
EndIf
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": Error Shelling the RAS INF file oemnsvra.inf"
Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", +
$(InvokeRasError)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
GoTo ShellCodeError
EndIf
GoTo SuccessfulOption
EndIf
EndWait
GoTo SuccessfulOption
;***********************************************************************
;
;***********************************************************************
BindingAdapter =+
Set Error = "Binding: Sorry, not yet implemented."
GoTo FatalError
;***********************************************************************
;
;***********************************************************************
RemoveAdapter = +
IfStr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error"
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
GoTo FatalRegistry
EndIf
Else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error"
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
GoTo FatalRegistry
EndIf
EndIf
; RemoveService Parameters
; SvcName = $($0)
; UseDelSvc = $($1)
Debug-Output $(InfName)": RemoveService LibraryDriverName"
Shell $(UtilityInf), RemoveService, $(LibraryDriverName), "YES"
Debug-Output $(InfName)": RemoveService Arbitrator0DriverName"
Shell $(UtilityInf), RemoveService, $(Arbitrator0DriverName), "YES"
Debug-Output $(InfName)": RemoveService Arbitrator1DriverName"
Shell $(UtilityInf), RemoveService, $(Arbitrator1DriverName), "YES"
Debug-Output $(InfName)": RemoveService PumpControllerDriverName"
Shell $(UtilityInf), RemoveService, $(PumpControllerDriverName), "YES"
;
; Delete the Company Product Software Key used by Applications
;
OpenRegKey $(!REG_H_LOCAL) "" $(CompanySoftwareKey) $(!REG_KEY_SET_VALUE) hCompanyKey
DeleteRegTree $(hCompanyKey) $(ProductSoftwareSubkey)
CloseRegKey $(hCompanyKey)
;
; Delete the Run entry for the DSL Taskbar Application
;
OpenRegKey $(!REG_H_LOCAL) "" $(MicrosoftRunKey) $(!REG_KEY_SET_VALUE) hRunKey
Ifstr(i) $(hRunKey) == $(KeyNull)
Debug-Output $(InfName)": Cannot open Microsoft Run Key"
Endif
DeleteRegValue $(hRunKey) "CnxDslTaskBar"
Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS)
Debug-Output $(InfName)": Cannot delete Taskbar Application Run Value"
Endif
CloseRegKey $(hRunKey)
; AddFileToDeleteList
;
; WARNING!!!
; Do NOT use AddFileToDeleteList if you want to be able to reinstall without rebooting
; If you reinstall without rebooting, the files marked for deletion will still be deleted
; on the next reboot.
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\drivers\CnxTgN.sys"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\drivers\CnxTgR.sys"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\drivers\CnxTgP.sys"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\drivers\CnxTgS.sys"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\drivers\CnxTgF.hex"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\CnxAdslC.cpl"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\CnxDslWz.dll"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\CnxHwIo.dll"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\CnxAdslL.exe"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\CnxDslTb.exe"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\CnxUnist.exe"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\"$(ConnectoidShortcutIconFile)
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\logo.bmp"
AddFiletoDeleteList $(!STF_WINDOWSPATH)"\Media\CnxDown.wav"
AddFiletoDeleteList $(!STF_WINDOWSPATH)"\Media\CnxUp.wav"
AddFiletoDeleteList $(!STF_WINDOWSPATH)"\Help\CnxAdslH.chm"
GoTo end
;***********************************************************************
;
;***********************************************************************
UpgradeSoftware = +
IfStr(i) $(ProductKeyName) == $(!NTN_RegBase)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
IfStr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
Set Version = *($(VersionInfo), 4)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error"
GoTo ShellCodeError
EndIf
Set !UG_Filename = $($R0)
IfStr(i) $(!UG_Filename) != ""
install "Install-Update"
IfStr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
GoTo FatalError
EndIf
EndIf
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
IfInt $(Version) != $(ProductVersion)
EndIf
CloseRegKey $(KeyProduct)
Else
GoTo FatalRegistry
EndIf
Else
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
$(MAXIMUM_ALLOWED) NetworkCardKey
IfStr(i) $(NetworkCardKey) != $(KeyNull)
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
Set ServiceName = *($(ServiceNameInfo), 4)
OpenRegKey $(NetworkCardKey) "" "NetRules" +
$(MAXIMUM_ALLOWED) NetRuleKey
IfStr(i) $(NetRuleKey) != $(KeyNull)
Else
GoTo FatalRegistry
EndIf
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
