CNPower200 10/100Mbps PCI Fast Ethernet Adapter NetWare Driver Installation Guide
*********************************************************************************
Contents of the file:
A. File Description
B. Driver Installation for NetWare Server 3.12, 4.11, 5.0
C. Parameters Description for CNP200.LAN
A. File Description
-------------------
Filename Description
----------------------------------------------------------------------------
CNP200.LAN Fast Ethernet Controller Provider driver for CNPower200
10/100Mbps PCI Fast Ethernet Adapter. This driver complies
with NetWare ODI Server driver SPEC 3.31.
CNP200.LDI The driver (CNP200.LAN) installation information file for
NetWare Server 5.0(Moab), 4.11, 3.12.
B. Driver Installation for NetWare Server 4.11, 5.0
---------------------------------------------------------
1. Change directory to NetWare Server directory (for example: CD\NWSERVER)
2. Load NetWare Server System by typing "SERVER", then press <Enter>.
3. When the Server prompt appears, load the NetWare Server Installation
Utility. That is,
:LOAD INSTALL <- If you use NetWare 4.11
:LOAD NWCONFIG <- If you use Netware 5
4. Select "Driver options" from "Installtion Options" menu, then press
<Enter>.
5. Select "Configure network drivers" from "Driver Options" menu, then
press <Enter>.
6. Choose "Select a driver" from "Additional Driver Actions" menu, then
press <Enter>.
7. Press <Ins> to install an unlisted driver, then press <F3> to specify a
different path.
8. Insert Fast Ethernet Controller Provider FastNIC Adapter Driver
Diskette to your PC's floppy drive and specify the drive (A: or B:),
then press <Enter>.
9. Choose "CNPower200 10/100Mbps PCI Fast Ethernet Adapter Driver" from
"Select a driver to installed:" menu, then press <Enter>.
10. If necessary, choose "Select/Modify driver parameters and protocols"
from "Board CNP200_1 (Driver CNP200) Actions" menu, then press
<Enter> to set up the driver parameters. (Please refer to content F.)
Otherwise, select "Save parameters and load driver", then press <Enter>
11. Then, follow instructions to complete the driver installation.
C. Parameter Description for CNP200.LAN
----------------------------------------
The following parameters are used in CNP200.LAN.
1. SLOT: specifies which adapter is enabled when multiple Ethernet
adapters are found in your computer.
Ex: LOAD CNP200 SLOT=1 FRAME=ETHERNET_802.2
LOAD CNP200 SLOT=1 FRAME=ETHERNET_II
2. FRAME: specifies which frame type is used by the driver. Accepted
values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and
Ethernet_SNAP. Multiple frame types can be enabled by the
driver by loading the same driver with different FRAME types
Ex: LOAD CNP200 FRAME=ETHERNET_802.2
LOAD CNP200 FRAME=ETHERNET_802.3
LOAD CNP200 FRAME=ETHERNET_II
LOAD CNP200 FRAME=ETHERNET_SNAP
3. NODE: Use a different address to replace the node address burned
in EEPROM.
Ex: LOAD CNP200 NODE=0200E8001122
4. There are five parameters provided for specifying adapter's speed and
duplex mode : AUTO, 10-HD, 10-FD, 100-HD and 100-FD.
Ex: LOAD CNP200 100-HD FRAME=Ethernet_802.2 NAME=LAN_A
BIND IPX TO LAN_A NET=11
** All trademarks and brand names mentioned belong to their respective
owners.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.