[IntstallOptions] Install_3NIC_Diag = "YES" Install_Shortcuts = "YES" Install_Installer = "NO" [Identification] OptionType = NetAdapter [PlatformsSupported] ISA EISA "Jazz-Internal Bus" PCI [Options] 3C90X 3C905 3C900 [DriverFilenameConstantsNDIS3] NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\el90xnd3.sys" ProductSoftwareImagePath = "%SystemRoot%\System32\drivers\el90xnd3.sys" ProductSoftwareUpgradePath = "\SystemRoot\System32\drivers\el90xnd3.sys" [DriverFilenameConstantsNDIS4] NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\el90xnd4.sys" ProductSoftwareImagePath = "%SystemRoot%\System32\drivers\el90xnd4.sys" ProductSoftwareUpgradePath = "\SystemRoot\System32\drivers\el90xnd4.sys" ;************************************************************************* ; For New NDIS4 driver that supports 905B and 905C ;************************************************************************* [905BCDriverFilenameConstantsNDIS4] NetEventDLL905BC = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\EL90xBC4.sys" ProductSoftwareImagePath905BC = "%SystemRoot%\System32\drivers\EL90xBC4.sys" ProductSoftwareUpgradePath905BC = "\SystemRoot\System32\drivers\EL90xBC4.sys" ;************************************************************************** [FileConstants] UtilityInf = "UTILITY.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" TrayIconExe = "TCAUDIAG.EXE" NetworkCardsKey = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\" Manufacturer = "3Com" EtherDiskVersion = "5.0" ProductMajorVersion = "1" ProductMinorVersion = "0" ProductReview = "1" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "El90x" NetRuleSoftwareType = "El90xSys ndisDriver El90xDriver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """El90xSys"" yes no container" NetRuleSoftwareClass = {"El90xDriver basic"} NetRuleSoftwareBindable = {"El90xDriver El90xAdapter non exclusive 100"} ProductHardwareName = "El90x" NetRuleHardwareBindForm = " yes yes container" ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" FunctionTitle = "3Com 3C90x Adapter Card Setup" ProductSoftwareDescription = "3Com 3C90x Adapter Driver" ProductSoftwareTitle = "3Com 3C90x Adapter Driver" 3CNUMBER = "3C90X" GROUP_NAME = "3Com EtherLink PCI NIC" NetRuleHardwareType = "El90x El90xAdapter" NetRuleHardwareClass = {"El90xAdapter basic"} ProductHardwareXXXXXTitle = "3Com EtherLink PCI NIC " ProductHardwareXXXXXDescription = "3Com EtherLink PCI NIC " ;--------------------these NICs use old NDIS4 driver -------------------------------- ProductHardware36944Title = "3Com EtherLink 10/100 PCI NIC (3C905-TX)" ProductHardware36944Description = "3Com EtherLink 10/100 PCI NIC (3C905-TX)" ProductHardware36945Title = "3Com EtherLink 10/100 PCI T4 NIC (3C905-T4)" ProductHardware36945Description = "3Com EtherLink 10/100 PCI T4 NIC (3C905-T4)" ProductHardware36864Title = "3Com EtherLink PCI TPO NIC (3C900-TPO)" ProductHardware36864Description = "3Com EtherLink PCI TPO NIC (3C900-TPO)" ProductHardware36865Title = "3Com EtherLink PCI Combo NIC (3C900-COMBO)" ProductHardware36865Description = "3Com EtherLink PCI Combo NIC (3C900-COMBO)" ;--------------------these NICs use new NDIS4 driver -------------------------------- ProductHardware36952Title = "3Com EtherLink 10/100 PCI Combo NIC (3C905B-COMBO)" ProductHardware36952Description = "3Com EtherLink 10/100 PCI Combo NIC (3C905B-COMBO)" ProductHardware37376Title = "3Com EtherLink 10/100 PCI NIC (3C905C-TX)" ProductHardware37376Description = "3Com EtherLink 10/100 PCI For Complete PC Management NIC (3C905C-TX)" ProductHardware36949Title = "3Com EtherLink 10/100 PCI NIC (3C905B-TX)" ProductHardware36949Description = "3Com EtherLink 10/100 PCI TX NIC (3C905B-TX)" ProductHardware36954Title = "3Com EtherLink 100 PCI Fiber NIC (3C905B-FX)" ProductHardware36954Description = "3Com EtherLink 100 PCI Fiber NIC (3C905B-FX)" ProductHardware36868Title = "3Com EtherLink PCI TPO NIC (3C900B-TPO)" ProductHardware36868Description = "3Com EtherLink PCI TPO NIC (3C900B-TPO)" ProductHardware36869Title = "3Com EtherLink PCI Combo NIC (3C900B-COMBO)" ProductHardware36869Description = "3Com EtherLink PCI Combo NIC (3C900B-COMBO)" ProductHardware36870Title = "3Com EtherLink PCI TPC NIC (3C900B-TPC)" ProductHardware36870Description = "3Com EtherLink PCI TPC NIC (3C900B-TPC)" ProductHardware36874Title = "3Com EtherLink PCI Fiber NIC (3C900B-FL)" ProductHardware36874Description = "3Com EtherLink PCI Fiber NIC (3C900B-FL)" AdapterType = 5 ; List of NICs that use old NDIS4 driver CFIDList = {36944, 36945, 36864, 36865} ; List of NICs that use new NDIS4 driver (905B and 095C) CFIDListFor905BC = {36868, 36869, 36870, 36874, 36949, 36952, 36954, 37376} TrayIconExe = TCAUDIAG InstallerExe = TCAUDIAG UnInstallerEXE = UN3C90XA [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers NT350VersionConstant = "3.50" NT310VersionConstant = "3.10" NT400VersionConstant = "(4.0)" INF_PROCESSER = "I386" DIAGCARDTYPE = "TCAUM90X" [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [DiagRegistry] OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE" $(!REG_KEY_WRITE) SOFTKEY OpenRegKey $(SOFTKEY) "" "3Com" $(!REG_KEY_WRITE) COMKEY ifstr $(COMKEY) == "" CreateRegKey $(SOFTKEY) {"3Com", 0, GenericClass} "" $(!REG_KEY_WRITE) "" COMKEY endif OpenRegKey $(COMKEY) "" "TCAUDIAG" $(!REG_KEY_WRITE) TCAUDIAGKEY ifstr $(TCAUDIAGKEY) == "" CreateRegKey $(COMKEY) {"TCAUDIAG", 0, GenericClass} "" $(!REG_KEY_WRITE) "" TCAUDIAGKEY endif OpenRegKey $(TCAUDIAGKEY) "" "TCAUM90X" $(!REG_KEY_WRITE) TCAUM90XKEY ifstr $(TCAUM90XKEY) == "" CreateRegKey $(TCAUDIAGKEY) {"TCAUM90X", 0, GenericClass} "" $(!REG_KEY_WRITE) "" TCAUM90XKEY endif SetRegValue $(TCAUM90XKEY) {"DriverNames", 0, $(!REG_VT_SZ), "3C90X.COM;EL90X.DOS;SYSTEM\EL90XND3.SYS;SYSTEM\EL90XND4.SYS;SYSTEM\EL90XBC4.SYS"} OpenRegKey $(TCAUM90XKEY) "" "Extensions" $(!REG_KEY_WRITE) ExtensionsKEY ifstr $(ExtensionsKEY) == "" CreateRegKey $(TCAUM90XKEY) {"Extensions", 0, GenericClass} "" $(!REG_KEY_WRITE) "" ExtensionsKEY endif OpenRegKey $(ExtensionsKEY) "" "DA" $(!REG_KEY_WRITE) DAKEY ifstr $(DAKEY) == "" CreateRegKey $(ExtensionsKEY) {"DA", 0, GenericClass} "" $(!REG_KEY_WRITE) "" DAKEY endif SetRegValue $(DAKEY) {"CPLName", 0, $(!REG_VT_SZ), "DAINST.CPL"} CloseRegKey $(SOFTKEY) CloseRegKey $(COMKEY) CloseRegKey $(TCAUDIAGKEY) CloseRegKey $(TCAUM90XKEY) CloseRegKey $(ExtensionsKEY) CloseRegKey $(DAKEY) return [InstallOption] set CurrLang = $($0) set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms IntstallOptions read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = "OK" endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + ;*********** add this to check correct platform supported******** ifstr(i) $(!STF_PLATFORM) == "Alpha" set CommonStatus = STATUS_USERCANCEL goto end else-ifstr(i) $(!STF_PLATFORM) == "Alpha_AXP" set CommonStatus = STATUS_USERCANCEL goto end endif set CurrentVersionValue = "" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt Ifstr(i) $(KeyNt) != "" GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue Debug-Output "$(InfFile) : WinNT CurrentVersion ="$(CurrentVersionValue) CloseRegKey $(KeyNt) Endif ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) set NDIS_VER = NDIS4 ;********************************************************************************* read-syms 905BCDriverFilenameConstants$(NDIS_VER) ;********************************************************************************** else set NDIS_VER = NDIS3 endif read-syms DriverFilenameConstants$(NDIS_VER) ifstr(i) (*($(CurrentVersionValue),4)) == $(NT310VersionConstant) Debug-Output "$(InfFile) : Configureadapter" set Error = "Windows NT v3.10 is not support by this product" goto fatal endif Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure ifstr $(!STF_PLATFORM) == $(INF_PROCESSER) set CommonStatus = STATUS_USERCANCEL goto end else-Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo else set StartLabel = configureadapter endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif Debug-Output "$(InfFile) : ==================================================" Debug-Output "$(InfFile) : STF_CWDIR is: "$(!STF_CWDIR) Debug-Output "$(InfFile) : STF_SRCDIR is: "$(!STF_SRCDIR) Debug-Output "$(InfFile) : STF_LANGUAGE is: "$(!STF_LANGUAGE) Debug-Output "$(InfFile) : Option is: "$(Option) Debug-Output "$(InfFile) : !STF_NCN_InstallMode is:"$(!NTN_InstallMode) Debug-Output "$(InfFile) : !STF_NCDETECT is: "$(!STF_NCDETECT) Debug-Output "$(InfFile) : !STF_NCOPTION is: "$(!STF_NCOPTION) Debug-Output "$(InfFile) : !STF_NCDETCARD is: "$(!STF_NCDETCARD) Debug-Output "$(InfFile) : !STF_NCDETINFO is: "$(!STF_NCDETINFO) Debug-Output "$(InfFile) : !STF_GUI_UNATTENDED is: "$(!STF_GUI_UNATTENDED) Debug-Output "$(InfFile) : !STF_BusType is $(!STF_BUSTYPE)" Debug-Output "$(InfFile) : !STF_BusTypeList is $(!STF_BUSTYPELIST)" Debug-Output "$(InfFile) : ==================================================" set from = $(fatal) set to = $(fatal) goto $(StartLabel) installadapter = + Debug-Output "$(InfFile) : Installadapter" OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(!REG_KEY_READ) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else set OldVersionExisted = $(TRUE) endif Endif Goto adapteroptions configureadapter = + Debug-Output "$(InfFile) : Configureadapter" set Error = "Cannot configure the software component" goto fatal adapteroptions = + Debug-Output "$(InfFile) : Adapteroptions" set from = adapteroptions ifstr(i) $(!NTN_InstallMode) == configure goto updateparameters endif installproduct =+ Debug-Output "$(InfFile) : installproduct" StartWait set AdapterList = $($R1) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_READ) KeyNt CloseRegKey $(KeyNt) Ifstr(i) $(KeyNt) == "" Debug-Output "$(InfFile) : AddSoftwareComponent" Debug-Output "$(InfFile) : --> $(Manufacturer)" Debug-Output "$(InfFile) : --> $(ProductSoftwareName)" Debug-Output "$(InfFile) : --> $(ProductSoftwareTitle)" Debug-Output "$(InfFile) : --> $(STF_CONTEXTINFNAME)" Debug-Output "$(InfFile) : --> $(ProductSoftwareImagePath)" Debug-Output "$(InfFile) : --> $(NetEventDLL)" Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) //=------------------ set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType905BC)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm905BC)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass905BC)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable905BC)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto fatalregistry endif Set SoftProductKey = $($R1) Set SoftNetRuleKey = $($R2) Set SoftServiceKey = $($R3) Set SoftParameterKey = $($R4) Set SoftLinkageKey = $($R5) set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {Review,$(NoTitle),$(!REG_VT_DWORD),$(ProductReview)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)},+ {EDVersion,$(NoTitle),$(!REG_VT_SZ),$(EtherDiskVersion)}} Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait goto fatalregistry endif endif Debug-Output "$(InfFile) : About to look for 3Com PCI Cards" set TargetVersion = *($(CurrentVersionValue),4) Debug-Output "$(InfFile) : Current Version:"$(TargetVersion) ifstr $(TargetVersion) == $(NT350VersionConstant) Debug-Output "Running on WindowsNT 3.50" set Version350 = $(TRUE) else Debug-Output "Running on WindowsNT 3.51 or higher" set Version350 = $(FALSE) endif ifint $(Version350) == $(TRUE) Debug-Output "Running on WindowsNT v3.50, Not using PCI Detection!!!" ifstr $(!STF_GUI_UNATTENDED) == "YES" Debug-Output "$(InfFile) : Running in GUI unattended mode" ifstr(i) $(!AutoNetInterfaceType) != "" set BusInterfaceType = $(!AutoNetInterfaceType) else set BusInterfaceType = 5 endif ifstr(i) $(!AutoNetBusNumber) != "" set BusNumber = $(!AutoNetBusNumber) else set BusNumber = 0 endif set NTDetected = $(FALSE) set AdapterList = {{$(Option),0, XXXXX}} Debug-Output "$(InfFile) : BusInterfaceType = $(BusInterfaceType)" Debug-Output "$(InfFile) : BusNumber = $(BusNumber)" else ;;; GUI_UNATTENDED=NO Debug-Output "$(InfFile) : Running 3.50 Bus Dialog" set BusInterfaceType = 5 set BusNumber = 0 set NTDetected = $(FALSE) Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardwareXXXXXDescription) $(BusInterfaceType) $(BusNumber) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set BusInterfaceType = $($R1) set BusNumber = $($R2) set AdapterList = {{$(Option),0, XXXXX}} Debug-Output "$(InfFile) : BusInterfaceType = $(BusInterfaceType)" Debug-Output "$(InfFile) : BusNumber = $(BusNumber)" endif ;;; end check GUI_UNATTENDED else ;;; Version350=FALSE Debug-Output "$(InfFile) : Running 3.51 or higher using PCI Dectection" set NTDetected = $(TRUE) set Vendor = 4279 set CFIDList = $(CFIDList) Debug-Output "$(InfFile) : VendorID = $(Vendor)" Debug-Output "$(InfFile) : CFIDList = $(CFIDList)" set AdapterList = {} ForListDo $(CFIDList) set-div CFID = $($) 1 set DeviceID = $($) Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CFID) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ForListDo $($R0) set AdapterList = >($(AdapterList), {*($($),1), *($($),2), $(DeviceID)}) EndForListDo EndForListDo ;*********************** Check 905BC cards here ************************************* ; assuming if there is more cards, they wil be added to the end of "AdapterList" ;************************************************************************************ set CFIDListFor905BC = $(CFIDListFor905BC) ForListDo $(CFIDListFor905BC) set-div CFID = $($) 1 set DeviceID = $($) Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CFID) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ForListDo $($R0) set AdapterList = >($(AdapterList), {*($($),1), *($($),2), $(DeviceID)}) EndForListDo EndForListDo ;************************************************************************************* ifstr(i) $(AdapterList) == {} set