Voodoo Graphics Based 3D Accelerators Driver Kit v3.0 Voodoo Graphics Glide Driver Version: 2.46 Voodoo Graphics Glide3 Driver Version: 3.00 Voodoo Graphics DirectX Release Number : 2.16 Voodoo Graphics DirectX Driver Version: 4.10.01.0016 Platform: Windows 95/98 and DOS Copyright ( 1997-98 3Dfx Interactive, Inc. ) All Rights Reserved 3Dfx Interactive, Inc. Website: http://www.3dfx.com News Server: news://news.3dfx.com This product may be covered by one or more of the following US patents: 5,724,561 5,740,343 ======================================================================= What's in the distribution? ======================================================================= This distribution contains Glide, Glide3, Direct3D drivers for Voodoo Graphics Based 3D Accelerators and the Voodoo Graphics Control Panel Applet. The following Voodoo Graphics boards will function with these drivers: - 3Dfx Interactive Voodoo Graphics reference boards Included Files -------------- 3DFXPS.DLL - Control Panel Applet MM3DFX.DRV - DirectDraw Driver MM3DFX16.DLL - DirectDraw 16 Bit DLL MM3DFX32.DLL - DirectDraw 32 Bit DLL FXMEMMAP.VXD - Voodoo VXD for Mapping Memory MSVCRT.DLL - Microsoft Redistributable File GLIDE2X.DLL - Win95/98 Glide for Voodoo2 (Supports Glide 2.31+) FXOEM2X.DLL - Win95/98 Glide OEM Extension DLL GLIDE2X.OVL - DOS Glide for Voodoo2 (Supports Glide 2.31+) GLIDE3X.DLL - Win95/98 Glide3 for Voodoo2 VOODOO.INF - INF File for installing Drivers LICENSE.TXT - 3Dfx License Agreement MANIFEST.TXT - Listing and size of files README.TXT - This File ======================================================================= Installation ======================================================================= Requirements ------------ - Windows 95 or Windows 98 - PC with a Pentium II, Pentium Pro, Pentium or similar processor - One free PCI slot (or two free PCI slots for SLI) - 16MB of RAM or more Suggested Installation ------------ The installation below can vary depending on which version of Windows is installed. To determine the Windows 95 version click Start, Settings, Control Panel. Double-click on the system icon. If the Windows version is 4.00.950b, Windows 95 OEM SR2 is running. Existing Drivers Installed or PCI Multimedia Device shown in Device Mgr ----------------------------------------------------------------------- 1) Start Windows and extract the drivers to a temporary directory. 2) Open Device Manager (Start, Settings, Control Panel, System) 3) Locate the existing reference to the card it will be listed as: Reference Card: Other Devices / PCI Multimedia Device or Sound, Video, Game Controllers / Voodoo2 4) Double Click on the card, then click the driver Tab Windows 95 Standard Release users: Click "Change Driver" and choose "Have Disk" Windows 95 OEM SR2 users: Click "Update Driver" then click the Next Button. Click "Other Locations" Windows 98 users: Click "Update Driver" then click the Next Button twice on the Detection Dialog Box. Ensure that "Specify a Location" is checked and "Microsoft Windows Update" is not checked. Click Browse to continue. 5) Point the driver location to where the files are extracted to and click OK. Windows Standard Release 95 users: Select "Voodoo2 3D Accelerator" from the List and click OK. Click OK again to save changes in Device Manager. Windows 95 OEM SR2 Users: Click on Finish to continue. Windows 98 users: Click on Next to continue. 6) You MAY then be prompted to insert the "Voodoo Graphics Drivers for Windows 9X" Disk. Again, point to the path you extracted the files to and press OK. 7) Windows will copy the drivers. Reboot the system when prompted 8) Install DirectX 5.0 or higher. (If not already installed) No Current Drivers Installed --------------------------------------------------- 1) Start Windows and extract the drivers to a temporary directory. 2) Shutdown Windows, Power off the system and install your Voodoo2 3D board into a PCI slot. 3) Restart Windows after hardware installation. 4) Windows will detect a "PCI Multimedia Device", you need to: Windows 95 Standard Release users: Select "Use Driver from Mfr" and click OK Windows 95 OEM SR2 users: Click the Next Button on the Detection Dialog Box. Then click "Other Locations" Windows 98 users: Click the Next Button twice on the Detection Dialog Box. Ensure that "Specify a Location" is checked and "Microsoft Windows Update" is not checked. Click Browse to continue. 5) Point the driver location to where the files are extracted to and click OK. (Windows 98: You will need to click on Next to continue) 6) You MAY then be prompted to insert the "Voodoo2 Drivers for Windows 9X" Disk. Enter the path the drivers are extracted to and press OK. 7) Windows will copy the drivers. Reboot the system when prompted 8) Install DirectX 5.0 or higher. (If not already installed) Troubleshooting --------------- #### Problem: After installing this driver, the Control panel applet I had for a Voodoo Graphics card is gone.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.