1. power200b.zip Driver
2. WinXP.txt File Contents

WinXP.txt Driver File Contents (power200b.zip)

CNPower200 10/100Mbps PCI Fast Ethernet Adapter Windows XP Driver Installation Guide
************************************************************************************

The driver conforms to the Network Driver Interface Specification (NDIS)5.0,
and used with Microsoft Windows OS.


Contents
--------
    A) Install NDIS5.0 Miniport driver to Microsoft Windows XP
    B) Configure NDIS5.0 Miniport driver to Microsoft Windows XP
	

A)Install NDIS5.0 Miniport driver to Microsoft Windows XP
=========================================================
Importance:
  Because our NDIS5.0 driver had build-in the Windows XP CD. So, here have 2
  way to install the NDIS 5 driver;

  First way: 
     You just plug the CNPower200 10/100Mbps PCI Fast Ethernet Adapter into 
     the PCI slot of your machine. Then power on the machine, the system will
     auto install its driver.

  The other way:
     If you want to use the driver in diskette. First, you must deleted the 
     NETAN983.INF and NETAN983.PNF file at safe mode(Don't plug the NIC into 
     machine). Then shutdown the system and trace the following to install 
     driver.
  1. Plug the CNPower200 10/100Mbps PCI Fast Ethernet Adapter into one of 
     the Master PCI slots of your PCI platform.

  2. Turn on the power of PC then boot into Windows XP.

  3. Windows XP will prompt "PCI Ethernet Controller" in "New Hardware 
     Found" dialog box.

  4. Select "Search for suitable driver for your device(Recommand)" from 
     "Found New Hardware Wizard" dialog box, then click "Next" button.

  5. Select "Specify a location" from "Found New Hardware Wizard" dialog box
     , then click "Next" button.

  6. Insert the CNPower200 10/100Mbps PCI Fast Ethernet Adapter Diskette in your 
     floppy drive.

  7. Enter the driver pathname, i.e. A:\WinXP (or B:\), then click "OK" 
     button from "Found New Hardware Wizard" dialog box.

  8. "Found New Hardware Wizard" dialog box will find inf file.
     i.e. A:\WINXP\cnp200.INF, then click "Next" button.

  9. Windows XP will prompt; "CNPower200 10/100Mbps PCI Fast Ethernet Adapter" in 
     "Found New Hardware Wizard" dialog box, then click "Finish" button.

 10. Windows XP will prompt "New Connection" Wizard diag box, then click 
     "Next" button.

 11. You can Modify or Add your LAN protocol or LAN Service... form "LAN
     Wizard", and click "Next" button to continue.

 12. Type a name you want for this connection form "LAN Wizard" diag box,
     and click "Finish" button.

 13. Remove the CNPower200 10/100Mbps PCI Fast Ethernet Adapter Driver Diskette 
     from your floppy drive.

 

B) Configuring NDIS5.0 Miniport driver to Microsoft Windows XP
==============================================================
  1. Click the "My Computer" icon in the Main Program Group.

  2. Click the "Control Panel" icon from My Computer window.

  3. Click the "Network and Dial-up Connections" icon from the Control 
     Panel window.

  4. Select "CNPower200 10/100Mbps PCI Fast Ethernet Adapter" item from "Network" dialog 
     box, then click "Properties" button.

  5. Press "Configure" key.

  6. Click "Advanced" button from "CNPower200 10/100Mbps PCI Fast Ethernet Adapter Properties" 
     dialog box.

  7. Select the Media Type value (AutoDetect, 10BaseT, 10BaseT Full_Duplex,
     100BaseTX, 100BaseTX Full_Duplex) from "Value" item, then click OK 
     button from "CNPower200 10/100Mbps PCI Fast Ethernet Adapter Properties" dialog box.

  8. Click OK button from "Network" dialog box.




Trademarks:
Microsoft Windows XP is a trademark of Microsoft Corporation.