Else
GoTo FatalRegistry
EndIf
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
IfStr(i) $(ServiceKey) != $(KeyNull)
CloseRegKey $(ServiceKey)
Else
GoTo FatalRegistry
EndIf
EndIf
GoTo end
;***********************************************************************
;
;***********************************************************************
SuccessfulOption = +
GoTo end
;***********************************************************************
;
;***********************************************************************
Abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error"
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
GoTo FatalRegistry
EndIf
EndForListDo
IfStr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error"
GoTo ShellCodeError
EndIf
Set RegistryErrorIndex = $($R0)
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
GoTo FatalRegistry
EndIf
EndIf
; RemoveService Parameters
; SvcName = $($0)
; UseDelSvc = $($1)
Debug-Output $(InfName)": RemoveService LibraryDriverName"
Shell $(UtilityInf), RemoveService, $(LibraryDriverName), "YES"
Debug-Output $(InfName)": RemoveService Arbitrator0DriverName"
Shell $(UtilityInf), RemoveService, $(Arbitrator0DriverName), "YES"
Debug-Output $(InfName)": RemoveService Arbitrator1DriverName"
Shell $(UtilityInf), RemoveService, $(Arbitrator1DriverName), "YES"
Debug-Output $(InfName)": RemoveService PumpControllerDriverName"
Shell $(UtilityInf), RemoveService, $(PumpControllerDriverName), "YES"
;
; Delete the Company Product Software Key used by Applications
;
OpenRegKey $(!REG_H_LOCAL) "" $(CompanySoftwareKey) $(!REG_KEY_SET_VALUE) hCompanyKey
DeleteRegTree $(hCompanyKey) $(ProductSoftwareSubkey)
CloseRegKey $(hCompanyKey)
;
; Delete the Run entry for the DSL Taskbar Application
;
OpenRegKey $(!REG_H_LOCAL) "" $(MicrosoftRunKey) $(!REG_KEY_SET_VALUE) hRunKey
Ifstr(i) $(hRunKey) == $(KeyNull)
Debug-Output $(InfName)": Cannot open Microsoft Run Key"
Endif
DeleteRegValue $(hRunKey) "CnxDslTaskBar"
Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS)
Debug-Output $(InfName)": Cannot delete Taskbar Application Run Value"
Endif
CloseRegKey $(hRunKey)
; AddFileToDeleteList
;
; WARNING!!!
; Do NOT use AddFileToDeleteList if you want to be able to reinstall without rebooting
; If you reinstall without rebooting, the files marked for deletion will still be deleted
; on the next reboot.
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\drivers\CnxTgN.sys"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\drivers\CnxTgR.sys"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\drivers\CnxTgP.sys"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\drivers\CnxTgS.sys"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\drivers\CnxTgF.hex"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\CnxAdslC.cpl"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\CnxDslWz.dll"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\CnxHwIo.dll"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\CnxAdslL.exe"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\CnxDslTb.exe"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\CnxUnist.exe"
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\"$(ConnectoidShortcutIconFile)
AddFiletoDeleteList $(!STF_WINDOWSSYSPATH)"\logo.bmp"
AddFiletoDeleteList $(!STF_WINDOWSPATH)"\Media\CnxDown.wav"
AddFiletoDeleteList $(!STF_WINDOWSPATH)"\Media\CnxUp.wav"
AddFiletoDeleteList $(!STF_WINDOWSPATH)"\Help\CnxAdslH.chm"
GoTo end
;***********************************************************************
;
;***********************************************************************
WarningMsg = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
GoTo ShellCodeError
EndIf
IfStr(i) $($R1) == "OK"
GoTo $(to)
Else-IfStr(i) $($R1) == "CANCEL"
GoTo $(from)
EndIf
GoTo end
;***********************************************************************
;
;***********************************************************************
NonFatalInfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
IfStr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
GoTo ShellCodeError
EndIf
Set Error = $($R0)
EndIf
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
GoTo ShellCodeError
EndIf
IfStr(i) $($R1) == "OK"
GoTo $(from)
EndIf
GoTo end
;***********************************************************************
;
;***********************************************************************
FatalRegistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
GoTo ShellCodeError
EndIf
Set Error = $($R0)
GoTo FatalError
;***********************************************************************
;
;***********************************************************************
FatalDetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(InfName)": ShellCode error: cannot get an error string."
