[Suomi]
PDREADME.TXT MATROX GRAPHICS INC. 2001.03.15
Matrox PowerDesk for Windows 2000
Huomautus: Tämä tiedosto voi sisältää viime hetken tietoja, joita
ei välttämättä ole käännetty sinun kielellesi. Pahoittelemme asiaa.
Sisällysluettelo
================
- Tämän version kuvaus
- Asennus
- Lisätietoja
- Huomautuksia, ongelmia ja rajoituksia
Tämän version kuvaus
====================
Matrox PowerDesk -ohjelmistoon kuuluu näytönohjain ja näytön
apuohjelmia. Tämän ohjelmiston avulla voit hyödyntää Matrox-
grafiikkalaitteiden aikkia ominaisuuksia ja käyttää muita Matroxin
näyttötoimintoja.
Asennus
=======
Voit asentaa Matrox PowerDesk -ohjelmiston käynnistämällä sen
mukana toimitetun asennusohjelman ja seuraamalla näyttöön tulevia
ohjeita.
Matrox PowerDesk -ohjelmisto asennetaan vain, jos tietokoneeseen on
asennettu sen tukema Matrox-grafiikkakortti.
Lisätietoja
===========
Voit katsoa lisätietoja Matrox PowerDesk-ohjelmistosta siihen
kuuluvasta ohjetiedostosta. Matrox-grafiikkakorttia koskevia
tietoja löydät grafiikkakortin tai tietokonejärjestelmän mukana
toimitetusta oppaasta.
Huomautuksia, ongelmia ja rajoituksia
=====================================
- DirectDraw-, Direct3D- ja DirectVideo-tuki
Toimittamamme DirectDraw-ohjain on yhteensopiva DirectX 2:n (tai
myöhempi) kanssa, ja se tukee Direct3D:tä. Jotta meidän
DirectDraw/Direct3D- ohjain kutsuttaisiin ja
laitteistokiihdytystä hyödynnettäisiin, Microsoft DirectX 2 (tai
myöhempi) ON oltava asennettuna, vaikka ohjelma olisikin
alunperin tehty DirectX 1:ä varten.
Jos uusi DirectX:n versio ei ole asennettuna, jotkin Matrox
PowerDesk -toiminnot eivät ehkä ole käytettävissä.
Toimitamme DirectX:n Matrox-CD-ROM:lla. Viimeisin DirectX on
saatavilla Microsoftin WWW-palvelimelta ja se sisältyy moniin
DirectX-ohjelmiin.
TÄRKEÄÄ: Jos DirectX-asennusohjelma pyytää sinua vaihtamaan
nykyiset näytönohjaimet, napsauta "Ei". Muuten asennusohjelma
asentaa näytönohjaimet, jotka eivät ole yhtä optimoituja kuin
Matrox-ohjaimet ja jotka eivät tue PowerDesk-ohjelmistoa.
Huomaa, että riippuen käyttämäsi Microsoft DirectX-ohjelman
alkuperästä, se ei välttämättä tue DirectVideota. Jotta Indeo-
ja Cinepak-AVI-tiedostot esitettäisiin nopeammin, sinun tulisi
asentaa Microsoft DirectVideon tuki.
- Matrox-väylänhallinta
Tämä ohjain tukee väylänhallintaa. Väylänhallinta on ominaisuus,
jonka avulla laajennuskortit voivat suorittaa tehtäviä
samanaikaisesti tietokoneen suorittimen kanssa. Jos käytössäsi on
nopea Pentium-tietokone (nopeampi kuin 166 MHz), useimpien
ohjelmien näyttökyky on parempi, kun väylänhallinta on käytössä.
Jotta voisit käyttää väylänhallintaa 3D-ohjelmien
(Direct3D/OpenGL) kanssa, grafiikkakortilla on oltava
keskeytyspyyntö (IRQ). Useimmat tietokoneet antavat
grafiikkakorteille IRQ:n automaattisesti, mutta kaikki eivät sitä
tee. Jos grafiikkakortillesi ei ole annettu IRQ:ta, Matrox-
väylänhallintaa käyttävät ohjelmat eivät ehkä toimi kunnolla.
Katso lisätietoja Matroxin tai tietokoneen ohjekirjasta.
