CNPower200 10/100Mbps PCI Fast Ethernet Adapter Packet Driver Installation Guide ******************************************************************************** I. The driver PKTDRV.COM can be used for the following: Ethernet Controller Provider CNPower200 10/100Mbps PCI Fast Ethernet Adapter PKTDRV syntax: PKTDRV [-#] [-a] [-t] [-f] [-s] [-n] [-w] [-u] [-h] <PD_INT_NO> Parameter Explain ---------------------------------------------------------------------------- [-#] The "-#" option will let the driver work on a specific adapter when multiple Fast Ethernet Controller Provider PCI adapters are found in the computer system. For example, "-1" means the first adapter will be activated by the driver, "-2" means the second adapter will be activated, ... etc. A maximum of 4 adapters are supported simulaneously. [-a] The "-a" option will let driver perform automatic media detection during driver initialization. The detection sequence is: TP 100Mbps Full Duplex ---> TP 10Mbps Full Duplex ---> TP 100Mbps Half Duplex ---> TP 10Mbps Half Duplex If no physical media is attached to the adapter then TP 100Mbps Full Duplex is the default media. [-t] The "-t" option sets the adapter line speed to 10Mbps. It is a dedicated option for the FastNIC Ethernet adapter. [-f] The "-f" option enables FULL_DUPLEX feature of the adapters. It has no effect except when Twisted Pair is used. [-s] The "-s" option sets the adapter line speed to 100Mbps. It is a dedicated option for the FastNIC Ethernet adapter. [-n] Your NOVELL server uses NOVELL ISO-like packets. Your NOVELL workstation uses NOVELL 8137 packets. You can use this option to convert NOVELL 8137 packets into NOVELL ISO-like packets. [-w] Steve Wallace added a hack to let the packet drivers run under Windows. This is not to be construed with the proper solution, which is to write a TCP/IP package for Windows. This hack is enabled only when you use the '-w' switch. [-u] This option unloads the Packet Driver. [-h] This option displays the on-line help. <PD_INT_NO> This specifies the software interrupt(INT) where you'll load the packet driver. It must be in the range 0x60 to 0x80. ---------------------------------------------------------------------------- Notice!! The PC/TCP kernel, by default, is loaded at interrupt 0x61 (so don't load the packet driver there!) Example: The following command line loads the Ethernet Controller Provider CNPower200 10/100Mbps PCI Fast Ethernet Adapter Packet Driver at software interrupt 60h, transmission media is automatical-detected: PKTDRV -a 0x60 or PKTDRV 0x60 ** Note ** The default transmission media is automatic-detection. The prefix of 0x to the parameters.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.