GoTo ShellCodeError
EndIf
Set Error = $($R0)
GoTo FatalError
;***********************************************************************
;
;***********************************************************************
FatalError = +
IfStr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
GoTo ShellCodeError
EndIf
Set Error = $($R0)
EndIf
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
GoTo ShellCodeError
EndIf
GoTo SetFailed
;***********************************************************************
;
;***********************************************************************
ShellCodeError = +
Set DlgType = "MessageBox"
Set STF_MB_TITLE = $(ShellCodeErrorTitle)
Set STF_MB_TEXT = $(ShellCodeErrorText)
Set STF_MB_TYPE = 1
Set STF_MB_ICON = 3
Set STF_MB_DEF = 1
UI Start "Error Message"
GoTo SetFailed
;***********************************************************************
;
;***********************************************************************
SetFailed = +
Set CommonStatus = STATUS_FAILED
IfStr(i) $(OEM_ABANDON_ON) == TRUE
Set OEM_ABANDON_ON = FALSE
GoTo Abandon
EndIf
GoTo end
;***********************************************************************
;
;***********************************************************************
end = +
Set !DebugOutputControl = $(OldDebugControl)
Return $(CommonStatus)
;***********************************************************************
;
;***********************************************************************
[HtCreateRegKey]
Debug-Output $(InfName)": Entering [HtCreateRegKey]"
Set ECR_Result = NO_ERROR
Set ECR_BaseKeyHandle = $($0)
Set ECR_NewPath = $($1)
Set KeyNull = ""
Set MAXIMUM_ALLOWED = 33554432
Debug-Output $(InfName)": HtCreateRegKey - ECR_BaseKeyHandle = "$(ECR_BaseKeyHandle)
Debug-Output $(InfName)": ECR_NewPath = "$(ECR_NewPath)
Debug-Output $(InfName)": MAXIMUM_ALLOWED = "$(MAXIMUM_ALLOWED)
Debug-Output $(InfName)": KeyNull = "$(KeyNull)
OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_NewPath) $(MAXIMUM_ALLOWED) +
ECR_BaseKey
Debug-Output $(InfName)": ECR_BaseKey = "$(ECR_BaseKey)
Debug-Output $(InfName)": OpenRegKey returned "$($R0)
IfStr $(ECR_BaseKey) == $(KeyNull)
Debug-Output $(InfName)": ECR_BaseKey == KeyNull"
Else
Debug-Output $(InfName)": ECR_BaseKey != KeyNull"
Set ECR_KeyHandle = $(ECR_BaseKey)
GoTo ECR_Return
EndIf
Set ECR_TmpPath = ""
Split-String $(ECR_NewPath) "\" ECR_PList
Debug-Output $(InfName)": ECR_PList = "$(ECR_PList)
ForListDo $(ECR_PList)
IfStr(i) $($) != "\"
IfInt $(#) == 1
Set ECR_TmpPath = $($)
Else
Set ECR_TmpPath = $(ECR_TmpPath)"\"$($)
EndIf
Debug-Output $(InfName)": Determining if "$(ECR_TmpPath)" exists"
OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_TmpPath) $(MAXIMUM_ALLOWED) ECR_BaseKey
IfStr $(ECR_BaseKey) == $(KeyNull)
Debug-Output $(InfName)": Creating "$(ECR_TmpPath)
CreateRegKey $(ECR_BaseKeyHandle) {$(ECR_TmpPath),0,GenericClass} "" $(MAXIMUM_ALLOWED) "" ECR_KeyHandle
IfStr(i) $(ECR_KeyHandle) == $(KeyNull)
Set ECR_Result = $($R0)
GoTo ECR_Return
EndIf
EndIf
EndIf
EndForListDo
ECR_Return = +
Return $(ECR_Result) $(ECR_KeyHandle)
;***********************************************************************
;
;***********************************************************************
[DebugConfiguration]
Return
;***********************************************************************
;
;***********************************************************************
[Install-Option]
Set STF_VITAL = ""
IfStr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-$(Option) $(SourceDirectory) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Cpl $(SourceDirectory) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-DLL $(SourceDirectory) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Exe $(SourceDirectory) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Ico $(SourceDirectory) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Bmp $(SourceDirectory) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Wav $(SourceDirectory) $(!STF_WINDOWSPATH)\Media
AddSectionFilesToCopyList Files-Chm $(SourceDirectory) $(!STF_WINDOWSPATH)\Help
EndIf
IfStr(i) $(DoCopy) == "YES"
Set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
EndIf
Exit
;***********************************************************************
;
;***********************************************************************
[Install-Update]
Set STF_VITAL = ""
