1. ht-2005ct.zip Driver
2. MSCLIENT.TXT File Contents

MSCLIENT.TXT Driver File Contents (ht-2005ct.zip)

Ether Support Publishing       \NDIS\MSCLIENT.TXT

            Ether SN2000 Ethernet Adapter Installation
                   for Microsoft Network Client 3.0 for MS-DOS

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

 [Method 1]:

       Execute SETUP.EXE from Microsoft Network Client for DOS release
        diskette.

       Specify the <target path> which Microsoft Network Client for DOS
        files will been copy.

       Select "Network adapter not shown on list below ...".

       Please specify the location (path, C:\NDISDOS) of the OEM driver
        you want to use, press <Enter>.

       Select "Ether SN2000 Ethernet adapter".

       Select "Change Network Configuration", "Add Protocol" as you want.

       Follow  screen  instructions  to  complete  the  process. Simply
         pressing <Enter> for each screen display will select the default
         options. Press <Enter> until you reach the display prompting you
         to reboot your system.

 [Method 2]:

       Please Change to the Microsoft Network Client subdirectory,
        and run SETUP.EXE. (default directory is C:\NET)

       The screen will display some information. Press <Enter> .

       Responds to the screen prompts, selecting "Change Network
         Configuration",then press <Enter>.

       Move the highlight to "Add Adapter", press <Enter>.

       Select "Network adapter not shown on list below ...".

       Please specify the location (path, C:\NDISDOS) of the OEM driver
        you want to use, press <Enter>.

       Select "Add Protocol" as you want.

       Follow  screen  instructions  to  complete  the  process. Simply
         pressing <Enter> for each screen display will select the default
         options. Press <Enter> until you reach the display prompting you
         to reboot your system.

   Sample Configuration Files:
    ---------------------------
      PROTOCOL.INI (install will creates this file)

          [network.setup]
          version=0x3110
          netcard=SN2000,1,SN2000,1
          transport=ms$ndishlp,MS$NDISHLP
          transport=ms$netbeui,MS$NETBEUI
          lana0=SN2000,1,ms$netbeui
          lana1=SN2000,1,ms$ndishlp

          [protman]
          DriverName=PROTMAN$
          PRIORITY=MS$NDISHLP

          [MS$NDISHLP]
          DriverName=ndishlp$
          BINDINGS=SN2000

          [MS$NETBEUI]
          DriverName=netbeui$
          SESSIONS=10
          NCBS=12
          BINDINGS=SN2000
          LANABASE=0

          [SN2000]
          DriverName=SN2000$
          MEDIA=AUTODETECT
          EARLYTX=OFF
          SEARCH_ALL_CARD=OFF