**************************************************** * * * CNet CNF301 NDIS 2 Device Driver Installation * * * **************************************************** LAN Support Program 1.31 Driver =============================== INSTALLATION PROCEDURE 1) Insert CNet's CNF301 PC Card Ethernet adapter into your computer's Type II PC Card slot. 2) Connect the Media Coupler to the adapter's 15-pin connector. 3) Connect the network cable to the RJ-45 connector on the Media Coupler. (Refer to the User's Manual for exact instructions). 4) Copy A:\NDIS2\DOS\CNF301.DOS to a LAN Support Program directory. 10) Add DEVICE=C:\PATH\CNF301.DOS to the CONFIG.SYS file. 11) Modify the PROTOCOL.INI file under the LAN Support Program directory as follows: BINDINGS = CNF301 : : [CNF301] DRIVERNAME = CNF301$ IOBASE = 0X300 INTERRUPT = 5 12) Make sure the sequence of command lines in the C:\CONFIG.SYS file is similar to the example below: : : : [DEVICE=Socket Services command] [DEVICE=Card Services command] [DEVICE=resource manager] : : : DEVICE=C:\COPEN\COPEN.EXE /IO=xxx /IRQ=yy : : : DEVICE=C:\PATH\CNF301.DOS : : :Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.