PRO120 100/10 Mbps PCI Bus Fast Ethernet Adapter Linux driver Installation Guide ========================================================== Installation Procedure ====================== 1. Log in into the root 2. In the Linux prompt, copy the tulip.c from the diskette A: and issue the command as below: #mcopy a:/Linux/tulip.c . 3. Compile the tulip.c to be a module as below: gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c tulip.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS` 4. Load the module, and issue the command as following: insmod tulip 5. Confirm the setting, such as: ifconfig eth0 192.72.53.23 route add default gw 192.72.53.1 netmask 0.0.0.0 metric 1 192.72.53.23 is the IP assigned by your administratorDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.