Set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-$(Option) $(SourceDirectory) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SourceDirectory) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Cpl $(SourceDirectory) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-DLL $(SourceDirectory) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Exe $(SourceDirectory) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Ico $(SourceDirectory) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Bmp $(SourceDirectory) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Wav $(SourceDirectory) $(!STF_WINDOWSPATH)\Media
AddSectionFilesToCopyList Files-Chm $(SourceDirectory) $(!STF_WINDOWSPATH)\Help
Set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
;***********************************************************************
;
;***********************************************************************
[Source Media Descriptions]
1 = $(DiskName) , TAGFILE = DISK1
;***********************************************************************
;
;***********************************************************************
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
;ToDo Add files to be copied here.
;
;ARG1: An integer ID that identifies the distribution disk on which the
; source file is located.
;ARG2: Specifies the base file name and extension (must be 8.3 FAT format)
; of the source file
;ARG3: SIZE = size of file and is used to update progress indicator.
;***********************************************************************
;
;***********************************************************************
[Files-Inf]
1, oemsetnt.inf, SIZE=72000, RENAME=$(!UG_Filename)
;***********************************************************************
;
;***********************************************************************
[Files-Conexant_PCI_ADSL_WAN_Driver]
1, CnxTgN.sys, SIZE=128000
1, CnxTgP.sys, SIZE=501000
1, CnxTgR.sys, SIZE=59000
1, CnxTgS.sys, SIZE=8000
1, CnxTgf.hex, SIZE=42000
; WARNING!!! Be sure to update AddFiletoDeleteList entries when adding files
;***********************************************************************
;
;***********************************************************************
[Files-Cpl]
1, CnxAdslC.CPL, SIZE=596000
; WARNING!!! Be sure to update AddFiletoDeleteList entries when adding files
;***********************************************************************
;
;***********************************************************************
[Files-Exe]
1, CnxAdslL.exe, SIZE=180000
1, CnxDslTb.exe, SIZE=332000
1, CnxUnist.exe, SIZE=136000
1, dslnet.exe, SIZE=130000 ;
1, UnADSL.exe SIZE=108000 ;
; WARNING!!! Be sure to update AddFiletoDeleteList entries when adding files
;***********************************************************************
;
;***********************************************************************
[Files-DLL]
1, CnxDslWz.dll, SIZE=292000
1, CnxHwIo.dll, SIZE=112000
1, mfc42d.dll, SIZE=908000 ;
1, mfco42d.dll, SIZE=780000 ;
1, msvcrtd.dll, SIZE=380000 ;
1, CnxSerom.ini, SIZE=1000 ;
1, Cnx.ico, SIZE=1000 ;
1, dslnet.dat, SIZE=1000 ;
1, Wizard.ico, SIZE=1000 ;
; WARNING!!! Be sure to update AddFiletoDeleteList entries when adding files
;***********************************************************************
;
;***********************************************************************
[Files-Ico]
1, CnxDunI.ico, SIZE=3000
; WARNING!!! Be sure to update AddFiletoDeleteList entries when adding files
;***********************************************************************
;
;***********************************************************************
[Files-Wav]
; 1, CnxDown.wav, SIZE=79000 ; uncomment this line if using a custom down wave
; 1, CnxUp.wav, SIZE=79000 ; uncomment this line if using a custom up wave
; WARNING!!! Be sure to update AddFiletoDeleteList entries when adding files
;***********************************************************************
;
;***********************************************************************
[Files-Chm]
; 1, CnxAdslH.chm, SIZE=201000 ; uncomment this line if installing help
; WARNING!!! Be sure to update AddFiletoDeleteList entries when adding files
;***********************************************************************
;
;***********************************************************************
[Files-Bmp]
; 1, logo.bmp, SIZE=1000 ; uncomment this line if using a custom logo
; WARNING!!! Be sure to update AddFiletoDeleteList entries when adding files
;***********************************************************************
;
;***********************************************************************
[LanguagesSupported]
ENG
;***********************************************************************
;
;***********************************************************************
[OptionsTextENG]
; The first argument is what will show up in the Select OEM Option dialog
; box when installing new hardware.
