Driver installation instructions for the Apricorn USB CF+ Reader Windows 98 and Windows 98 2nd Edition: Boot the operating system and insert the driver diskette into the floppy drive. Now plug the CF+ Reader into a USB port. The Hardware Installation Wizard will automatically run. Follow the directions in the wizard and make sure the Floppy disk drives box is checked. The wizard will automatically install the 1st driver. The Hardware Installation Wizard will now run again. Follow the directions and the wizard will automatically install the 2nd driver. The driver installation is now complete and the Apricorn CF+ Reader is ready for use. Insert a CompactFlash, CompactFlash+ or MicroDrive into the CF+ Reader and the media's contents will be accessible via a normal drive letter. This is usually the next available drive letter in the system, such as E:, after the hard drive and CD-ROM. Windows 2000 Professional: Boot the operating system and plug the reader into a USB port. The system will automatically install the USB Mass Storage Class driver. The driver installation may require re-booting the system. Mac OS 8.6: Drivers for USB Mass Storage Class devices can be downloaded from Apple. There are two types of driver sets. For Apple computers with plug-in USB cards: http://asu.info.apple.com/swupdates.nsf/artnum/n11543?OpenDocument For Apple computers with built-in USB: http://asu.info.apple.com/swupdates.nsf/artnum/n11418?OpenDocument Mac OS 9: The USB Mass Storage Class driver is already installed. ---------------------------------------------------------------------- Revision History: V. 2,1,0,0 8/7/00 Under Windows 98SE, updated support for suspend mode. V. 1,0,0,0 2/28/00 Initial ReleaseDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.