1. cnf301a.zip Driver
2. LANTASTI.TXT File Contents

LANTASTI.TXT Driver File Contents (cnf301a.zip)

                      CNet CNF301 PCMCIA Fast Ethernet Adapter
                                   NDIS Driver 
                for LANtastic 5.0 / 6.0 / 7.0 Installation Guide
                ================================================ 


1. Installation Procedure for LANtastic 5.0
===========================================
For NDIS driver, there is the "CNF301.DOS" driver for the Ethernet adapter.
You can use "CNF301.DOS" driver to replace AEXNDIS.DOS which is the NDIS
driver offered by ARTISOFT.

   Example ----- CONFIG.SYS

     [DEVICE=Socket Services command]
     [DEVICE=Card Services command]
     [DEVICE=resource manager]
           :           :         :
     DEVICE=C:\COPEN\COPEN.EXE /IO=xxx /IRQ=yy
           :           :         :

     DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
     DEVICE=C:\LANTASTI\CNF301.DOS

   Example ----- AUTOEXEC.BAT / STARTNET.BAT

     C:\LANTASTI\AI-NDIS BIND_TO=CNF301_NIF
     C:\LANTASTI\AILANBIO
     C:\LANTASTI\REDIR MachineName

   Example ----- PROTOCOL.INI

     [PROTMAN]
       DRIVERNAME = PROTMAN$
       DYNAMIC = YES

     [CNF301_NIF]
       DRIVERNAME = CNF301$


2. Installation Procedure for LANtastic 6.0
===========================================
To install CNF301 NDIS driver "CNF301.DOS", you can use the LANtastic 6.0
install program, select "NDIS support for network adapters", insert the driver 
diskette, and type path "A:\NDIS20\DOS". The Install program will search for
"CNF301.DOS" and "PROTOCOL.INI" and copy these two files to the target
directory.

If you already installed LANtastic 6.0 and need to install the PCI Ethernet
Adapter, replace AEXNDIS.DOS with the NDIS driver "CNF301.DOS" at CONFIG.SYS
as below.

   "CNF301.DOS" is an NDIS driver of the adapter card.
   "AEXNDIS.DOS" is an NDIS driver which supported by ARTISOFT.

   Example ----- CONFIG.SYS
     [DEVICE=Socket Services command]
     [DEVICE=Card Services command]
     [DEVICE=resource manager]
           :           :         :
     DEVICE=C:\COPEN\COPEN.EXE /IO=xxx /IRQ=yy
           :           :         :

     DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
     DEVICE=C:\LANTASTI\CNF301.DOS

   Example ----- AUTOEXEC.BAT / STARTNET.BAT

     @echo ===== Begin LANtastic configuration =====
     SET LAN_CFG=C:\LANTASTI
     PATH C:\LANTASTI;%PATH%
     SET LAN_DIR=C:\LANTASTI.NET

     rem Please obtain the NETBEUI.EXE program from Microsoft
     NETBEUI
     AI-NDIS BIND_TO=AEXNDIS_NIF
     AILANBIO @STARTNET.CFG
     REDIR THOMAS @STARTNET.CFG

     SERVER C:\LANTASTI.NET @STARTNET.CFG
     NET LOGIN \\username
     @echo =====  End LANtastic configuration  =====

   Example ----- PROTOCOL.INI

     [PROTMAN]
      Priority=NETBEUI
      DriverName = PROTMAN$
      Dynamic = Yes

     [NETBEUI_XIF]
      DriverName = netbeui$
      Sessions = 6
      NCBS = 12
      Bindings = CNF301_NIF
      LANABASE = 1
    
     [CNF301_NIF]
      DRIVERNAME = CNF301$


3. Installation Procedure for LANtastic 7.0
===========================================

 1. Run Lantastic INSTALL program to install Lantastic and prepare to answer
    questions.

 2. When prompted for choosing a network adapter card, select "NDIS Support
    for non-Artisoft adapter".

 3. Insert this diskette into drive 'A'.
 
 4. Type "A:\NDIS2\DOS" under the "Enter NDIS driver directory" dialog box.

 5. (NDIS) string will appear in "Select Adapter" dialog box, then press OK.

 6. When "Summary" screen shows up, the "Network Adapter" line should be as
    follows. 

     (NDIS) "CNet CNF301 PCMCIA Fast Ethernet Adapter"

 7. Finish the rest installation steps.

 8. To start the network, execute the STARTNET.BAT batch file.