;***********************************************************************
;
; OEMSETUP.INF
;
; AWLAN IEEE 802.11b Adapter for Windows NT .INF file
;
;***********************************************************************
;-----------------------------------------------------------------------
; OPTION TYPE
; -----------
; This identifies the Option type we are dealing with. The different
; possible types are:
;
; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ...
;
; Types specific to networking:
;
; NetAdapter, a netcard / adapter combination or just a netcard
; NetDriver, just a netcard driver
; NetTransport, a complete NDIS-compliant TDI transport stack
; NetService, an NT networking service
; NetWork, a complete network ensemble.
; NetProvider a complete network which supports NT MPR protocol
;-----------------------------------------------------------------------
[Identification]
OptionType = NetAdapter
;-----------------------------------------------------------------------
; PlatformsSupported
; ------------------
; This identifies the platforms supported by the adapter card.
; Possible types are:
;
; ISA, EISA, MCA and PCMCIA
;-----------------------------------------------------------------------
[PlatformsSupported]
ISA
; EISA
; PCI
PCMCIA
;-----------------------------------------------------------------------
; OPTION LIST
; -----------
; This section lists the OEM Option key names. These keys are locale
; independent and used to represent the option in a locale independent
; manner.
;
;-----------------------------------------------------------------------
[Options]
AWLAN
;***********************************************************************
; CONSTANTS FOR USING DIALOGS
;***********************************************************************
[FileConstants]
;GenericAdapterName = "AWLAN 11Mb IEEE 802.11b Adapter"
GenericAdapterName = "IEEE 802.11b Wireless LAN Adapter (PCMCIA)"
;GenericDriverName = "AWLAN 11Mb IEEE 802.11b driver"
GenericDriverName = "IEEE 802.11b Wireless LAN driver (PCMCIA)"
GenericSysName = "ws8.sys"
GenericName = "WS8"
;
; File names, etc.
;
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
;
; EventLog Message File
;
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
;
; Product Info
;
Manufacturer = "AWLAN"
ProductMajorVersion = "1"
ProductMinorVersion = "00"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
;
; Software
;
ProductSoftwareName = "WS8"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType = "ws8Sys ndisDriver ws8Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """ws8Sys"" yes no container"
NetRuleSoftwareClass = {"ws8Driver basic"}
NetRuleSoftwareBindable = {"ws8Driver ws8Adapter non exclusive 100"}
;
; Hardware
;
ProductHardwareName = "WS8"
NetRuleHardwareType = "ws8 ws8Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"ws8Adapter basic"}
;
; Registry Key
;
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
PcmciaDataBaseKeyName = $(!NTN_ServiceBase)"\Pcmcia\Database"
[GeneralConstants]
;
; Program flow control variables.
;
from = ""
to = ""
;
; Return codes; Exit_Code is set to one of these
;
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
; Minute, Second }
Now = {} ? $(!LIBHANDLE) GetSystemDate
;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION: To verify that this INF deals with the same type of options
; as we are choosing currently.
;
; INPUT: None
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Option Type (COMPUTER ...)
; $($R2): Diskette description
;---------------------------------------------------------------------------
[Identify]
;
;
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
; STATUS_NOTSUPPORTED
;
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------------------
[ReturnOptions]
;
;
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
;
; Check if the platforms requested is supported
;
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
;
; form a list of all the options and another of the text representing
;
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;------------------------------------------------------------------------
;
; InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
;
; Set default values for
;
set Status = STATUS_FAILED
;
; extract parameters
;
set Option = $($1)
;----read from install
ifstr(i) $(!NTN_Infoption) != ""
set Option = $(!NTN_Infoption)
endif
;----
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
Set !DebugOutputControl = 0
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
;
; Assume all is well.
;
set CommonStatus = STATUS_SUCCESSFUL
EndWait
;
; Set up the operation-mode-based variables and gaily welcome
; the user. If the "install mode" variable is improperly set,
; assume this is a new installation.
