; AcoCSS.INF ; ; ACOTEC CAPI20 Subsystem (CSS) - CAPI-Protocol and associated Services ; ; Copyright 1993-1995, ACOTEC GmbH [version] signature="$CHICAGO$" Class=NetTrans provider=%V_ACOTEC% ;**************************************************************************** ; Windows 95 first time Class Installation ;**************************************************************************** [CLassInstall] AddReg=NetTrans.AddReg CopyFiles=NetTrans.CopyFiles [NetTrans.AddReg] HKR,,,,%V_CLASSNAME% HKR,,Installer,,netdi.dll HKR,,Icon,,-6 HKR,,NoUseClass,,1 [NetTrans.CopyFiles] ; BUGBUG uncomment when mstcp added ;mstcp.dll ;**************************************************************************** ; ACOTEC CAPI20 Subsystem Installation ;**************************************************************************** [Manufacturer] %V_ACOTEC_Berlin%=ACOTEC [ACOTEC] %VCAPI20D.DeviceDesc%= VCAPI20D.ndi, VCAPID ; CAPI20 protocol [VCAPI20D.ndi] AddReg=VCAPI20D.ndi.reg, AcoPort1.AddReg, AcoModem1.AddReg ;Unique PnP ID, entry need to be present so that setup can back track ;the device name from the driver DeviceID=VCAPID [VCAPI20D.ndi.reg] ; Install sections HKR,Ndi\Install,,,"VCAPI20D.Install" HKR,Ndi\Remove,,,"VCAPI20D.Remove" ; Basic info HKR,Ndi,DeviceID,,VCAPID HKR,Ndi,MaxInstance,,1 ; NDIS Info HKR,NDIS,LogDriverName,,VCAPID HKR,NDIS,MajorNdisVersion,1,03 HKR,NDIS,MinorNdisVersion,1,0A ; Interfaces HKR,Ndi\Interfaces,Upper,,"capi" HKR,Ndi\Interfaces,Lower,,"capindis" HKR,Ndi\Interfaces,DefUpper,,"capi" HKR,Ndi\Interfaces,DefLower,,"capindis" HKR,Ndi\Interfaces,UpperRange,,"capi" HKR,Ndi\Interfaces,LowerRange,,"capindis" [VCAPI20D.Install] AddReg= VCAPI20D.AddReg DelFiles= VCapi20D.DelTxtFiles, VCAPI20D.DelFiles, VCAPI20D.DelInfFiles CopyFiles= VCAPI20D.CopyInfFiles, VCAPI20D.CopyFiles, VCapi20D.CopyTxtFiles [VCAPI20D.AddReg] HKR,,DevLoader,,*ndis HKR,,DeviceVxDs,,vcapid.vxd HKR,,DriverDesc,,"ACOTEC CAPI20 Protocol V 1.0" HKLM,System\CurrentControlSet\Services\VxD\VCAPID, Interrupt,1, F1,00,00,00 [VCAPI20D.Remove] DelReg= VCAPI20D.DelReg, AcoPort1.DelReg, AcoPort2.DelReg, AcoModem1.DelReg, AcoModem2.DelReg DelFiles= VCAPI20D.DelInfFiles, VCAPI20D.DelFiles [VCAPI20D.DelReg] HKLM,System\CurrentControlSet\Services\VxD\VCAPID ;**************************************************************************** ; The hardwired AcoPorts needed to connect to AcoModem ;**************************************************************************** [AcoPort1.DelReg] HKLM,hardware\devicemap\serialcomm, AcoISDN1 HKLM,Enum\Root\ports\AcoISDN1 HKLM,System\CurrentControlSet\Services\Class\ports\AcoISDN1 [AcoPort2.DelReg] HKLM,hardware\devicemap\serialcomm, AcoISDN2 HKLM,Enum\Root\ports\AcoISDN2 HKLM,System\CurrentControlSet\Services\Class\ports\AcoISDN2 [AcoPort1.AddReg] ; First port HKLM,hardware\devicemap\serialcomm, AcoISDN1,, AcoISDN1 HKLM,Enum\Root\ports\AcoISDN1, Class,, ports HKLM,Enum\Root\ports\AcoISDN1, ConfigFlags,1, 00,00,00,00 HKLM,Enum\Root\ports\AcoISDN1, DeviceDesc,, "ISDN Port (AcoISDN1)" HKLM,Enum\Root\ports\AcoISDN1, Driver,, ports\AcoISDN1 HKLM,Enum\Root\ports\AcoISDN1, estart,1, 00 HKLM,Enum\Root\ports\AcoISDN1, FriendlyName,, "ISDN Port (AcoISDN1)" HKLM,Enum\Root\ports\AcoISDN1, HardwareID,, ISDNMDM HKLM,Enum\Root\ports\AcoISDN1, Mfg,, "ACOTEC GmbH Berlin" HKLM,Enum\Root\ports\AcoISDN1, NoSetupUI,, 1 HKLM,Enum\Root\ports\AcoISDN1, PortName,, AcoISDN1 HKLM,System\CurrentControlSet\Services\Class\ports\AcoISDN1, ConfigDialog,, serialui.dll HKLM,System\CurrentControlSet\Services\Class\ports\AcoISDN1, Contention,, *vcd