PRO120 100/10 Mbps PCI Bus Fast Ethernet Adapter
NetWare ODI Server Driver
for Netware 4.11 Installation Guide
================================================
A.) Installation Procedure
==========================
1. Insert the Driver Diskette into drive 'A' and check the contents of
sub-directory \NETWARE\SERVER.411, It should contain the following files:
MX32SODI.LAN Ä Novell NetWare V4.11 Server Driver.
MX32SODI.LDI Ä Novell NetWare V4.11 Server Driver Installation
Information File.
AUTOEXEC.NCF
README.TXT
2. At the NetWare prompt (indicated by the Server name), run the INSTALL.NLM
program by typing:
: LOAD INSTALL <Enter>
3. Select "Driver options (Load/Unload/...)" and then press <Enter>.
4. Select "Configure network drivers", and then press <Enter>.
5. Select "Load a driver", and then press <Enter>.
6. Press the <Ins> key to specify other drivers to install.
7. Press <F3>, specify the driver path (A:\NETWARE\SERVER.411), and then press
<Enter>.
8. The MX32SODI.LAN driver should appear in your choice list in the 'Select a
driver to install:' field. Choose this driver to start the driver loading
and binding procedure. This will allow you to load and bind all 4 frame
types supported by NetWare.
9. To complete the process, follow the instructions on the screen.
B.) Installation Notes
======================
1. You had better add the followings in the STARTUP.NCF:
Set Reserved Buffers Below 16 Meg 200
Set Maximum Physical Receive Packet Size = 1530
Set Minimum Packet Receive Buffers = 150
2. You may specify the line speed and mode type you need in the AUTOEXEC.NCF
file.
:LOAD [C:]\<PATHNAME>\MXICSERV FRAME=ETHERNET_802.3 [Speed/Mode Type]
<Enter>
If you do not specify the speed/mode type, the default is Auto-Negotiation.
Speed/Mode Types: 10HD ...... Force to 10Mbps & Half Duplex.
10FD ...... Force to 10Mbps & Full Duplex.
100HD ...... Force to 100Mbps & Half Duplex.
100FD ...... Force to 100Mbps & Full Duplex.
AUTOSENSE ...... Force to Auto-Negotiation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.