CNPower200 10/100Mbps PCI Fast Ethernet Adapter NDIS 2 Driver For LAN Manager Installation Guide
************************************************************************************************
The NIC drivers in the Mslanman.dos diectory conform to the Network Driver Interface Specification (NDIS) 2.0 as defined by Microsoft/3Com.
NDIS 2 Driver Installation on LAN Manager v2.0
==============================================
1. Type "Setup" in the LAN Manager directory and press Enter.
2. Choose "Import Network Drivers..." in the "Action" field.
Press <Enter> to continue.
3. Insert your Driver Diskette into either drive A: or B:
then press <Enter> to see the list of Imported Network
Drivers on the screen.
4. Press the <Space> Bar to select the appropriate Network Adapter
(i.e. "CNPower200 10/100Mbps PCI Fast Ethernet Adapter"), then
press <Enter> to confirm your choice.
5. Follow screen instructions to complete the process, until the Network
Driver appears on screen.
6. If asked Identify your Network Adapter. For example, select
"CNPower200 10/100Mbps PCI Fast Ethernet Adapter" to confirm any Ethernet Adapter.
7. Select the <Add driver> and the <Add protocol> options. Then select
<OK> to confirm your choices. The Workstation's primary parameters
should appear on screen.
8. Respond to all prompts issued on screen to complete the process.
Select <OK> to confirm a choice.
9. Save all selections. Choose "Save" from the "Action Menu".
10. Press <F3> to exit.
NDIS 2 Driver Installation on LAN Manager v2.1
==============================================
1. Type "lmsetup" in the LAN Manager directory and press <Enter>. The
Microsoft LAN Manager Setup screen should appear.
2. Choose "Network Drivers..." in the "Configuration" field. Press <Enter>
to confirm your choice.
3. Choose <Add New Configs> and press <Enter> to display a list of Network
Adapter Drivers.
4. Choose <Other Driver> and press <Enter>.
5. Insert the Driver Diskette into drive A: or B: of your PC. Specify the
drive location of the diskette and select <OK> to proceed.
6. Select the appropriate Network Adapter Driver from the list. For
example, select "CNPower200 10/100Mbps PCI Fast Ethernet Adapter",
Select <OK> to confirm your choice.
7. Select an appropriate protocol. Use the <Space> bar to highlight your
choice.
8. Select <OK> to confirm your choice. A Configuration Complete message
should appear on screen.
9. Save the configuration. Select <Save>.
10. Press <F3> to exit.
NDIS 2 Driver Installation on LAN Manager v2.2
==============================================
1. Type "Setup" in the LAN Manager directory(i.e. C:\LANMAN.DOS) and press
<Enter>. The Microsoft LAN Manager Setup screen should appear.
2. Choose "Network Drivers" from the "Configuration" field. Press <Enter>
to confirm your choice.
3. Choose <Add New Config> and press <Enter> to display a list of Network
Adapter Drivers.
4. Insert the Driver Diskette into drive A: or B: of your PC. Specify the
drive location of the diskette.
5. Choose <Other Driver> and press <Enter>.
6. Select the appropriate Network Adapter Driver from the list.
For example, select "CNPower200 10/100Mbps PCI Fast Ethernet Adapter",
Select <OK> to confirm your choice.
7. Select an appropriate protocol. Use the <Space bar> to highlight your
choice. If you have chosen the TCP/IP protocol, you will be prompted to
key in the IP address, the subnet mask, and the default gateway
(router). By default, the workstation number of the NetBios session is
set to 6.
Please consult Microsoft LAN Manager Installation Manual for more
details, or check the online help.
8. Select <OK> to confirm your choice. A Configuration Complete message
should appear onscreen.
9. Save the configuration. Select <Save>.
10. Press <F3> to exit.
If you are installing the LAN Manager for the first time, you will be prompted
to key in the default user name and domain of the workstation, and to answer
the questions concerning the Windows environment and memory management. Just
follow the instructions on the screen.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.