HKLM,System\CurrentControlSet\Services\Class\ports\AcoISDN1, DCB,1, 1C,00,00,00, 80,25,00,00, 11,33,00,00, 00,00,0A,00, 0A,00,08,00, 00,11,13,00, 00,00 HKLM,System\CurrentControlSet\Services\Class\ports\AcoISDN1, DevLoader,, *vcomm HKLM,System\CurrentControlSet\Services\Class\ports\AcoISDN1, DriverDesc,, "ISDN Port" HKLM,System\CurrentControlSet\Services\Class\ports\AcoISDN1, PortDriver,, acomodem.386 HKLM,System\CurrentControlSet\Services\Class\ports\AcoISDN1, PortSubClass,1, 01 [AcoPort2.AddReg] ; Second port HKLM,hardware\devicemap\serialcomm, AcoISDN2,, AcoISDN2 HKLM,Enum\Root\ports\AcoISDN2, Class,, ports HKLM,Enum\Root\ports\AcoISDN2, ConfigFlags,1, 00,00,00,00 HKLM,Enum\Root\ports\AcoISDN2, DeviceDesc,, "ISDN Port (AcoISDN2)" HKLM,Enum\Root\ports\AcoISDN2, Driver,, ports\AcoISDN2 HKLM,Enum\Root\ports\AcoISDN2, estart,1, 00 HKLM,Enum\Root\ports\AcoISDN2, FriendlyName,, "ISDN Port (AcoISDN2)" HKLM,Enum\Root\ports\AcoISDN2, HardwareID,, ISDNMDM HKLM,Enum\Root\ports\AcoISDN2, Mfg,, "ACOTEC GmbH Berlin" HKLM,Enum\Root\ports\AcoISDN2, NoSetupUI,, 1 HKLM,Enum\Root\ports\AcoISDN2, PortName,, AcoISDN2 HKLM,System\CurrentControlSet\Services\Class\ports\AcoISDN2, ConfigDialog,, serialui.dll HKLM,System\CurrentControlSet\Services\Class\ports\AcoISDN2, Contention,, *vcd HKLM,System\CurrentControlSet\Services\Class\ports\AcoISDN2, DCB,1, 1C,00,00,00, 80,25,00,00, 11,33,00,00, 00,00,0A,00, 0A,00,08,00, 00,11,13,00, 00,00 HKLM,System\CurrentControlSet\Services\Class\ports\AcoISDN2, DevLoader,, *vcomm HKLM,System\CurrentControlSet\Services\Class\ports\AcoISDN2, DriverDesc,, "ISDN Port" HKLM,System\CurrentControlSet\Services\Class\ports\AcoISDN2, PortDriver,, acomodem.386 HKLM,System\CurrentControlSet\Services\Class\ports\AcoISDN2, PortSubClass,1, 01 ;**************************************************************************** ; The hardwired AcoModem's for RNA ;**************************************************************************** [AcoModem1.DelReg] HKLM,Enum\Root\Modem\AcoISDN1 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1 [AcoModem2.DelReg] HKLM,Enum\Root\Modem\AcoISDN2 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2 [AcoModem1.AddReg] ; First modem HKLM,Enum\Root\Modem\AcoISDN1, ConfigFlags,1, 00,00,00,00 HKLM,Enum\Root\Modem\AcoISDN1, Class,, Modem HKLM,Enum\Root\Modem\AcoISDN1, Driver,, Modem\AcoISDN1 HKLM,Enum\Root\Modem\AcoISDN1, DeviceDesc,, "ISDN Modem (AcoISDN1)" HKLM,Enum\Root\Modem\AcoISDN1, FriendlyName,, "ISDN Modem (AcoISDN1)" HKLM,Enum\Root\Modem\AcoISDN1, Mfg,, "ACOTEC GmbH Berlin" HKLM,Enum\Root\Modem\AcoISDN1, NoSetupUI,, 1 ;HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, eaz,,5 ;HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, b2prot,,1 ;HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, async_ppp,,0 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, ID,1, 00,00,00,00 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, Manufacturer,,"ACOTEC GmbH Berlin" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, AttachedTo,,AcoISDN1 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, FriendlyDriver,,Unimodem.vxd HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, DevLoader,,*vcomm HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, ConfigDialog,,modemui.dll HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, EnumPropPages,,"modemui.dll,EnumPropPages" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, Properties, 1, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,c2,01,00, 