Error = $(CANNOT_FIND_ANY_CARD) set CommonStatus = USER_CANCEL set from = end goto nonfatal endif endif set ToInstallList = {} Debug-Output "$(InfFile) : Adapterlist = $(AdatperList)" ForListDo $(AdapterList) ifint $(NTDetected) == $(TRUE) set DetectedBusNum = *($($),1) set DetectedSlotNum = *($($),2) set DeviceID = *($($),3) Debug-Output "$(InfFile) : DetectedBusNumber = $(DetectedBusNum)" Debug-Output "$(InfFile) : DetectedSlotNum = $(DetectedSlotNum)" Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), + $(DetectedSlotNum), $(ProductHardware$(DeviceID)Description), $(ProductHardwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $(ToInstallList) == {} ifstr(i) $($R1) != "YES" set ToInstallList = >($(ToInstallList), $($)) endif endif endif EndForListDo ifstr(i) $(ToInstallList) == {} set Error = $(CANNOT_FIND_ANY_UNINSTALLED_CARD) set CommonStatus = USER_CANCEL set from = end goto nonfatal endif ForListDo $(ToInstallList) set DetectedBusNum = *($($),1) set DetectedSlotNum = *($($),2) set DeviceID = *($($),3) ;************************************************************************************** ; Check if 905BC NIC, change driver name under Eventlog and ImagePath in the registry ; to the name of the new driver for 905BC. Only do this with NT4.0 which use NDIS4 driver ;*************************************************************************************** set BoomCard = FALSE ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) ifstr(i) $(DeviceID) == "36944" set BoomCard = TRUE else-ifstr(i) $(DeviceID) == "36945" set BoomCard = TRUE else-ifstr(i) $(DeviceID) == "36864" set BoomCard = TRUE else-ifstr(i) $(DeviceID) == "36865" set BoomCard = TRUE endif endif ;********************************************************************************** Debug-Output "$(InfFile) : DetectedBusNumber = $(DetectedBusNum)" Debug-Output "$(InfFile) : DetectedSlotNum = $(DetectedSlotNum)" Debug-Output "$(InfFile) : Installing Card at $(DetectedBusNum):$(DetectedSlotNum)!" Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif Set HardNetCardKey = $($R1) Set HardNetRuleKey = $($R2) Set HardParameterKey = $($R3) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(DeviceID)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(DeviceID)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)},+ {EDVersion,$(NoTitle),$(!REG_VT_SZ),$(EtherDiskVersion)}} Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set BusTypeNum = 5 ifstr(i) $(DeviceID) == "36944" set CardType = 0 else-ifstr(i) $(DeviceID) == "36945" set CardType = 0 else-ifstr(i) $(DeviceID) == "36949" set CardType = 0 else set CardType = 2 endif ifint $(NTDetected) == $(TRUE) set BusNumber = $(DetectedBusNum) set SlotNum = $(DetectedSlotNum) set BusInterfaceType = $(BusTypeNum) set WakeOnLan = YES set WakeOnLink = NO set FlowControl = YES Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)" ifstr(i) $(BoomCard) == TRUE Set NewValueList = {+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ {Slot,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)},+ {WakeOnMagic,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLan)},+ {WakeOnLink,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLink)},+ {FlowControl,$(NoTitle),$(!REG_VT_SZ),$(FlowControl)},+ } else Set NewValueList = {+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ {Slot,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)},+ ;;;{WakeOnMagic,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLan)},+ ;;;{WakeOnLink,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLink)},+ ;;;{FlowControl,$(NoTitle),$(!REG_VT_SZ),$(FlowControl)},+ } endif Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)" Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif Set NewValueList = { {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)} } Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)" Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif else Set NewValueList = {+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ } Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)" Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif Set NewValueList = {+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+ {CardType,$(NoTitle),$(!REG_VT_DWORD),$(CardType)},+ } ;;;{MediaType,$(NoTitle),$(!REG_VT_SZ),"HardwareDefault"},+ ;;;} Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)" Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" Shell $(UtilityInf), AddDefaultNetcardParameters, $(HardParameterKey) endif set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Debug-Output "$(InfFile) : HardwareRuleKey = $(NewValueList)" Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeEror endif CloseRegKey $(HardNetCardKey) CloseRegKey $(HardNetRuleKey) CloseRegKey $(HardParameterKey) EndForListDo ;******************************************************************************************** ; Update NetEventdll and ImagePath for 905B and 905C card ;******************************************************************************************** ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) ifstr(i) $(BoomCard) == FALSE OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyService Ifstr $(KeyService) != "" SetRegValue $(KeyService) {ImagePath,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareUpgradePath905BC)} else goto fatalregistry endif CloseRegKey $(KeyService) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\EventLog\System\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyEventLog Ifstr $(KeyEventLog) != "" SetRegValue $(KeyEventLog) {EventMessageFile,$(NoTitle),$(!REG_VT_SZ),$(NetEventDLL905BC)} else goto fatalregistry endif CloseRegKey $(KeyEventLog) goto NextCommon else goto ForBoom endif endif ForBoom =+ ;******************************************************************************************** OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyService Ifstr $(KeyService) != "" SetRegValue $(KeyService) {ImagePath,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareUpgradePath)} else goto fatalregistry endif CloseRegKey $(KeyService) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\EventLog\System\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyEventLog Ifstr $(KeyEventLog) != "" SetRegValue $(KeyEventLog) {EventMessageFile,$(NoTitle),$(!REG_VT_SZ),$(NetEventDLL)} else goto fatalregistry endif CloseRegKey $(KeyEventLog) ;****************************************************************************************** NextCommon =+ ;****************************************************************************************** install "Install-Uninstaller" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(ProductSoftwareName) $(!REG_KEY_ALL_ACCESS) + KeyNt set TrayIconList = {TCAUDIAG,$(NoTitle),$(!REG_VT_SZ),$(DIAGCARDTYPE)} SetRegValue $(KeyNt) $(TrayIconList) CloseRegKey $(KeyNt) ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) ifstr $(Install_3NIC_Diag) == "YES" RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-upgrade" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" + $(!REG_KEY_ALL_ACCESS) KeyNt ifstr $(KeyNt) == "" CreateRegKey $(!REG_H_LOCAL) {"SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall", + 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt endif OpenRegKey $(KeyNt) "" "3ComNicUnInstall" $(!REG_KEY_ALL_ACCESS) KeyNt2 ifstr $(KeyNt2) == "" CreateRegKey $(KeyNt) {"3ComNicUnInstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) + "" KeyNt2 endif set NewValueList = {{DisplayName, $(NoTitle), $(!REG_VT_SZ), "3Com NIC Diagnostics"}, + {UninstallString, $(NoTitle), $(!REG_VT_SZ), $(UnInstallerEXE).EXE}} Shell $(UtilityInf), AddValueList, $(KeyNt2), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(KeyNt) CloseRegKey $(KeyNt2) endif endif ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" + $(!REG_KEY_ALL_ACCESS) KeyNt set TrayIconList = {TCASUTIEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -off"} DeleteRegValue $(KeyNt) "COMSMDEXE" SetRegValue $(KeyNt) $(TrayIconList) CloseRegKey $(KeyNt) ifstr $(Install_3NIC_Diag) == "YES" Debug-Output "$(InfFile) : (Install_3NIC_Diag) == "YES"" Shell "", DiagRegistry install "Install-3nicdiag" ifstr $(Install_Installer) == "YES" ifstr(i) $(!STF_GUI_UNATTENDED) != "YES" ForListDo $(ToInstallList) set BusNum = *($($),1) set SlotNum = *($($),2) RunProgram ExitCode "Windows Directory" "" $(InstallerExe).EXE + "cardtype=TCAUM90X" "bus="$(BusNum) "slot="$(SlotNum) EndForListDo endif endif set SRCDIR_OVERRIDE_Save = $(!STF_SRCDIR_OVERRIDE) set !STF_SRCDIR_OVERRIDE = $(SrcDir) Shell $(!STF_WINDOWSSYSPATH)\TCAITDI.INF, InstallOption, $(CurrLang),+ "TCAITDI" ,$(SrcDir), YES, YES, YES, NO set !STF_SRCDIR_OVERRIDE = $(SRCDIR_OVERRIDE_Save) ifstr(i) $(Install_Shortcuts) == "YES" Debug-Output "$(InfFile) : (Install_Shortcuts) == "YES"" RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-setup" Debug-Output "$(InfFile) : Enabling Tray Icon" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" + $(!REG_KEY_ALL_ACCESS) KeyNt set TrayIconList = {TCASUTIEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -off"} SetRegValue $(KeyNt) $(TrayIconList) DeleteRegValue $(KeyNt) "COMSMDEXE" CloseRegKey $(KeyNt) endif