;
Begin = +
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
; set ActivateDetection = TRUE
set StartLabel = configureadapter
;
; You cannot config the software component
;
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the AWLAN driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
; set ActivateDetection = TRUE
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
;**************************************************************
; set the default values
;**************************************************************
; I/O Base Address = 0x240
set IOBaseAddrUIVal = "auto"
; IRQ Level = 11
set IRQValueUIVal = "auto"
; PcmciaValue = 0/1
set PcmciaValue = 1
set Chk1 = "ON"
; Ethernet conversion mode = "Encapsulated"/"RFC1042"/"802.1h"
set EthConvList = $(EthConvList)
set EthConvValues = $(EthConvValues)
set EthConvUIVal = "RFC1042"
; Station Mode related default values
set PSLevelValue = 0;
; Power Save Mode = "Disabled"/"Enhanced"
set PSModeList = $(STA_PSModeList)
set PSModeValues = $(STA_PSModeValues)
set PSModeUIVal = "Disabled"
; configure as infrastructure station = "Infrastructure"/"AdHoc"
set NetTypeList = $(STA_NetTypeList)
set NetTypeValues = $(STA_NetTypeValues)
set NetTypeUIVal = "Infrastructure"
; configure for 2 Mb/s default
set TxRateList = $(STA_TxRateList)
set TxRateValues = $(STA_TxRateValues)
set TxRateUIVal = "Fully Auto"
; configure for ATIM Window Disabled
set ATIMWindowList = $(STA_ATIMWindowList)
set ATIMWindowValues = $(STA_ATIMWindowValues)
set ATIMWindowUIVal = "default"
; configure for Listen interval at MAX
set ListenIntervalList = $(STA_ListenIntervalList)
set ListenIntervalValues = $(STA_ListenIntervalValues)
set ListenIntervalUIVal = "default"
; configure for RTS/CTS disabled
set RTSThreshList = $(RTSThreshList)
set RTSThreshValues = $(RTSThreshValues)
set RTSThreshUIVal = "default"
; configure for Fragmentation disabled
set FragThreshList = $(FragThreshList)
set FragThreshValues = $(FragThreshValues)
set FragThreshUIVal = "default"
; configure for WEP Disabled
set WepReqList = $(WepReqList)
set WepReqValues = $(WepReqValues)
set WepReqUIVal = "Disabled"
; PHY parameters DS
set PHYParmName = "DSChannel";
set PHYParmList = $(DSChanList)
set PHYParmValues = $(DSChanValues)
set PHYParmUIVal = 6
set PHYParmLabel = "DS Channel:"
; default SSID - to be customized by OEM customer
;set SSIDValue = "IEEE802.11b WLAN"
set SSIDValue = ""
;Station Name
set ComputerNameKeyName = "SYSTEM\CurrentControlSet\Control\ComputerName\ComputerName"
OpenRegKey $(!REG_H_LOCAL) "" $(ComputerNameKeyName) $(MAXIMUM_ALLOWED) ComputerNameBaseKey
GetRegValue $(ComputerNameBaseKey) ComputerName StationNameTempList
CloseRegKey $(ComputerNameBaseKey)
set StationNameValue = *($(StationNameTempList),4)
Set from = $(fatal)
Set to = $(fatal)
Goto $(StartLabel)
;-----------------------------------------------
; Installation Section
;-----------------------------------------------
installadapter = +
;
; Create/recreate the Registry's PCMCIA database entry for the PCnet-Mobile.