00,c2,01,00 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, Default, 1, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 80,02,00,00 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, DCB, 1, 1C,00,00,00, 00,C2,01,00, 11,00,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, DeviceType, 1, 02 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, Logging, 1, 01 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, LoggingPath,,acomodem.log HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, UserInit,, "AT+MSN=+CPN=+P=HDLC+F=DETECT" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1, Reset,, "ATZ<cr>" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Answer, 1,, "ATA<cr>" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Hangup, 1,, "ATH<cr>" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Init, 1,, "AT<cr>" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Init, 2,, "AT&FE0V0&C1&D2S0=0<cr>" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Monitor, 1,, "None" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Responses, "<cr><lf>ERROR<cr><lf>", 1, 03,00,00,00, 00,00,00,00, 00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Responses, "0<cr>", 1, 00, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Responses, "1<cr>", 1, 02, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Responses, "2<cr>", 1, 08, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Responses, "3<cr>", 1, 04, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Responses, "4<cr>", 1, 03, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Responses, "CONNECT", 1, 02, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Responses, "DISCONNECT",1, 04, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Responses, "RING", 1, 08, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Settings, Prefix,, "AT" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Settings, Terminator,, "<cr>" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Settings, DialPrefix,, "D" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN1\Settings, DialSuffix,, ";" [AcoModem2.AddReg] ; The second modem HKLM,Enum\Root\Modem\AcoISDN2, ConfigFlags,1, 00,00,00,00 HKLM,Enum\Root\Modem\AcoISDN2, Class,, Modem HKLM,Enum\Root\Modem\AcoISDN2, Driver,, Modem\AcoISDN2 HKLM,Enum\Root\Modem\AcoISDN2, DeviceDesc,, "ISDN Modem (AcoISDN2)" HKLM,Enum\Root\Modem\AcoISDN2, FriendlyName,, "ISDN Modem (AcoISDN2)" HKLM,Enum\Root\Modem\AcoISDN2, Mfg,, "ACOTEC GmbH Berlin" HKLM,Enum\Root\Modem\AcoISDN2, NoSetupUI,, 1 ;HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, eaz,, 5 ;HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, b2prot,, 1 ;HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, async_ppp,, 0 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, ID,1, 00,00,00,00 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, Manufacturer,, "ACOTEC GmbH Berlin" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, AttachedTo,, AcoISDN2 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, FriendlyDriver,, Unimodem.vxd HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, DevLoader,, *vcomm HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, ConfigDialog,, modemui.dll HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, EnumPropPages,, "modemui.dll,EnumPropPages" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, Properties,1, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,c2,01,00, 00,c2,01,00 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, Default,1, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 