README.TXT Driver File Contents (pro200a.zip)

                     CNet PRO200 PCI Fast Ethernet Adapter
            NetWare 4.10 Server for ODI Driver Installation Guide
            =====================================================


Installation Procedure
======================
Before you start with the installation process, make sure that the Novell
NetWare V4.10 server is properly installed.
Similarly, your adapter should also be properly installed in your workstation.

 1. Insert the driver diskette into drive 'A' and check the contents of
    sub-directory \NETWARE\SERVER.410, It should contain the following files:

    DM9PCI.LAN    *  Novell NetWare V4.10 Server Driver.
    DM9PCI.LDI    *  Novell NetWare Server Driver Installation Information
                      File.
    MSM.NLM
    NBI.NLM
    ETHERTSM.NLM
    README.TXT

 2. Copy the above files into the NetWare sub-directory of your server.

     C:\COPY A:\NETWARE\SERVER.410\*.* C:\NWSERVER\*.*

 3. Run SERVER.EXE from your server. You will see a series of NetWare messages
    on the screen.

     C:\NWSERVER\SERVER.EXE

 4. Before loading the adapter driver, you must load MSM.NLM first and then 
    load ETHERTSM.NLM.

     :LOAD C:\NWSERVER\MSM.NLM. 
     :LOAD C:\NWSERVER\ETHERTSM.NLM

 5. At the NetWare prompt (indicated by the Server name), run the INSTALL.NLM
    program by typing:

     :LOAD INSTALL <Enter>

 6. The INSTALL program will prompt "NetWare Installation" windows on the 
    screen. 

 7. In the "Installation Options" windows to select "Driver options (Load/
    Unload/...)" and press <Enter>.

 8. Select "Configure network drivers", and then press <Enter>.

 9. Select "Load an additional driver", and then press <Enter>.

10. Press the <Ins> key to specify other drivers to install.

11. Press <F3>, specify the driver path (A:\NETWARE\SERVER.410),
    and then press <Enter>.

12. The "DM9PCI.LAN | CNet PRO200 PCI Fast Ethernet Adapter driver" should
    appear in your choice list for the "Select a driver" to install field and
    press <Enter>.

13. Choose this driver to start the driver loading and binding procedure. This 
    will allow you to load and bind all 4 frame types supported by NetWare
    server.

14. To complete the process, follow the instrctions on the screen.


Installation Notes
==================

 A. You had better add the followings in the STARTUP.NCF:

      Set reserved buffers below 16 meg 200
      Set maximum physical receive packet size = 1530
      Set minimum packet receive buffers = 150

 B. You may specify the line speed and mode type you need in the AUTOEXEC.NCF
    file.

      :LOAD [C:]\<Pathname>\DM9PCI FRAME=ETHERNET_802.3 [Speed/Mode Type]
    
    If you do not specify the Speed/Mode type, the default is AUTO-Negotiation
    (N-WAY).


   Speed/Duplex Types: 10HALF        ......      10Mbps Half Duplex
                       10FULL        ......      10Mbps Full Duplex
                       100HALF       ......     100Mbps Half Duplex
                       100FULL       ......     100Mbps Full Duplex
                       AUTODETECT    ......     Auto-Negotiation
              

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 2.08