;
set KeyPcmciaDataBase = ""
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaDataBaseKeyName) $(MAXIMUM_ALLOWED) KeyPcmciaDataBase
Shell "" ExCreateRegKey $(KeyPcmciaDataBase) "AWLAN\WS8P/IEEE"
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaDataBaseKeyName)"\AWLAN\WS8P/IEEE" $(MAXIMUM_ALLOWED) KeyTemp
SetRegValue $(KeyTemp) {DeviceType,0,$(!REG_VT_SZ),"NET"}
SetRegValue $(KeyTemp) {Driver,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)}
CloseRegKey $(KeyTemp)
CloseRegKey $(KeyPcmciaDataBase)
;
; Check whether the same version of the software exists
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
;
; Same version already existed in the local machine
; Popup the dialog and ask the user whether he wants to continue
;
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
;
; Cannot Install the same software again
;
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
;
; Add a new adapter card?
;
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
;
; dll load addition
;
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
install "Install-Dll"
goto adaptersetup
;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
; Get the current values of all the parameters
;
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
;
; Get the other parameters; they're attached to the service parameters key
;
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
;
; We don't need the services key, so close it.
;
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
;
; Get the old values
;
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
; resources
ifstr(i) $(ValueName) == "IoBaseAddress"
set IOBaseAddrItem = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValueItem = $(ValueData)
; general - combo
else-ifstr(i) $(ValueName) == "DSChannel"
set PHYParmItem = $(ValueData)
else-ifstr(i) $(ValueName) == "NetworkType"
set NetTypeItem = $(ValueData)
else-ifstr(i) $(ValueName) == "TxRate"
set TxRateItem = $(ValueData)
else-ifstr(i) $(ValueName) == "ATIMWindow"
set ATIMWindowItem = $(ValueData)
else-ifstr(i) $(ValueName) == "ListenInterval"
set ListenIntervalItem = $(ValueData)
else-ifstr(i) $(ValueName) == "RTSThresh"
set RTSThreshItem = $(ValueData)
else-ifstr(i) $(ValueName) == "FragThresh"
set FragThreshItem = $(ValueData)
else-ifstr(i) $(ValueName) == "PSMode"
set PSModeItem = $(ValueData)
else-ifstr(i) $(ValueName) == "WepReq"
set WepReqItem = $(ValueData)
else-ifstr(i) $(ValueName) == "Encapsulation"
set EthConvItem = $(ValueData)
; checkbox
else-ifstr(i) $(ValueName) == "Pcmcia"
set PcmciaValue = $(ValueData)
; edit
else-ifstr(i) $(ValueName) == "SSID"
set SSIDValue = $(ValueData)
endif
EndForListDo
;--------------------------------
;Eric default
;--------------------------------
ifint $(PcmciaValue) == 1
set Chk1 = "ON"
else
set Chk1 = "OFF"
endif
set IOBaseAddrUIVal = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrItem)))
ifstr(i) $(IOBaseAddrUIVal) == ""
