************************************************************
** ENU *****************************************************
************************************************************
*
* Intel(R) INF Installation Utility
* Release Notes
*
* Revision: Version 2.20 Production Release Build 0006
* Date: November 12, 1999
*
* NOTE: This document refers to systems containing the
* following Intel Chipset(s):
* Intel(R) 810 Chipset
* Intel(R) 810E Chipset
* Intel(R) 820 Chipset
* Intel(R) 840 Chipset
*
* Intel(R) 430TX PCIset
* Intel(R) 440BX AGPset
* Intel(R) 440DX AGPset
* Intel(R) 440EX AGPset
* Intel(R) 440GX AGPset
* Intel(R) 440LX AGPset
* Intel(R) 440MX Chipset
* Intel(R) 440ZX AGPset
*
*
************************************************************
************************************************************
************************************************************
* CONTENTS OF THIS DOCUMENT
************************************************************
This document contains the following sections:
1. Overview
2. Updated Product Information
3. Release Specific Information
3A. New Features Included in This Release
3B. Fixes Included in This Release
3C. Software Sightings and/or Errata for this Release
3D. Testing Information for This Release
4. Troubleshooting Information
************************************************************
* 1. OVERVIEW
************************************************************
These release notes outline the new features and key changes
of this software since the last release. Additional
information regarding troubleshooting, software sightings,
and bug fixes is also included here.
************************************************************
* 2. UPDATED PRODUCT INFORMATION
************************************************************
Revision: Version 2.20 Production Release Build 0006 Information:
1. Updated Readme.txt to include Intel(R) 820 Chipset
information.
2. The following Intel chipsets and components are supported
by this release of the INF Files for Intel(R) Chipsets:
Intel(R) 810 Chipset
Intel(R) 810E Chipset
Intel(R) 820 Chipset
Intel(R) 840 Chipset
Intel(R) 430TX PCIset
Intel(R) 440BX AGPset
Intel(R) 440DX AGPset
Intel(R) 440EX AGPset
Intel(R) 440GX AGPset
Intel(R) 440LX AGPset
Intel(R) 440MX Chipset
Intel(R) 440ZX AGPset
Intel(R) 82801AA/AB I/O Controller Hub
Intel(R) 82802 Firmware Hub
Intel(R) 82806AA PCI 64-bit Hub
3. Windows* 98 Digital Signature Files are installed for
the following INF files:
440MXCOR.INF
440MXIDE.INF
440MXUSB.INF
810.INF
820.INF
820B.INF
840.INF
ICHx.INF
ICHxIDE.INF
ICHxSMB.INF
ICHxUSB.INF
IFWH.INF
P64H.INF
P64HRES.INF
4. Added support for Windows* Millennium Operating System
************************************************************
* 3. RELEASE SPECIFIC INFORMATION
************************************************************
This section includes new features from the previous release
and/or updated information about the product that was added
after the primary documentation was completed.
************************************************************
* 3A. NEW FEATURES INCLUDED IN THIS RELEASE
************************************************************
Revision: Version 2.20 Production Release Build 0006 Information:
1. Updated Readme.txt to include Intel(R) 820 Chipset
information.
2. Windows* 98 Digital Signature Files are included for certain INF
files. For Windows 98, Windows 98 Second Edition and
Windows Millennium, the following files are installed to the
<WINDIR>\CATROOT\{F750E~1 directory:
For systems running Windows 98:
440MXCOR.CAT
440MXIDE.CAT
440MXUSB.CAT
810.CAT
820.CAT
820B.CAT
840.CAT
ICHx.CAT
ICHxIDE.CAT
ICHxSMB.CAT
ICHxUSB.CAT
IFWH.CAT
P64H.CAT
P64HRES.CAT
For systems running Windows 98 Second Edition:
810.CAT
820.CAT
820B.CAT
840.CAT
ICHxSMB.CAT
IFWH.CAT
P64H.CAT
P64HRES.CAT
For systems running Windows Millennium:
820.CAT
820B.CAT
840.CAT
IFWH.CAT
P64H.CAT
P64HRES.CAT
************************************************************
* 3B. FIXES INCLUDED IN THIS RELEASE
************************************************************
Revision: Version 2.20 Production Release Build 0006 Information:
1. No fixes are included in this release.
************************************************************
* 3C. SOFTWARE SIGHTINGS AND/OR ERRATA FOR THIS RELEASE
************************************************************
Revision: Version 2.20 Production Release Build 0006 Information:
1. This software will install the ICHxSMB.INF file on
systems running Windows 98 Second Edition, even though
the SMBus device is natively supported by the OS.
This is done to allow the easy update of any future SMBus
driver.
2. A "change driver" prompt may be displayed from Windows
setup on devices whose PCI Subsystem ID fields are
programmed to a non-zero value.
3. During the Windows setup stage, the USB keyboard
and mouse may not be accessible. This is because
the legacy USB driver may be inactive when Windows
enters the GUI mode. There is a small window
of time when it may not be possible for the system
to accept user input. Since the INF Installation
Utility may cause prompts during the Windows setup
stage, it should be ensured that the system BIOS
support for legacy USB keyboard and mouse is enabled.
4. When the INF Installation Utility is run on a system
with Windows 95 Original Release, the Device Manager
may report a memory resource conflict. This conflict
involves the resources allocated to PCI cards that are
located behind a PCI bridge. The operating system
incorrectly reports a memory conflict even though
the memory resources in question are fully contained
within the PCI bridge aperture. This appears to be a
known issue with the Windows 95 operating system.
The INF Installation Utility operation has no effect
on this issue.
5. Older revisions of the Intel(R) LANDesk Software Package
may cause a Device Manager warning when installed on
a system after the INF Installation Utility has been
executed on the system.
6. When running this software on an Intel(R) BX Chipset
platform, an extra reboot message might appear after
the operating system has completed setup.
************************************************************
* 3D. TESTING INFORMATION
************************************************************
Revision: Version 2.20 Production Release Build 0006 Information:
This software build has been validated with systems
containing the following Intel(R) Chipsets:
Intel(R) 810 Chipset
Intel(R) 810E Chipset
Intel(R) 820 Chipset
Intel(R) 840 Chipset
Intel(R) 440MX Chipset
************************************************************
* 4. TROUBLESHOOTING INFORMATION
************************************************************
Please refer to Readme.txt for the list of the general
troubleshooting techniques.
************************************************************
************************************************************
* DISCLAIMER
************************************************************
Intel is making no claims of usability, efficacy or
warranty.
The INTEL SOFTWARE LICENSE AGREEMENT
(OEM / ISV Distribution & Single User)
completely defines the licensed use of this software.
************************************************************
Information in this document is provided in connection with
Intel products. No license, express or implied, by estoppel
or otherwise, to any intellectual property rights is granted
by this document. Intel assumes no liability whatsoever,
and Intel disclaims any express or implied warranty,
relating to sale and/or use of Intel products including
liability or warranties relating to fitness for a particular
purpose, merchantability, or infringement of any patent,
copyright or other intellectual property right. Intel
products are not intended for use in medical, life saving,
or life sustaining applications.
************************************************************
Intel Corporation disclaims all warranties and liabilities
for the use of this document and the information contained
herein, and assumes no responsibility for any errors which
may appear in this document, nor does Intel make a
commitment to update the information contained herein. Intel
reserves the right to make changes to this document at any
time, without notice.
************************************************************
************************************************************
* Third-party brands and names are the property of their
respective owners.
Copyright (c) Intel Corporation, 1998-1999
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.