endif endif ifint $(OldVersionExisted) == $(FALSE) Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Endif ;**************** check if 905BC and copy new NDIS4 driver ******************** ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) ifstr(i) $(BoomCard) == FALSE install "Install-OptionNewNDIS" goto endinstall else goto oldndis; endif endif oldndis =+ ;******************************************************************************** install "Install-Option" endinstall =+ ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif EndWait goto successful updateparameters =+ Debug-Output "$(InfFile) : Updateparameters" set HardParameterKey = $($R3) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(KeyParameters) goto successful bindingadapter =+ Debug-Output "$(InfFile) : bindingadapter" Return STATUS_SUCCESSFUL set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Debug-Output "$(InfFile) : removeadapter" Debug-Output "$(InfFile) : ----> $(ProductKeyName), $(!NTN_RegBase)" Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif ifstr(i) $(!STF_PLATFORM) == $(INF_PROCESSER) RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-inf" endif OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\TCAITDI" $(!REG_KEY_READ) KeyTCATDI ifstr $(KeyTCATDI) != "" Shell $(!STF_WINDOWSSYSPATH)\TCAITDI.INF, InstallOption, $(CurrLang),"TCAITDI" ,$(SrcDir), YES, YES, YES, -inf CloseRegKey $(KeyTCATDI) endif goto end UpgradeSoftware = + ;**************************************************************************************** ; Check if 905BC or Boomerang ;**************************************************************************************** set BoomCard = FALSE set CurrentCardPath = $(!NTN_RegBase) set TitleValue = "" set CardTitle = "" set NameTokenList = "" OpenRegKey $(!REG_H_LOCAL) "" $(CurrentCardPath) $(!REG_KEY_READ) CurrentCardKey Ifstr(i) $(CurrentCardKey) != "" GetRegValue $(CurrentCardKey) "Title" TitleValue set CardTitle = *($(TitleValue), 4) Split-String $(CardTitle) "()" NameTokenList set NameCode = *($(NameTokenList), 3) Ifstr(i) $(NameCode) == "3C905-TX" set BoomCard = TRUE Else-Ifstr(i) $(NameCode) == "3C905" ; name in oemsetup.inf provided by Microsoft set BoomCard = TRUE Else-Ifstr(i) $(NameCode) == "3C905-T4" set BoomCard = TRUE Else-Ifstr(i) $(NameCode) == "3C900-TPO" set BoomCard = TRUE Else-Ifstr(i) $(NameCode) == "3C900-COMBO" set BoomCard = TRUE endif CloseRegKey $(CurrentCardKey) Endif ;end checking currentCardKey ;**************************************************************************************** OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(!REG_KEY_ALL_ACCESS) KeyProduct Ifstr $(KeyProduct) != "" Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) install "Install-INF" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)} SetRegValue $(KeyProduct) {Review,$(NoTitle),$(!REG_VT_DWORD),$(ProductReview)} SetRegValue $(KeyProduct) {EDVersion,$(NoTitle),$(!REG_VT_SZ),$(EtherDiskVersion)} CloseRegKey $(KeyProduct) ;****************************************************************************************** ; If 905BC card, update the new NDIS driver ;****************************************************************************************** ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) ifstr(i) $(BoomCard) == FALSE OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyService Ifstr $(KeyService) != "" SetRegValue $(KeyService) {ImagePath,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareUpgradePath905BC)} else goto fatalregistry endif CloseRegKey $(KeyService) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\EventLog\System\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyEventLog Ifstr $(KeyEventLog) != "" SetRegValue $(KeyEventLog) {EventMessageFile,$(NoTitle),$(!REG_VT_SZ),$(NetEventDLL905BC)} else goto fatalregistry endif CloseRegKey $(KeyEventLog) goto ContinueUpgrade else goto UpdateToCorrectDriver endif ; end checking card endif ; end checking NT4.0 version UpdateToCorrectDriver =+ ;****************************************************************************************** OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyService Ifstr $(KeyService) != "" SetRegValue $(KeyService) {ImagePath,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareUpgradePath)} else goto fatalregistry endif CloseRegKey $(KeyService) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\EventLog\System\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyEventLog Ifstr $(KeyEventLog) != "" SetRegValue $(KeyEventLog) {EventMessageFile,$(NoTitle),$(!REG_VT_SZ),$(NetEventDLL)} else