set IOBaseAddrUIVal = *($(IOBaseAddrList), 3)
endif
set IRQValueUIVal = *($(IRQList), ~($(IRQValues),$(IRQValueItem)))
ifstr(i) $(IRQValueUIVal) == ""
set IRQValueUIVal = *($(IRQList), 8)
endif
set PHYParmUIVal = *($(PHYParmList), ~($(PHYParmValues),$(PHYParmItem)))
ifstr(i) $(PHYParmUIVal) == ""
set PHYParmUIVal = *($(PHYParmList), 1)
endif
set NetTypeUIVal = *($(NetTypeList), ~($(NetTypeValues),$(NetTypeItem)))
ifstr(i) $(NetTypeUIVal) == ""
set NetTypeUIVal = *($(NetTypeList), 1)
endif
set TxRateUIVal = *($(TxRateList), ~($(TxRateValues),$(TxRateItem)))
ifstr(i) $(TxRateUIVal) == ""
set TxRateUIVal = *($(TxRateList), 1)
endif
set ATIMWindowUIVal = *($(ATIMWindowList), ~($(ATIMWindowValues),$(ATIMWindowItem)))
ifstr(i) $(ATIMWindowUIVal) == ""
set ATIMWindowUIVal = *($(ATIMWindowList), 1)
endif
set ListenIntervalUIVal = *($(ListenIntervalList), ~($(ListenIntervalValues),$(ListenIntervalItem)))
ifstr(i) $(ListenIntervalUIVal) == ""
set ListenIntervalUIVal = *($(ListenIntervalList), 6)
endif
set RTSThreshUIVal = *($(RTSThreshList), ~($(RTSThreshValues),$(RTSThreshItem)))
ifstr(i) $(RTSThreshUIVal) == ""
set RTSThreshUIVal = *($(RTSThreshList), 6)
endif
set FragThreshUIVal = *($(FragThreshList), ~($(FragThreshValues),$(FragThreshItem)))
ifstr(i) $(FragThreshUIVal) == ""
set FragThreshUIVal = *($(FragThreshList), 6)
endif
set PSModeUIVal = *($(PSModeList), ~($(PSModeValues),$(PSModeItem)))
ifstr(i) $(PSModeUIVal) == ""
set PSModeUIVal = *($(PSModeList), 1)
endif
set WepReqUIVal = *($(WepReqList), ~($(WepReqValues),$(WepReqItem)))
ifstr(i) $(WepReqUIVal) == ""
set WepReqUIVal = *($(WepReqList), 1)
endif
set EthConvUIVal = *($(EthConvList), ~($(EthConvValues),$(EthConvItem)))
ifstr(i) $(EthConvUIVal) == ""
set EthConvUIVal = *($(EthConvList), 3)
endif
; Save the settings as they were read from the Registry.
; Shell $(ParamInf) Param_SaveValues
; Set CurrParamSettings = $($R0)
;
; Put up the adapter configuration dialog if necessary.
;
; Note that $(CurrParamSettings) has the old known parameter values.
;
adaptersetup = +
; Shell "" DebugConfiguration "before displaying dialog"
Set from = adapteroptions
adapteroptions = +
LoadLibrary "Disk 1" $(DialogDllName) hLib
set PresentValues = "{"$(IOBaseAddrUIVal)","$(IRQValueUIVal)","$(StationNameValue)"}"
LibraryProcedure result $(hLib) SetupDlg $(IOBaseAddrList) $(IRQList) $(PresentValues)
FreeLibrary $(hLib)
Ifstr(i) $(result) == "Setup dialog was cancelled, you can choice ignore or continue!"
goto end
Endif
set IOBaseAddrUIVal = *($(result), 2)
set IRQValueUIVal = *($(result), 3)
set StationNameValue = *($(result), 1)
ui pop 1
; goto nextstep
else-ifstr(i) $(DLGEVENT) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
;
; Unknow command
;
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
Debug-Output " Combo list out "$(ComboListItemsOut)
;
; If installing, go create the necessary keys;
; if configuring, they're already open.
