; ; $RCSfile: ss.inf,v $ $Revision: 1.18.8.4 $ ; [Version] Signature="$CHICAGO$" Provider=%MS% ClassGUID={4d36e971-e325-11ce-bfc1-08002be10318} Class=Net ;******************************************************************************* [Manufacturer] %V_ENI%=ENI_devices ; PNP cards should be excluded from select [ControlFlags] ExcludeFromSelect = PCI\VEN_111A&VEN_111A&DEV_0003&SUBSYS_0000111A&REV_00 \ PCI\VEN_111A&DEV_0005&DEV_0005&SUBSYS_0001111A&REV_00 [ENI_devices] ; These are the device ID's supported by this inf %PCI\VEN_111A&DEV_0003&SUBSYS_0000111A.DeviceDesc%=ENI-25p.ndi,PCI\VEN_111A&DEV_0003&SUBSYS_0000111A %PCI\VEN_111A&DEV_0005&SUBSYS_0001111A.DeviceDesc%=3010.ndi,PCI\VEN_111A&DEV_0005&SUBSYS_0001111A %PCI\VEN_111A&DEV_0005&SUBSYS_0101111A.DeviceDesc%=3010-2.ndi,PCI\VEN_111A&DEV_0005&SUBSYS_0101111A [SourceDisksNames] ; disk#="disk description",disk-label,disk-serial-number 1=%DiskName%,,0 [SourceDisksFiles] ; filename=disk#[,subdir] en10c.vxd=1 en10cc16.dll=1 en10c.hlp=1 en10ccfg.exe=1 en10cevt.dll=1 en10cmsg.vxd=1 en10cmsg.exe=1 en10cdtc.vxd=1 en10ctb.exe=1 en10ccpl.cpl=1 en10ccdi.dll=1 ;******************************************************************************* ; Run when the user picks the device out of the list [ENI-25p.ndi] MaxInstance=4 AddReg=ENI-25p.ndi.reg,ENI.ndi.reg DeviceID=PCI\VEN_111A&DEV_0003&SUBSYS_0000111A CopyFiles=ENI.CopyFiles.Dll,ENI.CopyFiles.Inf,ENI.CopyFiles,ENI.CopyFiles.Hlp,EN10C.CopyFiles.ACF, ENI.CopyFiles.Shared [3010.ndi] MaxInstance=4 AddReg=3010.ndi.reg,ENI.ndi.reg DeviceID=PCI\VEN_111A&DEV_0005&SUBSYS_0001111A CopyFiles=ENI.CopyFiles.Dll,ENI.CopyFiles.Inf,ENI.CopyFiles,ENI.CopyFiles.Hlp,EN10C.CopyFiles.ACF, ENI.CopyFiles.Shared [3010-2.ndi] MaxInstance=4 AddReg=3010-2.ndi.reg,ENI.ndi.reg DeviceID=PCI\VEN_111A&DEV_0005&SUBSYS_0101111A CopyFiles=ENI.CopyFiles.Dll,ENI.CopyFiles.Inf,ENI.CopyFiles,ENI.CopyFiles.Hlp,EN10C.CopyFiles.ACF, ENI.CopyFiles.Shared [ENI.Install] ; Run when user accepts the install AddReg=ENI.Install.reg ;******************************************************************************* [ENI.ndi.reg] ; NDIS Info HKR,NDIS,LogDriverName,,"EN10C" HKR,NDIS,MajorNdisVersion,HEX,03 HKR,NDIS,MinorNdisVersion,HEX,0A ; Interfaces HKR,Ndi\Interfaces,DefUpper,,"ndis3" HKR,Ndi\Interfaces,DefLower,,"ethernet" HKR,Ndi\Interfaces,UpperRange,,"ndis3" HKR,Ndi\Interfaces,LowerRange,,"ethernet" ; Install sections HKR,Ndi\Install,ndis3,,"ENI.Install" ;HKR,Ndi\Remove,,,"ENI.Remove" HKR,Ndi,NdiInstaller,,"EN10CC16.DLL,NdiProc" HKR,Ndi,HelpText,,%ENI_Help% HKR,,EnumPropPages,,"netdi.dll,EnumPropPages" ;Connected PC HKR,Ncdi,ReqFunction,,"ncdi_request" HKR,Ncdi,VerFunction,,"ncdi_version" HKR,Ncdi,DllName,,en10ccdi.dll ; Port Hive HKLM,System\CurrentControlSet\Services\VxD\EN10C,ProductName,,"SpeedStream 3010 