goto fatalregistry endif CloseRegKey $(KeyEventLog) ;***************************************************************************************** ContinueUpgrade =+ ;***************************************************************************************** OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase) $(!REG_KEY_ALL_ACCESS) KeyNt set LoopList = {1,2,3,4,5,6,7,8} set WinNTList = {WinNT,$(NoTitle),$(!REG_VT_SZ),YES} ifstr(i) $(BoomCard) == TRUE Set NewValueList = {{WakeOnMagic,$(NoTitle),$(!REG_VT_SZ),"YES"},+ {WakeOnLink,$(NoTitle),$(!REG_VT_SZ),"NO"},+ {FlowControl,$(NoTitle),$(!REG_VT_SZ),"YES"}} endif ForListDo $(LoopList) OpenRegKey $(KeyNt) "" $(ProductHardwareName)$($)"\Parameters" $(!REG_KEY_ALL_ACCESS) TestKey ifstr $(TestKey) != $(KeyNull) ifstr(i) $(BoomCard) == TRUE Shell $(UtilityInf), AddValueList, $(TestKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif OpenRegKey $(!REG_H_LOCAL) "" $(NetworkCardsKey)$($)"\NetRules" $(!REG_KEY_ALL_ACCESS) NetCardKey ifstr $(NetCardKey) != $(KeyNull) SetRegValue $(NetCardKey) {"InfName",$(NoTitle),$(!REG_VT_SZ),$(!UG_Filename)} CloseRegKey $(NetCardKey) endif CloseRegKey $(TestKey) endif EndForListDo else goto fatalregistry endif ifstr $(!STF_PLATFORM) == $(INF_PROCESSER) install "Install-Uninstaller" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(ProductSoftwareName) $(!REG_KEY_ALL_ACCESS) + KeyNt set TrayIconList = {TCAUDIAG,$(NoTitle),$(!REG_VT_SZ),$(DIAGCARDTYPE)} SetRegValue $(KeyNt) $(TrayIconList) CloseRegKey $(KeyNt) ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) ifstr $(Install_3NIC_Diag) == "YES" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" + $(!REG_KEY_ALL_ACCESS) KeyNt ifstr $(KeyNt) == "" CreateRegKey $(!REG_H_LOCAL) {"SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall",+ 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt endif OpenRegKey $(KeyNt) "" "3ComNicUnInstall" $(!REG_KEY_ALL_ACCESS) KeyNt2 ifstr $(KeyNt2) == "" CreateRegKey $(KeyNt) {"3ComNicUnInstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) + "" KeyNt2 endif set NewValueList = {{DisplayName, $(NoTitle), $(!REG_VT_SZ), "3Com NIC Diagnostics"},+ {UninstallString, $(NoTitle), $(!REG_VT_SZ), $(UnInstallerEXE).EXE}} Shell $(UtilityInf), AddValueList, $(KeyNt2), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(KeyNt) CloseRegKey $(KeyNt2) endif endif ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" + $(!REG_KEY_ALL_ACCESS) KeyNt set TrayIconList = {TCASUTIEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -off"} SetRegValue $(KeyNt) $(TrayIconList) DeleteRegValue $(KeyNt) "COMSMDEXE" CloseRegKey $(KeyNt) ifstr $(Install_3NIC_Diag) == "YES" Debug-Output "$(InfFile) : (Install_3NIC_Diag) == "YES"" Shell "", DiagRegistry install "Install-3nicdiag" set InstallMode_Save = $(!NTN_InstallMode) set !NTN_InstallMode = install set SRCDIR_OVERRIDE_Save = $(!STF_SRCDIR_OVERRIDE) set !STF_SRCDIR_OVERRIDE = $(SrcDir) Shell $(!STF_WINDOWSSYSPATH)\TCAITDI.INF, InstallOption, $(CurrLang), + "TCAITDI" ,$(SrcDir), YES, YES, YES, NO set !NTN_InstallMode = $(InstallMode_Save) set !STF_SRCDIR_OVERRIDE = $(SRCDIR_OVERRIDE_Save) ifstr(i) $(Install_Shortcuts) == "YES" Debug-Output "$(InfFile) : (Install_Shortcuts) == "YES"" RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-setup" Debug-Output "$(InfFile) : Enabling Tray Icon" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" + $(!REG_KEY_ALL_ACCESS) KeyNt set TrayIconList = {TCASUTIEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -off"} SetRegValue $(KeyNt) $(TrayIconList) DeleteRegValue $(KeyNt) "COMSMDEXE" CloseRegKey $(KeyNt) endif endif endif endif ;**************** check if 905BC and copy new NDIS4 driver ******************** ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) ifstr(i) $(BoomCard) == FALSE install "Install-OptionNewNDIS" goto laststep else goto upgradeOldNDIS; endif endif upgradeOldNDIS =+ ;******************************************************************************** install "Install-Option" ;********************************************************************************* laststep =+ ;********************************************************************************* ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-upgrade" goto end successful = + Debug-Output "$(InfFile) : Successful" goto end abandon = + Debug-Output "$(InfFile) : Abandon" ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif detect checkFileExist set Uninst = *($(uninstFound), 1) ifstr(i) $(Uninst) == "un3c90xa.exe" ifstr(i) $(!STF_PLATFORM) == $(INF_PROCESSER) RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-inf" endif