"World-Net PCI ADSL WAN" = "I-PASS World-Net PCI ADSL WAN Adapter"
;***********************************************************************
;
;***********************************************************************
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = "I-PASS World-Net PCI ADSL WAN Adapter Card Setup"
ProductSoftwareDescription = "I-PASS World-Net PCI ADSL WAN Adapter Driver"
; This description is displayed in the "Item Notes" field in the Adapters properties dialog box
ProductHardwareDescription = "I-PASS World-Net PCI ADSL WAN Adapter Miniport Driver"
ProductSoftwareTitle = "I-PASS World-Net PCI ADSL WAN Adapter Driver"
; This description is displayed in the "Network Adapters" field in the Adapters properties dialog box
ProductHardwareTitle = "I-PASS World-Net PCI ADSL WAN Adapter"
ShellCodeErrorTitle = "Error: "$(FunctionTitle))
ShellCodeErrorText = "Shell Code Error."
NoHardwareFound = "The PCI ADSL adapter is not present in the system"
; Applications Display
ShortProductName = "I-PASS World-Net ADSL"
ProductName = "I-PASS World-Net PCI ADSL WAN Adapter"
CompanyName = "World-Net Technology"
TaskbarAppTitle = "Conexant AccessRunner ADSL"
CustomerVersion = ""
; Dial-Up Networking Connectoid
ConnectoidName = "AccessRunner DSL"
; Shortcuts
ConnectoidShortcutDescription = "AccessRunner DSL"
ShortcutFolderName = "AccessRunner DSL"
ConnectoidShortcutIconFile = "CnxDunI.ico"
AutologShortcutDescription= "AccessRunner DSL Autolog"
ControlPanelAppletShortcutDescription = "AccessRunner Control Panel"
HelpShortcutDescription = "AccessRunner Help"
TaskBarAppShortcutDescription = "AccessRunner Task Bar"
UninstallShortcutDescription = "Uninstall AccessRunner DSL"
;***********************************************************************
;
;***********************************************************************
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
;***********************************************************************
;
;***********************************************************************
[InvokeRasDlgENG]
InvokeRasSetupMsg = "The PCI ADSL WAN Adapter setup is complete. "+
"REMOTE ACCESS SERVICES (RAS) must now be installed. "+
"Please ADD the PCI ADSL WAN Adapter ports in RAS "+
"setup (in the SERVICES tab) to enable you to "+
"use RAS over the PCI ADSL WAN Adapter."
InvokeRasConfigMsg = "The PCI ADSL WAN Adapter setup is complete. "+
"REMOTE ACCESS SERVICES (RAS) setup must now be invoked. "+
"Please ADD the PCI ADSL WAN Adapter ports in RAS "+
"setup (in the SERVICES tab) to enable you to "+
"use RAS over the PCI ADSL WAN Adapter."
InvokeRasError = "The PCI ADSL WAN Adapter setup encountered an error "+
"while invoking the RAS setup INF file (OEMNSVRA.INF). "+
"Please make sure that the file is present in the "+
"System32 directory and is the proper file."
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.