- DirectDraw ja automaattinen virranhallinta
Kuten 30. syyskuuta 1995 julkaistuissa "Microsoft DirectX
tietoja" -tiedostossa mainitaan, DirectDraw-peli ei välttämättä
palaudu kunnolla, jos automaattiset virranhallintaohjelmat
keskeyttävät sen.
- Asennus Windows:n eri kieliversioissa
Jos asennat ohjelmiston, jonka kieli ei ole sama kuin
käyttöjärjestelmän kieli (esimerkiksi englanninkielisen
ohjelmiston japaninkieliseen järjestelmään), teksti ja
valintaikkunoiden ohjaimet voivat katketa sanojen keskeltä. Tämä
johtuu järjestelmän fonttien erilaisuudesta.
- OpenGL-tuki
Huomaa seuraavat rajoitukset, jotka koskevat Matrox-
näytönohjaimen mukana tulevaa OpenGL (3D) -ohjainta:
[English...]
- If you have a newer Matrox product or your Matrox software
was provided by the manufacturer of your computer, full
OpenGL support may be disabled with your Matrox display
driver. For a Matrox display driver with full OpenGL support
enabled, see the Matrox Web site (www.matrox.com/mga). (If
your Matrox product was provided by the manufacturer of your
computer, check the Web site of that manufacturer for a
display driver. A display driver provided by the manufacturer
of your computer is more likely to be tested with your
computer model.)
[...English]
- 3D Studio MAX 2.0:n käytön yhteydessä voi esiintyä
näyttöportin piirto-ongelmia. Jos näin tapahtuu, napsauta
näyttöporttia, jolloin sen näyttö päivittyy. Tämä ongelma ei
koske 3D Studio MAXin versioita 2.5 (tai myöhempi).
[English...]
- DualHead Multi-Display mode under Windows 2000
If you have a DualHead-supporting graphics card and you apply
"DualHead Multi-Display" mode under Windows 2000, this version of
Windows treats the main and secondary displays of a DualHead-
supporting graphics card as a single display (which the Matrox
display driver divides between two monitors). As a result, these
displays always use the same resolution and color palette
settings. Also, in your Windows desktop, the virtual positions of
these displays are always aligned next to each other.
While in DualHead Multi-Display mode with a computer monitor as
your secondary display, you can't adjust your secondary monitor
with the Windows "Monitor" or the Matrox PowerDesk "Monitor
Settings" property sheets. If your secondary monitor supports
Plug-and-Play (DDC), PowerDesk automatically uses the correct
maximum display resolution and refresh rate. If your secondary
monitor doesn't support Plug-and-Play, make sure that the correct
settings are selected under "Max. secondary resolution" on the
Matrox PowerDesk "DualHead" property sheet.
- Video playback with DualHead modes
If you have a a DualHead supporting graphics card and you're
using DualHead Multi-Display, Clone, or Zoom mode, digital video
may appear as a solid color on your secondary display. This can
happen if video is played using the hardware-overlay feature of
your Matrox graphics card. Video played using the overlay feature
is generally of higher quality but it can be viewed only on your
main display.
Because only one program at a time can use the overlay feature,
any other program started while the overlay feature is used won't
be able to use the feature. The overlay feature will be available
to the first program to start after the program currently using
the overlay is closed.
For video that normally uses the hardware-overlay feature, you
may be able to view the digital video on your secondary display
by running another instance of the video player. For example, if
you're viewing a file using the overlay feature with Microsoft
Media Player, double-clicking on the file again starts another
instance of the Media Player. This instance properly plays video
on your secondary display. Then, you could close the first
instance of the Media Player and still be able to view video on
your secondary display.
- DualHead DVDMax with a TV
While viewing video with a TV using the "DualHead DVDMax"
feature, you may notice occasionnal jerky video playback (dropped
frames) after playing a video for a few minutes. If you view
video playback with your computer monitor, this problem shouldn't
occur.
- 15-bit color palette support for Windows 2000
For advanced users: By default, the 15-bit color palette is
unavailable for Windows 2000. If you need to use this color
palette, you can make it available by adding the
"User.Enable15Bpp" value to your Windows registry and then
setting this value to "1". If you're adding this value, add it
under "HKEY_LOCAL_MACHINE" > "SYSTEM" > "CurrentControlSet" >
"Services" > "mgau" or "g200" or "g400" > "Device0". The value
type is "REG_DWORD".
[...English]
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.