1. v95v263.zip Driver
2. AODI.TXT File Contents

AODI.TXT Driver File Contents (v95v263.zip)

Please follow the step below to setup AODI parameter

1. Install ISDN driver into Win98 (If you want to use Win95, please upgrade
   your Dial-up Networking to Version 1.3)
2. Open Start->Setting->Control Panel->System->Device
   Manager->ISDNLink->ISDNLink PC Adapter->Setting.
3. Please Press "X.25/AODI" button.
4. Check X.25 D-channel item and select TEI value (The TEI value is depend on
   your switch provider)
5. If your server support callback function, please check CallBack Enable item.
   When you check this item, please keyin your ISDN Subscriber Number
   also.
6. Please enter your X.25 Local address.
7. Enter LCN number into X.25 Lowest LCN number field. (This LCN number is
   depend on your X.25 switch)
8. Press OK button on all previous window to exit setting.
9. Windows will ask you to re-boot system and you have to re-boot the system.

Please follow the step below to create a modem for AODI

1. Create a new modem from Start->Setting->Control Panel->Modem.
2. Please don't use auto-scan to find modem and you should select on from modem
   list.
3. On modem list you can select any standard modem (ex. Standard 28800 modem,
   Standard 33600 modem....)
4. Enter ATB80 into Extra setting of Modem Properties.

Please follow the step below to make a Dial-up Networking icon

1. Please make a new DUN connection.
2. Select a device from list. This device is made by you before.
3. Enter your X.25 remote address into the field of Telephone number.
4. After you make a new DUN connection, please change your Microsoft IE to use
this DUN    connection.

You can double-click on this new DUN connection to make an X.25 call for AODI.
This connection will always on until you disconnect it. When you open Microsoft
IE, the PPP data will send into D-channel and B-channel will be added depend on
throughput.

Additional AT-command for throughput setting is follow:

ATS55=nn      nn is percentage of data-flow for increase B-channel. The value
              is from 1% ~ 100%. The default value is 50%.
ATS56=nn      nn is time duration of high data-flow for increase B-channel. The
              value is from 1 sec. ~ 1200 sec. The default value is 10 sec.
ATS57=nn      nn is percentage of data-flow for decrease B-channel. The value
              is from 1% ~ 100%. The default value is 50%.
ATS58=nn      nn is time duration of low data-flow for decrease B-channel. The
              value is from 1 sec. ~ 1200 sec. The default value is 60 sec.

You can also enter those AT-commands into Extra Setting of Modem Properties.