;
skipoptions =+
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
;
; Add Software Component
;
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
;
; At this point:
; $R1 contains the product version key handle;
; $R2 contains the NetRules subkey handle;
; $R3 contains the new Services key handle; and
; $R4 contains the Parameters key
; $R5 contains the Linkage Key
;
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
;
; Create the HARDWARE\Netcard region and its corresponding service
;
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
;
; At this point:
; $R1 Registry key variable for HARDWARE\Netcard\(n)
; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules
; $R3 Registry key handle for <service>\Parameters key
; $R4 Adapter number assigned to adapter
; $R5 Service name generated by combining svc name with adapter number
;
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
;
; REQUIRED: $(KeyParameters) contains service Parameters key handle
;
writeparameters = +
Shell $(UtilityInf), GetBusTypeNum
; set BusTypeNum = $($R1)
; the above was not working so hard coding the bus type to 1 which represents
; NdisInterfaceIsa
set BusTypeNum = 1
set BusNumber = 0
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
;
; Add the rest of the parameters to the Services area
;
set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrUIVal)))
set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueUIVal)))
set PHYParmValue = *($(PHYParmValues), ~($(PHYParmList),$(PHYParmUIVal)))
set NetTypeValue = *($(NetTypeValues), ~($(NetTypeList),$(NetTypeUIVal)))
set TxRateValue = *($(TxRateValues), ~($(TxRateList),$(TxRateUIVal)))
set ATIMWindowValue = *($(ATIMWindowValues), ~($(ATIMWindowList),$(ATIMWindowUIVal)))
set ListenIntervalValue = *($(ListenIntervalValues), ~($(ListenIntervalList),$(ListenIntervalUIVal)))
set RTSThreshValue = *($(RTSThreshValues), ~($(RTSThreshList),$(RTSThreshUIVal)))
set FragThreshValue = *($(FragThreshValues), ~($(FragThreshList),$(FragThreshUIVal)))
set PSModeValue = *($(PSModeValues), ~($(PSModeList),$(PSModeUIVal)))
set WepReqValue = *($(WepReqValues), ~($(WepReqList),$(WepReqUIVal)))
set EthConvValue = *($(EthConvValues), ~($(EthConvList),$(EthConvUIVal)))
set NewValueList = {+
{MediaType, $(NoTitle),$(!REG_VT_DWORD),1},+
{BusNumber, $(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{IoLength, $(NoTitle),$(!REG_VT_DWORD),64},+
{InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{Pcmcia, $(NoTitle),$(!REG_VT_DWORD),$(PcmciaValue)},+
{MajorVersion, $(NoTitle),$(!REG_VT_SZ),2},+
{MinorVersion, $(NoTitle),$(!REG_VT_SZ),0},+
{SSID, $(NoTitle),$(!REG_VT_SZ), $(SSIDValue)},+
{StationName, $(NoTitle),$(!REG_VT_SZ), $(StationNameValue)},+
{RTSThresh, $(NoTitle),$(!REG_VT_DWORD),$(RTSThreshValue)},+
{FragThresh, $(NoTitle),$(!REG_VT_DWORD),$(FragThreshValue)},+
{Encapsulation, $(NoTitle),$(!REG_VT_DWORD),$(EthConvValue)},+
{TxRate, $(NoTitle),$(!REG_VT_DWORD),$(TxRateValue)},+
{WepReq, $(NoTitle),$(!REG_VT_DWORD),$(WepReqValue)},+
{ATIMWindow, $(NoTitle),$(!REG_VT_DWORD),$(ATIMWindowValue)},+
{ListenInterval, $(NoTitle),$(!REG_VT_DWORD),$(ListenIntervalValue)},+
{NetworkType, $(NoTitle),$(!REG_VT_DWORD),$(NetTypeValue)},+
{PSMode, $(NoTitle),$(!REG_VT_DWORD),$(PSModeValue)},+
{PSLevel, $(NoTitle),$(!REG_VT_DWORD),$(PSLevelValue)},+
{DSChannel, $(NoTitle),$(!REG_VT_DWORD),$(PHYParmValue)},+
}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
goto successful
;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------
UpgradeSoftware = +
;
; First determine whether we want to do upgrade or update for software
; or hardware component. Then we will determine whether the Mode is
; update or upgrade.
;
; If the same version of the product existed in the registry, we do
; update. Otherwise, we will do a upgrade
;
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Upgrade software component
;
; see whether the same version exist or not
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
;
; Update the binaries
;
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
; Upgrade the version number
;
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
;
; do nothing for update
;
ifint $(Version) != $(ProductVersion)
;
; If the major version number is not the same,
; it is major upgrade. So let Upgrade the product
;
;
; make other upgrade change if necessary
;
endif
CloseRegKey $(KeyProduct)
else
;
; Cannot Open software key, goto ERROR
;
goto fatalregistry
endif
else
;
; upgrade/update hardware component
; There is no different between upgrade and update for hardware
; component
;
; 1. Get the Service Name
; 2. Change the NetRule section if necessary
;
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
$(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
;
; Get Service name
;
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
;
; Change the NetRule if necessary
;
OpenRegKey $(NetworkCardKey) "" "NetRules" +
$(MAXIMUM_ALLOWED) NetRuleKey
Ifstr(i) $(NetRuleKey) != $(KeyNull)
;
; Make the change....