endif OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\TCAITDI" $(!REG_KEY_READ) KeyTCATDI ifstr $(KeyTCATDI) != "" Shell $(!STF_WINDOWSSYSPATH)\TCAITDI.INF UserAbort CloseRegKey $(KeyTCATDI) endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Debug-Output "$(InfFile) : warning" Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Debug-Output "$(InfFile) : nonfatalinfo" Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS goto nonfatalmsg nonfatal = + Debug-Output "$(InfFile) : nonfatal" Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + Debug-Output "$(InfFile) : nonfatalmsg" ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "RemoveAdapter" endif fatalregistry = + Debug-Output "$(InfFile) : fatalregistry" Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fatal = + Debug-Output "$(InfFile) : fatal" ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + ifint $($ShellCode) == $(!SHELL_CODE_NO_SUCH_INF) Debug-Output "$(InfFile) : ShellCodeError - SHELL_CODE_NO_SUCH_INF" else-ifint $($ShellCode) == $(!SHELL_CODE_NO_SUCH_SECTION) Debug-Output "$(InfFile) : ShellCodeError - SHELL_CODE_NO_SUCH_SECTION" else Debug-Output "$(InfFile) : ShellCodeError - SHELL_CODE_ERROR" endif set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + Debug-Output "$(InfFile) : Setfailed" set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [checkFileExist] uninstFound = {} ? $(!LIBHANDLE) FindFileInstances $(!STF_WINDOWSSYSPATH)"\un3c90xa.exe" [Install-Option] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" Debug-Output $(InfName)"Adding files: Files-$(NDIS_VER), SrcDir=$(SrcDir)" AddSectionFilesToCopyList Files-$(NDIS_VER) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) AddSectionFilesToCopyList Files-DA $(SrcDir) $(!STF_WINDOWSSYSPATH) endif set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit ;*********************************************************************************** [Install-OptionNewNDIS] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" Debug-Output $(InfName)"Adding files: Files-$(NDIS_VER), SrcDir=$(SrcDir)" AddSectionFilesToCopyList Files-905BC$(NDIS_VER) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) AddSectionFilesToCopyList Files-DA $(SrcDir) $(!STF_WINDOWSSYSPATH) endif set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit ;************************************************************************************** [Install-Uninstaller] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-Uninstaller $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit [Install-3nicdiag] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-3nicdiag $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Cpl $(SrcDir) $(!STF_WINDOWSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit [Install-INF] set STF_VITAL = "" AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit [Source Media Descriptions] 1 = "3Com EtherDisk for EtherLink PCI NICs (Diskette 1)", TAGFILE = 3CDISK1 2 = "3Com EtherDisk for EtherLink PCI NICs (Diskette 2)", TAGFILE = 3CDISK2 3 = "3Com EtherDisk for EtherLink PCI NICs (Diskette 3)", TAGFILE = 3CDISK3 [ProductType] STF_PRODUCT = Winnt [Files-Inf] 1, oemsetup.inf,SIZE=36000, RENAME=$(!UG_Filename) [Files-3nicdiag] 1,TCAUDIAG.EXE, SIZE=165504 1,TCAUDIAG.URL, SIZE=15 1,TCAUDIAG.HLP, SIZE=20877 1,TCAUPROT.HLP, SIZE=20877 1,TCAUM90X.HLP, SIZE=20877 1,TCAUDCUS.TXT, SIZE=113 1,TCAUDEXP.TXT, SIZE=113 1,TCAUPROT.DLL, SIZE=12345 1,TCAUM90X.DLL, SIZE=12345 1,TCAMHWAC.DLL, SIZE=20198 1,TCAICCHG.SYS, SIZE=5000 1,TCAITDI.INF, SIZE=15000 [Files-Cpl] 1,DAINST.CPL SIZE=15000 [Files-Uninstaller] 1,UN3C90XA.EXE, SIZE=6617 [Files-NDIS3] 2,EL90xnd3.SYS , SIZE=25001 [Files-905BCNDIS4] 2,EL90xBC4.SYS , SIZE=25001 [Files-NDIS4] 2,EL90xnd4.SYS , SIZE=25001 [Files-DA] 2,DAINST.EXE, SIZE=800000 [LanguagesSupported] ENG [OptionsTextENG] 3C90X = "3Com EtherLink PCI NIC" [FileConstantsENG] ProCaption = "Windows NT NIC Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" ConnectionList = ^(ConnectionChoices, 1) ConnectionValues = ^(ConnectionChoices, 2) NoList = ^(NoChoices, 1) NoValues = ^(NoChoices, 2) ShellCodeErrorTitle = "Error: "$(Function$(Option)Title) ShellCodeErrorText = "Shell Code Error." CANNOT_FIND_ANY_CARD = "Network card is not present in the system" CANNOT_FIND_ANY_UNINSTALLED_CARD = "All the NICs supported by this product have already been installed." [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" ;(%VER OEMSETUP.INF - Installation file for 3C90X - v5.0.9)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.