1. p120c.zip Driver
2. LANMAN.TXT File Contents

LANMAN.TXT Driver File Contents (p120c.zip)

   Driver Installation - for LAN Manager Workstation/Server

   (1) Introduction:
   ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ?
     This document describes the procedure to setup LAN Manager 2.1
     Workstation/Server driver for PRO120 100/10 Mbps PCI Bus Fast 
     Ethernet Adapters.


   (2) Location of Driver:
   ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ?
      (DOS) \NDIS2DOS\MXNICF.DOS
      (OS/2)\NDIS2OS2\MXNICF.OS2


   (3) Sample Configuration Files:
   ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ?
      %%% CONFIG.SYS (for DOS will contain) %%%
          DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS
          DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\MXNICF\MXNICF.DOS


      %%% CONFIG.SYS (for OS/2 will contain) %%%
          DEVICE=C:\LANMAN.OS2\DRIVERS\PROTMAN\PROTMAN.OS2 /I:C:\LANMAN.OS2
          DEVICE=C:\LANMAN.OS2\DRIVERS\ETHERNET\MXNICF\MXNICF.OS2


      %%% PROTOCOL.INI (will contain) %%%
         [MXNICF_NIF]
         ; PROTOCOL.INI SAMPLE

           DriverName = MXNICF$

           ;; Range: 0-7.
           ;; Usage: "Board=nn"
           ;------------------
           ; Board = 0

           ;; Options: NWAY, TX10, TX10FD, TX100, TX100FD.
           ;; Usage: "MEDIA_TYPE=xxx"
           ;-------------------------
           MEDIA_TYPE = NWAY


   (4) Setup Procedures:
   ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ?
      Before you start with the installation process, make sure that the
      adapter is properly installed and configured. Make sure your
      Microsoft LAN Manager is properly installed.

      1. Run the appropriate Microsoft LAN Manager SETUP for computer you
         are setting up.(DOS, OS/2 or OS/2 Server). Select "Configuration"
         item ,(the  adapter driver isn't included on the LAN Manager 
         disk) and insert the adapter driver diskette, select the item
         "PRO120 100/10 Mbps PCI Bus Fast Ethernet NDIS 2 MAC Driver" and follow
         the directions.

      2. When completed, reboot your computer .



How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.