-------------------------------------------------------------------
- CHIPDRIVE SETUP - OEM Core Setup Module -
- © 1998-2003, SCM Microsystems -
-------------------------------------------------------------------
This readme will explain the options for the TOWITOKO
'OEM Core Setup Module'. This setup module will provide all
functions for any application setup program that wants to install
the TOWITOKO CHIPDRIVE smartcard terminal drivers.
List of Files
-------------
LIESMICH.TXT 'OEM Core Setup Module' Infos (GER)
README.TXT 'OEM Core Setup Module' Infos (ENG)
SETUPTWK.EXE 'OEM Core Setup Module' Executeable
This is the ONLY file you will need to distribute
Simply start this setup to install the 'standard'
CHIPDRIVE drivers incl. CHIPDRIVE mouse support and
the PC/SC IFD Handler.
TWKPNP.VXD,
TWKPNP.SYS,
TWKUSB.SYS,
TWKCD.INF files needed for Plug&Play installation
optional files:
SCBASE_D.EXE the PC/SC base components (german)
SCBASE_E.EXE the PC/SC base components (english)
The base components are installed automatically under
Windows 95/98/ME/NT4 if a newer version isn't already
present. Before you try to install the components
manually, please read the section "PC/SC support"
below!
Functions provided by the 'OEM Core Setup Module'
-------------------------------------------------
- detection of language (currently german and english are supported)
- minimum GUI (configurable)
- version checking of the driver files
- removal of any older/existing TOWITOKO driver files
- error report to the user in case of any problems
- installation of all necessary driver files according to the
operating system: Windows 95/98/ME/NT4 SP3/2000XP
- installation of the mouse driver incl. the necessary registry
entries. This is highly OS-dependant
- installation of the PC/SC driver (IFD-Handler see below).
- creation of a log-file: SETUPTWK.LOG in the windows directory
- installation of the uninstall windows functionality
START->Settings->System->Software->CHIPDRIVE...
Uninstall entries
-----------------
The setup will ALWAYS create the appropriate uninstall entries.
The user can access these through the standard Windows interface:
START->Settings->System->Software->...
The following keys are supported:
* CHIPDRIVE device driver
This will remove ALL CHIPDRIVE related files and registry entries
including the other uninstall entries.
* CHIPDRIVE mouse driver
This will remove the CHIPDRIVE mouse driver only. This can be usefull
especially if the COM-port is to be used for several devices, because
the mousedriver will allocate the comport within the boot sequence.
* CHIPDRIVE PC/SC driver
This will remove only the PC/SC driver
Program options
---------------
The setup module can be called in several ways to fullfill your special
needs within another setup program:
INSTALL OPTIONS
SETUPTWK.EXE [nointro] [noexit] [nopcsc] [nomouse] [base|basealw]
[scn=OEM_NAME] [mcn=OEM_NAME]
nointro: this option will skip the initial message box ('Do you
want to install...')
noexit: this option will skip the final message box
('Installation OK')
nopcsc: this option will skip the PC/SC installation
nomouse: this option will force the setup NOT to install the
CHIPDRIVE mouse driver. It is not recommended to use
this option any longer since V2.14.xx
nobase: does not install the PC/SC base components, even if the
files SCBASE_D.EXE or SCBASE_E.EXE are found in the
current installation path.
basealw: installs the PC/SC base components under Windows
95/98/ME/NT4 without checking whether a newer version
is already installed. However, under Windows 2000, the
componets aren't installed either.
scn=XXX this parameter can be used to replace 'CHIPDRIVE' in any
context with your OEM name for the smartcard terminal.
Spaces must be replaced by '_'.
mcn=XXX this parameter can be used to display a PC/SC OEM
manufacturer name
UNINSTALL OPTIONS
SETUPTWK.EXE uninstall [nointro] [noexit] [onlymouse] [onlypcsc]
[scn=OEM_NAME] [mscn=OEM_NAME]
nointro: this option will skip the initial message box ('Do you
want to install...')
noexit: this option will skip the final message box
('Installation OK')
onlymouse: this option will uninstall only the CHIPDRIVE mouse driver
onlypcsc: this option will uninstall only the PC/SC drivers
scn=XXX this parameter can be used to replace 'CHIPDRIVE' in any
context with your OEM name for the smartcard terminal.
Spaces must be replaced by '_'.
mcn=XXX this parameter can be used to display a PC/SC OEM
manufacturer name
PC/SC support
-------------
Since driver version 2.13.05, the PC/SC interface is fully supported
and available under Windows 95/98/ME and NT4/2000/XP. The CHIPDRIVE
PC/SC driver fully fits into our driver structure. It can be used at
the same time together with any of the other interfaces (CT-API,
SCARD, NETS, ORGA, OCF etc.). The PC/SC driver does NOT occupy a
COM port, but allows you to use any other device after disconnection
of the CHIPDRIVE.
Please note, that using the PC/SC interface under Windows 95/98/ME/NT4
also requires the installation of Microsoft's PC/SC base components.
Since 2.14.17 there is also a driver version available at our homeapge
which includes the the files SCBASE_D.EXE (german) und SCBASE_E.EXE
(english). The base componentes will be installed automatically under
Windows 95/98/ME/NT, if a newer version isn't already present.
Important: Since Windows 2000/XP already includes the latest version
of the PC/SC base components, the CHIPDRIVE driver does
not install them. Furthermore, you must never try to
install the components manually, this will corrupt the
system and a complete re-installation of Windows 2000/XP
could become necessary!
CHIPDRIVE USB support
---------------------
Since version 2.14.16 the driver also supports the USB versions of
the different CHIPDRIVE models unter Windows 98 Second Edition,
Windows ME, Windows 2000 and Windows XP. Older Windows version are
not supported.
The USB devices are accessed via a virtual COM port, this can be
configured with the CHIPDRIVE Diagnosis Tool in the control panel
This provides maximum compatibility with older applications, there
are no changes necessary.
CHIPDRIVE Diagnosis Tool
-----------------------
Since version 2.14.16 a diagnoses tool is installed to the control
panel.
-------------------------------------------------------------------
- © 1998-2003, SCM Microsystems -
- Oskar-Messter-Strasse 13 -
- 85737 Ismaning -
- GERMANY -
- http://www.scmmicro.com -
- -
- CHIPDRIVE is a Registered Trademark of SCM Microsystems GmbH -
-------------------------------------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.