1. MD010C.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (MD010C.zip)

CardBus Ethernet Card Installation on Linux
1. If you are using RedHat 7.0, you must download the new rpm at http://www.rpmfind.net to replace the old pcmcia-cs-3.1.19 to
pcmcia-cs-3.1.24-1.i586.rpm..rpm, which can be found at "RedHat_7.0/sourcecode/" 

To unzip: "rpm -ivh pcmcia-cs-3.1.24-1.i586.rpm..rpm"


2. Compile the source code 
copy the source code rtl8139.c and kern_compat.h pci-scan.h  to a directory .
and exectue "gcc -DCARDBUS -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c -I/usr/src/linux/include rtl8139.c -o realtek_cb.o -I/usr/src/linux/pcmcia-cs-3.1.19/include/"
This will create a realtek_cb.o file
Note: When copying the source code rtl8139.c and kern_compath.h pci-scan.h  to a directory in Linux, please make sure the file names stay as kern_compath.h.


or run "\. make.bat"---> make.bat = "gcc -DCARDBUS -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c -I/usr/src/linux/include rtl8139.c -o realtek_cb.o -I/usr/src/linux/pcmcia-cs-3.1.19/include/"
This will create a realtek_cb.o file

3. Copy driver :
-->copy the file "realtek_cb.o" to "lib/module/2.2.16-22/pcmcia"

4.Edit config:
-->Add the following 5 lines to the file "/etc/pcmcia/config"

#
# Device driver definitions
#

drvice "realtek_cb"
   class "network" module "cb_enabler", "realtek_cb"


:
:

#
# CardBus Cards
#

card "10/100 CardBus Card"
  manfid 0x0000, 0x021b
  bind "realtek_cb"


The value 0x0000, 0x021b can be read by typing 
"cardctl ident" on console with one card socket
 
5.Restart the computer
"/etc/rc.d/init.d/pcmcia restart"

6. More information about kernel compile:
http://metalab.unc.edu/mdw/HOWTO/Kernel-HOWTO.html
   More information about install: man pcmcia
  
http://www.rpmfind.net