LAN Manager Workstation/Server
Introduction:
-------------
This document describes the procedure to setup LAN Manager 2.1
Workstation/Server driver for Philips EtherTrans-110A Fast Ethernet
Adapter.
Location of Driver:(DOS) \MSLANMAN.DOS\DRIVERS\ETHERNET\RTL8129\RTFND.DOS
(OS/2)\MSLANMAN.OS2\DRIVERS\ETHERNET\RTL8129\RTFND.OS2
Sample Configuration Files:
---------------------------
CONFIG.SYS (for DOS will contain):
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\RTL8129\RTFND.DOS
CONFIG.SYS (for OS/2 will contain):
DEVICE=C:\LANMAN.OS2\DRIVERS\PROTMAN\PROTMAN.OS2 /I:C:\LANMAN.OS2
DEVICE=C:\LANMAN.OS2\DRIVERS\ETHERNET\RTL8129\RTFND.OS2
PROTOCOL.INI (will contain):
[RTL8129]
; PROTOCOL.INI SAMPLE
DriverName=RTFND$
EtherID=@52544C111111 ;This keyword is used to desinate a
;adapter by assigning its ethernet ID
;when more than one adapters exist on one
; system.
BusNo=@00 ;This keyword is used to desinate a
;adapter by assigning it's PCI bus number
;when more than one adapters exist on one
; system.(must be used with 'DeviceNo' keyword)
DeviceNo=@0A ;This keyword is used to desinate a
;adapter by assigning it's PCI Device number
;when more than one adapters exist on one
; system.(must be used with 'BusNo' keyword)
Speed= 100/10 ;This keyword is used to force adapter
;to speed 10M or 100M mode. If not present,
;the driver will auto-detect the speed.
Setup driver procedures on LAN Manager workstation/server :
-----------------------------------------------------------
Before you start with the installation process, make sure that the
adapter is properly installed and configured. Make sure your
Microsoft LAN Manager is properly installed.
1. Run the appropriate Microsoft Lan Manager SETUP for computer you
are setting up.(DOS, OS/2 or OS/2 Server). Select "Configuration"
item.
2. Select "Network Drivers" then insert the driver disk
to the A: or B:.
3. Select "Other Driver", input A:\ or B:\ then select
"Philips EtherTrans-110A Fast Ethernet Aadapter" and follow the
directions.
4. When completed, reboot your computer.
Installing Multiple LAN Adapters :
----------------------------------
To Follow Setup driver Procedure and add two adapter,
Under DOS mode, you can modify the EtherID or BusNo+DeviceNo
Keyword field in file C:\LANMAN\PROTOCOL.INI.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.