1. win2k_537016.zip Driver
2. ReadEng.txt File Contents

ReadEng.txt Driver File Contents (win2k_537016.zip)

[English]
PDREADME.TXT                MATROX GRAPHICS INC.              2001.03.15

                   Matrox PowerDesk for Windows 2000
                             Revision 5.37.016


Contents
========

- Description of this release
- Installation
- More information
- Notes, problems, and limitations


Description of this release
===========================

Matrox PowerDesk software includes a display driver and display 
utilities. With this software, you can take full advantage of your 
Matrox graphics hardware and you can access additional Matrox 
display-related features.


Installation
============

To install Matrox PowerDesk, start the "setup" program included 
with it, then follow the on-screen instructions.

The setup program will only install software if a Matrox graphics 
card model supported by the setup program is installed in your 
computer.


More information
================

For more information on Matrox PowerDesk, see the help file 
included with it. For information specific to your Matrox 
graphics card, see your Matrox or system manual.


Notes, problems, and limitations
================================

- DirectDraw, Direct3D and DirectVideo support

  The DirectDraw driver we provide is compatible with DirectX 2 
  (or later) and includes Direct3D support. For our 
  DirectDraw/Direct3D driver to be called, and benefit from 
  hardware acceleration, Microsoft DirectX 2 (or later) MUST be 
  installed, even for programs originally made for DirectX 1.

  Also, if a recent version of DirectX isn't installed, some Matrox 
  PowerDesk features may not be available.

  We provide DirectX on the Matrox CD-ROM. The latest DirectX is 
  available from the Microsoft Web site, and is included with many 
  DirectX programs.

  IMPORTANT: If the DirectX setup program prompts you to replace 
  the existing display drivers, click "No". Otherwise, the setup 
  program installs display drivers which are not as optimized as 
  the Matrox drivers and which do not support PowerDesk software.

  Note that depending on the origin of your Microsoft DirectX 
  software, it may not include DirectVideo support. For faster 
  playback of Indeo and Cinepak AVI files, you should install 
  Microsoft DirectVideo support.

- Matrox bus mastering

  This driver supports bus mastering. Bus mastering is a feature 
  that allows expansion cards to perform tasks at the same time as 
  your computer's CPU. If you have a fast Pentium computer (faster 
  than 166 MHz), the display performance of most programs is 
  improved when bus mastering is used.

  To use bus mastering with 3D (Direct3D/OpenGL) programs, your 
  graphics card needs an interrupt request (IRQ). Most computers 
  automatically assign an IRQ to graphics cards, but some do not. 
  If your graphics card hasn't been assigned an IRQ, programs that 
  use Matrox bus mastering may not work properly. For more 
  information, see your Matrox or system manual.

- DirectDraw and Automatic Power Management

  As stated in "Microsoft DirectX Release Notes", September 30, 
  1995, a DirectDraw game may be unable to restore properly if it 
  is suspended by Automatic Power Management utilities.

- Installation in different language versions of Windows

  If you install software in a language different from the language 
  of your operating system (for example, English software on a 
  Japanese system), you may have problems with text and dialog box 
  controls being cut off. This is because of differences in system 
  fonts.

- OpenGL support

  Note the following limitations related to the OpenGL driver 
  included with Matrox PowerDesk:

    - If you have a newer Matrox product or your Matrox software 
      was provided by the manufacturer of your computer, full 
      OpenGL support may be disabled with your Matrox display 
      driver. For a Matrox display driver with full OpenGL support 
      enabled, see the Matrox Web site (www.matrox.com/mga). (If 
      your Matrox product was provided by the manufacturer of your 
      computer, check the Web site of that manufacturer for a 
      display driver. A display driver provided by the manufacturer 
      of your computer is more likely to be tested with your 
      computer model.)

    - Using 3D Studio MAX 2.0, you may experience problems with the 
      viewports being improperly redrawn. If this happens, simply 
      click in a viewport to properly update their display. This 
      problem isn't present with version 2.5 (or later) of 3D 
      Studio MAX.

- DualHead Multi-Display mode under Windows 2000

  If you have a DualHead-supporting graphics card and you apply 
  "DualHead Multi-Display" mode under Windows 2000, this version of 
  Windows treats the main and secondary displays of a DualHead-
  supporting graphics card as a single display (which the Matrox 
  display driver divides between two monitors). As a result, these 
  displays always use the same resolution and color palette 
  settings. Also, in your Windows desktop, the virtual positions of 
  these displays are always aligned next to each other.

  While in DualHead Multi-Display mode with a computer monitor as 
  your secondary display, you can't adjust your secondary monitor 
  with the Windows "Monitor" or the Matrox PowerDesk "Monitor 
  Settings" property sheets. If your secondary monitor supports 
  Plug-and-Play (DDC), PowerDesk automatically uses the correct 
  maximum display resolution and refresh rate. If your secondary 
  monitor doesn't support Plug-and-Play, make sure that the correct 
  settings are selected under "Max. secondary resolution" on the 
  Matrox PowerDesk "DualHead" property sheet.

- Video playback with DualHead modes

  If you have a a DualHead supporting graphics card and you're 
  using DualHead Multi-Display, Clone, or Zoom mode, digital video 
  may appear as a solid color on your secondary display. This can 
  happen if video is played using the hardware-overlay feature of 
  your Matrox graphics card. Video played using the overlay feature 
  is generally of higher quality but it can be viewed only on your 
  main display.

  Because only one program at a time can use the overlay feature, 
  any other program started while the overlay feature is used won't 
  be able to use the feature. The overlay feature will be available 
  to the first program to start after the program currently using 
  the overlay is closed.

  For video that normally uses the hardware-overlay feature, you 
  may be able to view the digital video on your secondary display 
  by running another instance of the video player. For example, if 
  you're viewing a file using the overlay feature with Microsoft 
  Media Player, double-clicking on the file again starts another 
  instance of the Media Player. This instance properly plays video 
  on your secondary display. Then, you could close the first 
  instance of the Media Player and still be able to view video on 
  your secondary display.

- DualHead DVDMax with a TV

  While viewing video with a TV using the "DualHead DVDMax" 
  feature, you may notice occasionnal jerky video playback (dropped 
  frames) after playing a video for a few minutes. If you view 
  video playback with your computer monitor, this problem shouldn't 
  occur.

- 15-bit color palette support for Windows 2000

  For advanced users: By default, the 15-bit color palette is 
  unavailable for Windows 2000. If you need to use this color 
  palette, you can make it available by adding the 
  "User.Enable15Bpp" value to your Windows registry and then 
  setting this value to "1". If you're adding this value, add it 
  under "HKEY_LOCAL_MACHINE" > "SYSTEM" > "CurrentControlSet" > 
  "Services" > "mgau" or "g200" or "g400" > "Device0". The value 
  type is "REG_DWORD".