;; EPICISA.inf
;; ********* PLEASE READ ***********
;; The wizard cannot create exact INF files for all buses and device types.
;; You may have to make changes to this file in order to get your device to
;; install. In particular, hardware IDs and logical configurations require
;; intervention.
;;
;; The Win2K DDK documentation contains an excellent INF reference.
;--------- Version Section ---------------------------------------------------
[Version]
Signature="$CHICAGO$"
Provider=%ProviderName%
; If device fits one of the standard classes, use the name and GUID here,
; otherwise create your own device class and GUID as this example shows.
Class=NewDeviceClass
ClassGUID={ff646f80-8def-11d2-9449-00105a075f6b}
;--------- SourceDiskNames and SourceDiskFiles Section -----------------------
; These sections identify source disks and files for installation. They are
; shown here as an example, but commented out.
;[SourceDisksNames]
;1 = "Install Disk",Disk1,,
;[SourceDisksFiles]
;EPICISA.sys = 1,,
;--------- ClassInstall/ClassInstall32 Section -------------------------------
; Not necessary if using a standard class
; 9X Style
[ClassInstall]
Addreg=Class_AddReg
; NT Style
[ClassInstall32]
Addreg=Class_AddReg
[Class_AddReg]
HKR,,,,%DeviceClassName%
HKR,,Icon,,"-18"
;--------- DestinationDirs Section -------------------------------------------
[DestinationDirs]
EPICISA_Files_Driver = 10,System32\Drivers
;--------- Manufacturer and Models Sections ----------------------------------
[Manufacturer]
%MfgName%=Mfg0
[Mfg0]
%DeviceDesc%=EPICISA_DDI, R&R Electronics EPICISA driver
;---------- DDInstall Sections -----------------------------------------------
; --------- Windows 9X -----------------
; Experimentation has shown that DDInstall root names greater than 19 characters
; cause problems in Windows 98
[EPICISA_DDI]
CopyFiles=EPICISA_Files_Driver
AddReg=EPICISA_9X_AddReg
LogConfig=EPICISA_Config
[EPICISA_9X_AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,EPICISA.sys
HKR, "Parameters", "BreakOnEntry", 0x00010001, 0
; --------- Windows NT -----------------
[EPICISA_DDI.NT]
CopyFiles=EPICISA_Files_Driver
AddReg=EPICISA_NT_AddReg
LogConfig=EPICISA_Config
[EPICISA_DDI.NT.Services]
Addservice = EPICISA, 0x00000002, EPICISA_AddService
[EPICISA_AddService]
DisplayName = %SvcDesc%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %10%\System32\Drivers\EPICISA.sys
[EPICISA_NT_AddReg]
HKLM, "System\CurrentControlSet\Services\EPICISA\Parameters",\
"BreakOnEntry", 0x00010001, 0
; ------ Logical Config (common) -------
[EPICISA_Config]
; This is the logical configuration for the device. If the device has no
; hardware resources, you can remove this section, and remove the reference
; to it in section [EPICISA_Device]
;
ConfigPriority=HARDRECONFIG
; The allowed values for ConfigPriority are:
; HARDWIRED Cannot be reset in any way
; DESIRED Soft Configurable most optimal
; NORMAL Soft Configured medium optimal
; SUBOPTIMAL Soft Configured least optimal
; DISABLED Hardware disabled
; RESTART Requires Windows restart to affect
; REBOOT Requires system reboot to affect
; POWEROFF Requires power cycle to affect
; HARDRECONFIG Requires Jumper setting
;
IOConfig=8@200-207%fff(3ff::) ; IoPortRange0;
IOConfig=10@280-28F%fff(3ff::) ; IoPortRange1;
; --------- Files (common) -------------
[EPICISA_Files_Driver]
EPICISA.sys
;--------- Strings Section ---------------------------------------------------
[Strings]
ProviderName="R&R Electronics"
MfgName="R&R Electronics"
DeviceDesc="EPICD ISA Driver"
DeviceClassName="EPICD ISA"
SvcDesc="Description of NT service here"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.