1. Dpt.zip Driver
2. readme.txt File Contents

readme.txt Driver File Contents (Dpt.zip)

Drivers for Netware5 and Netware6

 BKSTOSM.ham Vers.1.18
 I2OPCI.nlm  Vers.1.10
 IOPX.nlm    Vers.1.28

Supported Adaptec Raid Controllers:
2000S; 2100S; 3200S;

1. Installation Netware5 and Netware6
before start the Netware installation
copy all files A:\Driver\*.* to C:\NWUPDATE

1a. Netware6 installation
  Include NBI.nlm (fix for serverWork Chipset)

1b. Netware5 installation
  exclude the file NBI.nlm


2.Installation Adaptec 2000S
Support for Adaptec Raidcontroller 2000S (Nighthawk) in Netware5 and Netware6

Driver installation description for Nighthawk in Netware 5/6

2a.Nighthawk is boot controller

copy all files A:\Driver\*.* to C:\NWUPDATE

or 

during the install of Novell, the Nighthawk will not be auto-detected 
- so you will need to press the INS key and then F3 to point the installer to the floppy.
You would then select the I2OPCI.NLM file from the floppy.
 
Then when the driver is loaded, a normal install will proceed and the installer will prompt you to load the BKSTROSM.HAM from the CD-ROM.  However, you need to use the updated BKSTROSM.HAM on the floppy.  So when the BKSTROSM is listed as a driver to be loaded, highlight that file and press the DEL key.  Then press the INS key and then F3 to point the installer to the floppy, and select the BKSTROSM.HAM from the floppy.
 
2b.Nighthawk is not boot controller (update driver after Netware 5.x installation)

load nwconfig
Driver Options>Configure disc and storage device drivers
select an additional driver
press the INS key
choose the Path a:\
choose BKSTOSM.ham
choose the server boot bath where Server.exe will be e.g C:\NWSERVER
BKSROSM.ham I2OPCI.nlm and IOPX.nlm will be instal

after reboot check the version for

module BKSTOSM.ham Vers.1.18
module I2OPCI.nlm  Vers.1.10
module IOPX.nlm    Vers.1.28



3. Storage Manager Installation: 
   Load a:dptinst


DS4 L.N. 08.02.2002