;
else
;
; Error, cannot open net rules key
;
goto fatalregistry
endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
else
;
; Error, cannot open network card key
;
goto fatalregistry
endif
;
; 3. Change the service section of the hardware. i.e.,
; ParameterName change, value change, etc.
;
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
Ifstr(i) $(ServiceKey) != $(KeyNull)
;
; Get the ServiceKey to change the Start value
; or Type value. Or open Parameters key to
; change the hardware parameters if necessary.
;
CloseRegKey $(ServiceKey)
else
;
; Error, cannot open network card key
;
goto fatalregistry
endif
endif
goto end
;
; End of Upgrade Software
;
;
; Escape hatches
;
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;
; warning display
;
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
;
; non fatal error display
;
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
;
; Registry is broken
;
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
;
; Netcard detection failure
;
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
;
; fatal error display
;
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
;
; Shelling error
;
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
;
; if OEM_ABANDON_ON == TRUE, then remove the registry entries
;
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[DebugConfiguration]
Set InfName = "OEMNADE2.INF"
Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0)
Debug-Output $(InfName)" IRQ_Level is "$(!p:IRQ_Level)
Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue)
Debug-Output $(InfName)" TransceiverValue is "$(!p:TransceiverValue)
Debug-Output $(InfName)" MemBaseAddrDec is "$(!p:MemBaseAddrDec)
Debug-Output $(InfName)" MappedValue is "$(!p:MappedValue)
return
;***************************************************************
; INSTALL SECTIONS
;***************************************************************
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
;
; Add the files to the copy list
;
; BUGBUG: eliminate the "nt2" in the next line when Sunil fixes
; the other INF files
;
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
;AddSectionFilesToCopyList Files-exe $(SrcDir) $(!STF_WINDOWSSYSPATH)
;AddSectionFilesToCopyList Files-exe $(SrcDir) $(!STF_WINDOWSPATH)"\Profiles\All Users\desktop"
;AddSectionFilesToCopyList Files-exe $(SrcDir) $(!STF_WINDOWSPATH)"\Profiles\All Users\Start Menu\Programs\Startup"
endif
ifstr(i) $(DoCopy) == "YES"
; Copy files in the copy list
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
;set STF_VERSION = "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
;AddSectionFilesToCopyList Files-exe $(SrcDir) $(!STF_WINDOWSPATH)"\Profiles\All Users\desktop"
