WIN95.TXT Driver File Contents (NA010.zip)

*****************************************************************************
*                                                                           *
*                        PNP ISA ETHERNET ADAPTER                           *
*                                                                           *
*                      NDIS/3 Driver for Windows 95                         *
*                                                                           *
*****************************************************************************

Plug & Play Mode:

A) NDIS/3 Driver Installation for Windows 95
   =========================================
   1. Plug adapter into one of the ISA slots on your PC.

   2. Turn the PC power on then boot from Windows 95.

   3. Windows 95 will prompt "NE2000 PLUG & PLAY ETHERNET CARD" in the
      "New Hardware Found" dialog box.

   4. Select "Driver from disk provided by hardware manufacturer"
      from "New Hardware Found" dialog box, then click OK button.

   5. Insert the Adapter Driver Diskette in your floppy drive.

   6. Enter the driver pathname, i.e. A:\ (or B:\), then click OK
      button from "Install from Disk" dialog box.

   7. Follow the screen's prompt to insert "Windows 95 CD-ROM"
      and click OK button from "Insert Disk" dialog box.

   8. Otherwise enter the full pathname of the "Windows 95 CD-ROM"
      installation files in "Copying Files..." dialog box,
      then click OK button.

   9. Windows 95 will copy the driver from A:\WIN95 to C:\WINDOWS\SYSTEM
      directory and the NETNDIS.INF file from A:\ to C:\WINDOWS\INF directory.

  10. Remove the Adapter Driver Diskette from your floppy drive.

  11. Restart your computer to take effect the network function.

      NOTICE !! C:\WINDOWS is the directory where your Windows 95
                O.S. is located.


B) NDIS/3 Driver Installation for Windows 95 OSR2
   ==============================================
   1. Plug adapter into one of the ISA slots on your PC.

   2. Turn the PC power on then boot from Windows 95.

   3. Windows 95 will prompt "NE2000 Compatible" in "Update Device Driver
      Wizard" dialog box.

   4. Insert the Adapter Driver Diskette in your floppy drive.

   5. Click "Next >" button from "Update Device Driver Wizard" dialog box.

   6. Windows 95 will prompt "PNP ISA Ethernet Adapter" in the
      "Update Device Driver Wizard" dialog box.

   7. Click "Finish" button from "Update Device Driver Wizard" dialog box.

   8. Enter the full pathname A:\ of the NETNDIS.INF file, then click OK
      button from "Copying Files..." dialog box.

   9. Follow the screen's prompt to insert "Windows 95 CD-ROM" and click
      OK button from "Insert Disk" dialog box.

  10. Otherwise enter the full pathname of the "Windows 95 CD-ROM"
      installation files in "Copying Files..." dialog box,
      then click OK button.

  11. Windows 95 will copy the driver from A:\WIN95 to C:\WINDOWS\SYSTEM
      directory and the NETNDIS.INF file from A:\ to C:\WINDOWS\INF directory.

  12. Remove the Adapter Driver Diskette from your floppy drive.

  13. Restart your computer to take effect the network function.

      NOTICE !! C:\WINDOWS is the directory where your Windows 95 OSR2
                O.S. is located.


Jumperless Mode:

  NDIS/3 Driver Installation for Windows 95 / Windows 95 OSR2
  ===========================================================
  1. From "Control Pannel" select "Network" icon.

  2. Select "Adapter" icon.

  3. Select "Add" icon.

  4. Select "Have Disk" icon.

  5. Insert driver diskette and input the path "A:\"

  6. Select "PNP ISA Ethernet Adapter" and click OK button.

  7. Specify the correct Interrupt(IRQ) and I/O address range. It must
     match with your adapter's configuration, otherwise network function
     can't work properly. Click OK button.

  8. Windows 95 will copy the driver from A:\WIN95 to C:\WINDOWS\SYSTEM
     directory and the NETNDIS.INF file from A:\ to C:\WINDOWS\INF directory.

  9. Remove the Adapter Driver Diskette from your floppy drive.

 10. Restart your computer to take effect the network function.

----
All trademarks or brand names mentioned are properties
of their respective companies.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.19