PCI Fast Ethernet Adapters SCO OpenServer 5.0 MDI driver Installation Guide ==================================================================== Your Driver Diskette should contain the following files in the subdirectory \SCO-UNIX: -------------------------------------------------------------------- Files Contents -------------------------------------------------------------------- readme.txt Text file about driver installation for the SCO OpenServer 5.0. custom.dst PCI Fast Ethernet Adapters MDI driver package for SCO OpenServer 5.0. -------------------------------------------------------------------- A. Introduction. ---------------- This is a SCO OpenServer 5.0 MDI driver for the PCI Fast Ethernet Adapter whose released version is 1.0.0b. The MDI driver requires the following hardware and software: - The PCI Fast Ethernet Adapters. - SCO OpenServer 5.0 or above. B. Installation Procedure. -------------------------- 1. Prepare a formatted diskette on any DOS machine, and then copy the file 'custom.dst' to the subdirectory of the diskette. C>format a: A>mkdir sco C>copy custom.dst a:\sco 2. Now boot the SCO OpenServer 5.0 and enter the Maintenance mode. 3. The following sections describe the configuration of the driver. It is suggested that you should perform these instructions in the singler-user environment (maintenance mode). 3.1. Run "scoadmin" command, and then select the "Software Manager" item to install DMFE MDI driver to SCO OpenServer. After the "CNet PRO200 PCI Fast Ethernet Adapter" is shown, choose the "FULL" option to install this package. 3.2. Select "Network" to add the desired LAN adapter in the Maintenance Mode. The steps for adding the new LAN adapter are listed below: a. When the "Network Configuration Manager" is shown, please select "Add new LAN adapter" option under "Hardware" main item. b. When the screen "Add new LAN Adapter" is shown, then select the option "Configure hardware not listed above... ]". c. After "Select network adapter to be added:" is shown, please select the "PRO200 PCI Fast Ethernet Adapter" item to add the driver into the system. d. When the driver is added, the screen "Enter the configuration of the PRO200 PCI Fast Ethernet Adapter" will be shown, then please select "OK" item to finish this selection if you do not make any change for the "Advanced options... ]". e. When the driver is selected correctly, the "Add protocol" will be shown, then select the item "- SCO TCP/IP" as the default protocol stack. f. After finished the "TCP/IP" protocol sub-selection, then the success message is shown as following: "The following products were sucessfully configured into the system: SCO TCP/IP PRO200 PCI Fast Ethernet Adapter" g. When the adapter has been configured, select 'q' from the menu, and relink the kernel at the prompt. 4. To active the adapter, you must reboot. 5. If you encounter any problems during installation, (i.e., an error message appears on screen) call your dealer for assistance. Brand and product names are trademarks of their respective companies. ==End Of File==Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.