;AddSectionFilesToCopyList Files-exe $(SrcDir) $(!STF_WINDOWSPATH)"\Profiles\All Users\Start Menu\Programs\Startup"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-Dll]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "AWLAN 11Mb 802.11 Adapter"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1, oemsetup.inf, SIZE=40558, RENAME=$(!UG_Filename)
[Files-AWLAN]
1, ws8.sys, SIZE=12800
[Files-Dll]
1, ws8.dll , SIZE=7168
;[Files-exe]
;1, awlan.exe, SIZE=30000
[LanguagesSupported]
ENG
[OptionsTextENG]
AWLAN = "IEEE 802.11b Wireless LAN Adapter (PCMCIA)"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = $(GenericAdapterName)" Setup"
ProductSoftwareDescription = $(GenericDriverName)
ProductHardwareDescription = $(GenericAdapterName)
ProductSoftwareTitle = $(GenericDriverName)
ProductHardwareTitle = $(GenericAdapterName)
DialogDllName = "ws8.dll"
IOBaseAddrList = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(IOBaseAddrChoices, 2)
IRQList = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
DSChanList = ^(DSChanChoices, 1)
DSChanValues = ^(DSChanChoices, 2)
STA_NetTypeList = ^(STA_NetTypeChoices, 1)
STA_NetTypeValues = ^(STA_NetTypeChoices, 2)
STA_TxRateList = ^(STA_TxRateChoices, 1)
STA_TxRateValues = ^(STA_TxRateChoices, 2)
STA_ATIMWindowList = ^(STA_ATIMWindowChoices, 1)
STA_ATIMWindowValues = ^(STA_ATIMWindowChoices, 2)
STA_ListenIntervalList = ^(STA_ListenIntervalChoices, 1)
STA_ListenIntervalValues= ^(STA_ListenIntervalChoices, 2)
RTSThreshList = ^(RTSThreshChoices, 1)
RTSThreshValues = ^(RTSThreshChoices, 2)
FragThreshList = ^(FragThreshChoices, 1)
FragThreshValues = ^(FragThreshChoices, 2)
STA_PSModeList = ^(STA_PSModeChoices, 1)
STA_PSModeValues = ^(STA_PSModeChoices, 2)
WepReqList = ^(WepReqChoices, 1)
WepReqValues = ^(WepReqChoices, 2)
EthConvList = ^(EthConvChoices, 1)
EthConvValues = ^(EthConvChoices, 2)
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[MemoryMappedChoicesENG]
Map_1 = 1, "ON"
Map_2 = 0, "OFF"
[IOBaseAddrChoices]
IOBase_auto = "auto", 512
IOBase_1 = "200",512
IOBase_2 = "240",576
IOBase_3 = "280",640
IOBase_4 = "2C0",704
IOBase_5 = "300",768
IOBase_6 = "340",832
IOBase_7 = "380",896
IOBase_8 = "3C0",960
[IRQChoices]
IRQ_auto = "auto", 11
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
IRQ_4 = "7",7
IRQ_5 = "9",9
IRQ_6 = "10",10
IRQ_7 = "11",11
IRQ_8 = "12",12
IRQ_9 = "15",15
[DSChanChoices]
DSCHAN_1 = "1",1
DSCHAN_2 = "2",2
DSCHAN_3 = "3",3
DSCHAN_4 = "4",4
DSCHAN_5 = "5",5
DSCHAN_6 = "6",6
DSCHAN_7 = "7",7
DSCHAN_8 = "8",8
DSCHAN_9 = "9",9
DSCHAN_10 = "10",10
DSCHAN_11 = "11",11
[STA_NetTypeChoices]
;NETTYPE_ADHOC = "Pseudo-IBSS Station",3
NETTYPE_ADHOC = "AdHoc",3
NETTYPE_INFRA = "Infrastructure",1
[STA_TxRateChoices]
TXRATE_1 = "1 Mb/s", 1
TXRATE_2 = "2 Mb/s", 2
TXRATE_1_2 = "Auto 1 or 2 Mb/s", 3
TXRATE_55 = "5.5 Mb/s", 4
TXRATE_11 = "11 Mb/s", 8
TXRATE_ALL = "Fully Auto", 15
[STA_ATIMWindowChoices]
ATIMWIN_0 = "default", 0