CIP/1483" HKLM,System\CurrentControlSet\Services\VxD\EN10C,ProductVersion,,"1.2.0" HKLM,System\CurrentControlSet\Services\VxD\EN10C,ProductBuild,,"(9)" HKLM,System\CurrentControlSet\Services\VxD\EN10C,PartNumber,,"004-3010-003" HKLM,System\CurrentControlSet\Services\VxD\EN10C,Signature,,"EN10C" [ENI-25p.ndi.reg] HKR,Ndi,DeviceID,,"PCI\VEN_111A&DEV_0003&SUBSYS_0000111A" HKR,,SubsysId,,0 HKLM,System\CurrentControlSet\Services\VxD\EN10C,HWDescription ,,"Efficient Networks ENI-25p (PCI Bus 25.6 Mbps 4B/5B UTP-3 Adapter)" [3010.ndi.reg] HKR,Ndi,DeviceID,,"PCI\VEN_111A&DEV_0005&SUBSYS_0001111A" HKR,,SubsysId,,1 HKLM,System\CurrentControlSet\Services\VxD\EN10C,HWDescription ,,"Efficient Networks 3010 (PCI Bus 25.6 Mbps 4B/5B UTP-3 Adapter)" [3010-2.ndi.reg] HKR,Ndi,DeviceID,,"PCI\VEN_111A&DEV_0005&SUBSYS_0101111A" HKR,,SubsysId,,0x101 HKLM,System\CurrentControlSet\Services\VxD\EN10C,HWDescription ,,"Efficient Networks 3010 (PCI Bus 25.6 Mbps 4B/5B UTP-3 Adapter)" [ENI.Install.reg] HKR,,DevLoader,,*ndis HKR,,DeviceVxDs,,EN10C.vxd HKLM,"SOFTWARE\Efficient Networks\SpeedStream Adapter Software for ATM 25.6\1.2.0",build,,(9) HKR,,,,"EN10C" [ENI.CopyFiles.Dll] EN10CC16.DLL [ENI.CopyFiles] en10c.vxd en10ccfg.exe en10ctb.exe en10ccpl.cpl en10cevt.dll en10cmsg.vxd en10cmsg.exe en10cdtc.vxd en10ccdi.dll [ENI.CopyFiles.Inf] en10c.inf [ENI.CopyFiles.Hlp] en10c.hlp [ENI.CopyFiles.Shared] MFC42.DLL,,,32 MSVCRT.DLL,,,32 EN10CSS.DLL,,,32 [DestinationDirs] DefaultDestDir=11 ; system directory ENI.CopyFiles.Inf=17 ; inf directory ENI.CopyFiles.Hlp=18 ; help directory EN10C.CopyFiles.ACF=11, ACF\EN10C ; ACF directory ;******************************************************************************* ;The following section is used to get versioning information about the ; INF file itself. Use GetPrivateProfileString() to get this information. ;******************************************************************************* [StringVersionInfo] CompanyName=Efficient Networks, Inc. FileDescription=Windows 95 INF installation file FileVersion=$Revision: 1.18.8.4 $ ProductName=SpeedStream 3010 CIP/1483 ProductVersion=1.2.0 EmailSupport=support@efficient.com HotLineSupport=(972) 991-3889 PartNumber=004-3010-003 LegalCopyright=Copyright (C) Efficient Networks, Inc. 1998 Signature=EN10C ProductBuild=(9) ;******************************************************************************* [Strings] MS="Microsoft" V_ENI="Efficient Networks" DiskName="Efficient SpeedStream Driver Diskette" PCI\VEN_111A&DEV_0003&SUBSYS_0000111A.DeviceDesc="Efficient Networks ENI-25p SpeedStream Adapter" PCI\VEN_111A&DEV_0005&SUBSYS_0001111A.DeviceDesc="Efficient Networks 3010 SpeedStream Adapter" PCI\VEN_111A&DEV_0005&SUBSYS_0101111A.DeviceDesc="Efficient Networks 3010 SpeedStream Adapter" ENI_Help="The Efficient Networks adapter driver enables your network components to use a high speed ADSL network." [EN10C.CopyFiles.ACF] 3010CIP.ACFDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.