release.txt Qlogic QLA12160 Miniport Driver for Windows NT Release Notes Version 7.20 08/16/01 * Release Version 7.20 Beta1 06/14/01 * Added self discover code Verion 7.19 05/04/01 * Fixed passthrough Version 7.18 04/12/01 * Added passthrough support * Fixed create pseudo device logic Version 7.17 02/02/01 * Updated Risc Code to 10.04.30 Version 7.16 12/4/00 * not to set check condition for data underrun case * Fixed the code to create pseudo device when the termination * is disabled on the HBA. Version 7.14.00 06/01/00 * Updated Risc Code to 10.04.08 * Changed firmware feature mask to read bit 8: Disable Reselection Fairness * Added Qlogic pseudo device to close ER4166 and ER4233 * Fixed srbComplete flag * SCSI utility changes * Changed serial number reading * Copy sense data for check condition * Added Interrupt counter Version 7.13 03/13/00 * Added 1080 source share * Retry once Initialize failure * Changes for domain validation Version 7.12 02/29/00 * Conditional build update risc code taken out. * Conditional build NVRAM Struct for 1280 * Fixed IOCTLS for SCSI Utility * Added passthrough IOCTL * Moved Device Extension strutures to header file * Update 12160 Risc code to 10.04.00 * Supports SCSI Utility Version 7.09 12/21/99 * DVT Release Version Version 7.09 Beta 1 12/17/99 * Added more IOCTLS for Scsi diagnostics, fixed old IOCTLS * Source Code merge to be able to build 1280 drivers Version 7.08 12/09/99 * Set the termination control registers before starting the firmware Version 7.08 BETA 2 12/03/99 * Fixed code to run on one bus for 10160 * Reset the chip when the adapter is taken offline * Updated Risc Code to 10.01.27 Version 7.08 BETA 11/23/99 * Fixed a bug Isr Dpc * Clear sema before risc interrupt Version 7.07 11/05/99 * Updated Risc Code to 10.01.24 * Fixed a bug in the tag queue settings * Removed code to pause risc to generate ints * At the end of mailbox routine * Added Reset call routine called from the timer * to allow port driver synchronize this call with isr Version 7.06 10/20/99 * Updated Risc Code 10.01.19 * Added code run 12160/10160 with the same driver * Added DMI IOCTL support * Runs with Qldirect version 7.02.00 * Fixed termination control bug Version 7.05 09/17/99 * Updated Risc Code to 10.01.09 Version 7.04 09/14/99 * Updated Risc Code to 10.01.07 Version 7.03 09/09/99 * Updated Risc Code to 10.01.06 Version 7.02 08/19/99 * Updated Risc Code to 10.01.01 Version 7.01 07/30/99 * Fixed a bug in the CleanupafterReset routine * Updated Risc Code to 10.01.00 Version 7.00 05/15/99 * Initial VersionDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.