[Version] signature="$CHICAGO$" Class=MEDIA ClassGUID={4d36e96c-e325-11ce-bfc1-08002be10318} Provider=%GLI% DriverVer=04/10/2007, 1.9.0.0 CatalogFile.ntx86=bdacap.cat [ControlFlags] ExcludeFromSelect=* [SourceDisksNames] 1="driver1003_1",,,"" [SourceDisksFiles] bdacap.sys=1 IRKEYMAP_1.SET=1 ;--------------------------------------------------------------------------- ; Manual "Right-Click" Installation ;--------------------------------------------------------------------------- [DefaultInstall] ; This section is used for manual device installation. ; ; The device to be installed by right-clicking the INF and ; selecting the Install option. ; needs=bdacap.Installation [bdacap.Installation] ; This section is used for manual device installation. ; CopyFiles=bdacap.inf.CopyFiles AddReg=bdacap.RunOnce.AddReg [bdacap.inf.CopyFiles] ; This section is used for manual device installation. ; bdacap.inf [bdacap.RunOnce.AddReg] ; This section is used for manual device installation. ; HKLM,%RunOnce%,"bdacap.Capture",,"rundll32.exe streamci,StreamingDeviceSetup %BdaSWCapture.DeviceId%,%KSSTRING_BdaSWCaptureFilter%,%KSCATEGORY_BDARECEIVER%,%01%\bdacap.inf,bdacap.Filter.AddReg" ;--------------------------------------------------------------------------- ; PnP Installation ;--------------------------------------------------------------------------- [DestinationDirs] bdacap.CopyFiles=10,system32\drivers bdacap.inf.CopyFiles=17 [Manufacturer] %GLI%=Genesyslogic [Genesyslogic] %BdaSWCapture.DeviceDesc%=bdacap,USB\VID_05E3&PID_0504&MI_00 [bdacap] ; The Include and Needs lines cause the installation support devices ; and registration of required DShow categories. ; ; NOTE! If there is not a separate capture filter then the tuner ; INF should contain these lines. ; Include = ks.inf, kscaptur.inf, bda.inf Needs = KS.Registration, KSCAPTUR.Registration, BDA.Installation AddReg=bdacap.AddReg,AW_ATSC_S1409_M5005.AddReg CopyFiles=bdacap.CopyFiles [bdacap.NT] ; The Include and Needs lines cause the installation support devices ; and registration of required DShow categories. ; ; NOTE! If there is not a separate capture filter then the tuner ; INF should contain these lines. ; Include = ks.inf, kscaptur.inf, bda.inf Needs = KS.Registration, KSCAPTUR.Registration.NT, BDA.Installation.NT AddReg=bdacap.AddReg,AW_ATSC_S1409_M5005.AddReg CopyFiles=bdacap.CopyFiles [bdacap.AddReg] HKR,,DevLoader,,*NTKERN HKR,,NTMPDriver,,bdacap.sys [AW_ATSC_S1409_M5005.AddReg] HKR,"DriverData","DefaultBandwidth", 0x00010001, 0x06 HKR,"DriverData","I2CSlaveAddress", 0x00010001, 0x32 HKR,"DriverData","TunerVendor", 0x00010001, 0x00 ;ATSC->DVBC : 0xFF HKR,"DriverData","DemodulModel", 0x00010001, 0x00 ;QAM mode : 64/256 HKR,"DriverData","TunerModel" , 0x00010001, 0x00 ;khz HKR,"DriverData","TunerType", 0x00010001, 0x11 ;AW_S1409_M5005 HKR,"DriverData","USBRuningMode", 0x00010001, 0x1C HKR,"DriverData","USBRuningMode2", 0x00010001, 0x00 HKR,"DriverData","TimerSet1", 0x00010001, 0x00 HKR,"DriverData","TimerSet2", 0x00010001, 0x00 HKR,"DriverData","IRTableFileName", 0x0010000, %12%\IRKEYMAP_1.SET [bdacap.CopyFiles] bdacap.sys IRKEYMAP_1.SET [bdacap.Interfaces] ; Add an interface for each type of filter exposed by this device driver. ; The format of each line is as follows ; ; AddInterface = DSHOW_CATEGORY, FILTER_REFERENCE_GUID, INSTALLATION_SECTION ; ; DSHOW_CATEGORY is the GUID for the Direct Show category in which the ; filter should appear. A filter that appears in multiple categories should ; have a line for each category. ; ; FILTER_REFERENC_GUID should be the same as the ReferenceGuid in the ; the KSFILTER_DESCRIPTOR for the filter. ; ; INSTALLATION_SECTION specifies the section that the installer should call ; to add the ring 3 filter class to the registry. Except for legacy analog ; tuner and crossbar, all BDA filters should specify KSProxy as the ring 3 ; filter class. ; AddInterface = %KSCATEGORY_BDARECEIVER%, %KSSTRING_BdaSWCaptureFilter%, bdacap.Filter AddInterface = %KSCATEGORY_BDASOURCE%, %KSSTRING_BdaSWTunerFilter%, BdaTuner.Filter AddInterface = %KSCATEGORY_BDASOURCE%, %KSSTRING_BdaSWTunerFilter2%, BdaTuner.Filter2 [bdacap.NT.Interfaces] ; Add an interface for each type of filter exposed by this device driver. ; The format of each line is as follows ; ; AddInterface = DSHOW_CATEGORY, FILTER_REFERENCE_GUID, INSTALLATION_SECTION ; ; DSHOW_CATEGORY is the GUID for the Direct Show category in which the ; filter should appear. A filter that appears in multiple categories should ; have a line for each category. ; ; FILTER_REFERENC_GUID should be the same as the ReferenceGuid in the ; the KSFILTER_DESCRIPTOR for the filter. ; ; INSTALLATION_SECTION specifies the section that the installer should call ; to add the ring 3 filter class to the registry. Except for legacy analog ; tuner and crossbar, all BDA filters should specify KSProxy as the ring 3 ; filter class. ; AddInterface = %KSCATEGORY_BDARECEIVER%, %KSSTRING_BdaSWCaptureFilter%, bdacap.Filter ;AddInterface = %KSCATEGORY_BDASOURCE%, %KSSTRING_BdaSWTunerFilter%, BdaTuner.Filter AddInterface = %KSCATEGORY_BDATUNER%, %KSSTRING_BdaSWTunerFilter%, BdaTuner.Filter AddInterface = %KSCATEGORY_BDATUNER%, %KSSTRING_BdaSWTunerFilter2%, BdaTuner.Filter2 [bdacap.Filter] ; This is the install section for the sample BDA capture filter. ; AddReg = bdacap.Filter.AddReg [bdacap.Filter.AddReg] ; The sample BDA digital capture driver uses KSProxy for its ring 3 filter class. ; HKR,,CLSID,,%Proxy.CLSID% HKR,,FriendlyName,,%BdaSWCapture.FilterDesc% [BdaTuner.Filter] ; This is the install section for the sample BDA digital tuner filter. ; AddReg = BdaTuner.Filter.AddReg [BdaTuner.Filter.AddReg] ; The sample BDA digital tuner uses KSProxy for its ring 3 filter class. ; HKR,,CLSID,,%Proxy.CLSID% HKR,,FriendlyName,,%BdaTuner.FilterDesc% [BdaTuner.Filter2] ; This is the install section for the sample BDA digital tuner filter. ; AddReg = BdaTuner.Filter.AddReg2 [BdaTuner.Filter.AddReg2] ; The sample BDA digital tuner uses KSProxy for its ring 3 filter class. ; HKR,,CLSID,,%Proxy.CLSID% HKR,,FriendlyName,,%BdaTuner.FilterDesc2% [bdacap.NT.Services] ; Add the NT service. This causes the driver to be loaded on NT based systems. ; AddService=bdacap, 0x00000002, bdacap.ServiceInstall [bdacap.ServiceInstall] DisplayName=%BdaSWCapture.DeviceDesc% ServiceType=%SERVICE_KERNEL_DRIVER% StartType=%SERVICE_DEMAND_START% ErrorControl=%SERVICE_ERROR_NORMAL% ServiceBinary=%10%\system32\drivers\bdacap.sys LoadOrderGroup=ExtendedBase [Strings] SERVICE_KERNEL_DRIVER=1 SERVICE_DEMAND_START=3 SERVICE_ERROR_NORMAL=1 REG_EXPAND_SZ=0x00020000 REG_DWORD=0x00010001 RunOnce="SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce" ; Specify the GUID for the Ksproxy plugin.. ; Proxy.CLSID="{17CCA71B-ECD7-11D0-B908-00A0C9223196}" ; Specify the GUID for the BDA Receiver Filters category in GraphEdit. ; KSCATEGORY_BDARECEIVER="{FD0A5AF4-B41D-11d2-9C95-00C04F7971E0}" ; Specify the GUID for the BDA Source Filters category in GraphEdit. ; KSCATEGORY_BDATUNER="{71985F48-1CA1-11d3-9CC8-00C04F7971E0}" ; Specify the GUID for the capture device's SW PnP ID ; BdaSWCapture.DeviceId="{AA7F4F0A-A95B-42d1-B9DD-EE3AC9AB39A8}" ; Specify the GUID for the tuner device's SW PnP ID ; BdaSWTuner.DeviceId="{828B00F0-9A04-4692-8573-535B05DFF3F4}" ; Specify the GUID for the digital capture Filter. ; ; NOTE! This must match the reference guid specified in the driver's filter ; descriptor. ; KSSTRING_BdaSWCaptureFilter="{074649FE-2DD8-4c12-8A23-BD828BADFFFA}" KSSTRING_BdaSWTunerFilter="{3CE6374B-32B4-4bac-9CEB-D7EB76C271C4}";"{91B0CC87-9905-4d65-A0D1-5861C6F22CBF}" KSSTRING_BdaSWTunerFilter2="{E4265A96-40CA-48a8-A1C7-D10FC60978AD}" ; Specify the GUID for WDM capture devices. ; A legacy analog capture filter would belong to this category. ; KSCATEGORY_CAPTURE="{65E8773D-8F56-11D0-A3B9-00A0C9223196}" ;---------------- ; localizeable ;---------------- GLI="Genesyslogic" BdaSWCapture.FilterDesc="Genesyslogic DTV Filter" BdaSWCapture.DeviceDesc="Genesyslogic DTV Device" BdaTuner.FilterDesc="Genesyslogic ATSC Tuner Filter" BdaTuner.FilterDesc2="Genesyslogic DVBC Tuner Filter" BdaTuner.FriendlyName="Genesyslogic BDA Tuner"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.