ATIMWIN_10 = "10 ms", 10
ATIMWIN_20 = "20 ms", 20
ATIMWIN_30 = "30 ms", 30
ATIMWIN_40 = "40 ms", 40
ATIMWIN_50 = "50 ms", 50
ATIMWIN_60 = "60 ms", 60
ATIMWIN_70 = "70 ms", 70
ATIMWIN_80 = "80 ms", 80
ATIMWIN_90 = "90 ms", 90
[STA_ListenIntervalChoices]
LISTENINT_1 = "1 Beacon Per", 1
LISTENINT_2 = "2 Beacon Per", 2
;LISTENINT_3 = "3 Beacon Per", 3
LISTENINT_4 = "4 Beacon Per", 4
LISTENINT_5 = "5 Beacon Per", 5
LISTENINT_3 = "default", 3
LISTENINT_M = "Maximum", 6
[STA_PSModeChoices]
PS_DIS = "Disabled", 1
PS_ENH = "Enhanced", 2
[RTSThreshChoices]
RTSTHRESH_256 = "256 Bytes", 256
RTSTHRESH_512 = "512 Bytes", 512
RTSTHRESH_768 = "768 Bytes", 768
RTSTHRESH_1024 = "1024 Bytes", 1024
RTSTHRESH_1280 = "1280 Bytes", 1280
RTSTHRESH_DIS = "default", 2432
[FragThreshChoices]
FRAGTHRESH_256 = "256 Bytes", 256
FRAGTHRESH_512 = "512 Bytes", 512
FRAGTHRESH_768 = "768 Bytes", 768
FRAGTHRESH_1024 = "1024 Bytes", 1024
FRAGTHRESH_1280 = "1280 Bytes", 1280
FRAGTHRESH_DIS = "default", 2432
[WepReqChoices]
WEP_DIS = "Disabled", 0
;WEP_MAN = "Mandatory", 2
[STA_List]
"STA_HAR_PCM"
"STA_LUC_PCM"
[DS_List]
"STA_HAR_PCM"
"STA_LUC_PCM"
[EthConvChoices]
EthConv_Encapsulated ="Encapsulated", 0
EthConv_RFC1042 ="RFC1042", 1
EthConv_802.1h ="802.1h", 2
[ExCreateRegKey]
Debug-Output "******************Entering [ExCreateRegKey]******************"
set ECR_Result = NO_ERROR
set ECR_BaseKeyHandle = $($0)
set ECR_NewPath = $($1)
set KeyNull = ""
set MAXIMUM_ALLOWED = 33554432
Debug-Output "ExCreateRegKey - ECR_BaseKeyHandle = "$(ECR_BaseKeyHandle)
Debug-Output " ECR_NewPath = "$(ECR_NewPath)
Debug-Output " MAXIMUM_ALLOWED = "$(MAXIMUM_ALLOWED)
Debug-Output " KeyNull = "$(KeyNull)
OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_NewPath) $(MAXIMUM_ALLOWED) +
ECR_BaseKey
Debug-Output "ECR_BaseKey = "$(ECR_BaseKey)
Debug-Output " OpenRegKey returned "$($R0)
Ifstr $(ECR_BaseKey) == $(KeyNull)
Debug-Output "ECR_BaseKey == KeyNull"
Else
Debug-Output "ECR_BaseKey != KeyNull"
set ECR_KeyHandle = $(ECR_BaseKey)
goto ECR_Return
Endif
set ECR_TmpPath = ""
Split-String $(ECR_NewPath) "\" ECR_PList
Debug-Output "ECR_PList = "$(ECR_PList)
ForListDo $(ECR_PList)
Ifstr(i) $($) != "\"
Ifint $(#) == 1
set ECR_TmpPath = $($)
Else
set ECR_TmpPath = $(ECR_TmpPath)"\"$($)
Endif
Debug-Output "Determining if "$(ECR_TmpPath)" exists"
OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_TmpPath) $(MAXIMUM_ALLOWED) ECR_BaseKey
Ifstr $(ECR_BaseKey) == $(KeyNull)
Debug-Output "Creating "$(ECR_TmpPath)
CreateRegKey $(ECR_BaseKeyHandle) {$(ECR_TmpPath),0,GenericClass} "" $(MAXIMUM_ALLOWED) "" ECR_KeyHandle
Ifstr(i) $(ECR_KeyHandle) == $(KeyNull)
set ECR_Result = $($R0)
goto ECR_Return
Endif
Endif
Endif
EndForListDo
ECR_Return = +
return $(ECR_Result) $(ECR_KeyHandle)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.