80,02,00,00 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, DCB,1, 1C,00,00,00, 00,C2,01,00, 11,00,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, DeviceType,1, 02 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, Logging,1, 01 HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, LoggingPath,, acomodem.log HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, UserInit,, "AT+MSN=+CPN=+P=HDLC+F=DETECT" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2, Reset,, "ATZ<cr>" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Answer, 1,, "ATA<cr>" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Hangup, 1,, "ATH<cr>" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Init, 1,, "AT<cr>" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Init, 2,, "AT&FE0V0&C1&D2S0=0<cr>" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Monitor, 1,, "None" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Responses, "<cr><lf>ERROR<cr><lf>", 1, 03,00,00,00, 00,00,00,00, 00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Responses, "0<cr>", 1, 00, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Responses, "1<cr>", 1, 02, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Responses, "2<cr>", 1, 08, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Responses, "3<cr>", 1, 04, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Responses, "4<cr>", 1, 03, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Responses, "CONNECT", 1, 02, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Responses, "DISCONNECT",1, 04, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Responses, "RING", 1, 08, 00, 00, 00, 00, 00, 00,00,00,00 ; HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Settings, Prefix,, "AT" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Settings, Terminator,, "<cr>" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Settings, DialPrefix,, "D" HKLM,System\CurrentControlSet\Services\Class\Modem\AcoISDN2\Settings, DialSuffix,, ";" ;**************************************************************************** ; File Copy and remove information ;**************************************************************************** [DestinationDirs] NetTrans.CopyFiles = 11 ; System directory VCAPI20D.CopyFiles = 11 ; System directory VCAPI20D.DelFiles = 11 VCAPI20D.CopyInfFiles = 17 ; INF directory VCAPI20D.DelInfFiles = 17 VCAPI20D.CopyTxtFiles = 10, desktop ; Windows95/desktop directory VCAPI20D.DelTxtFiles = 10, desktop [SourceDisksFiles] ; ACOTEC CSS Setup AcoCSS.inf = 1 ; ACOTEC CSS VxD vcapid.vxd = 1 ; ACOTEC CAPI DLLs capi20.dll = 1 capi2032.dll = 1 ; ACOTEC ISDN Modem support acomodem.386 = 1 ; ACOTEC ISDN TAPI support acotsp.tsp = 1 acotspex.exe = 1 ; ACOTEC CSS Info Readme.doc = 1 ; will be renamed to AcoCSS.doc in desktop directory ; Windows95 Telephony Support (from basic Windows 95 distribution media) telephon.cpl=2,,34184,54631fe ; Windows95 RNA Server DLL rnaserv.dll = 3 [SourceDisksNames] 1 = "Windows 95 CAPI Subsystem - Disk 1",,0 2 = "Windows 95 Disk 14","win95_14.cab",0 3 = "Windows 95 Disk ??","win95_??.cab",0 [VCAPI20D.CopyInfFiles] AcoCSS1.inf [VCAPI20D.CopyFiles] vcapid.vxd,vcapid.vx_ capi20.dll,capi20.dl_ capi2032.dll,capi2032.dl_ acomodem.386,acomodem.38_ acotsp.tsp,acotsp.ts_ acotspex.exe,acotspex.ex_ css.ver telephon.cpl rnaserv.dll [VCAPI20D.CopyTxtFiles] AcoCSS.doc,acocss.do_ [VCAPI20D.DelInfFiles] AcoCSS1.inf [VCAPI20D.DelFiles] vcapid.vxd capi20.dll capi2032.dll acomodem.386 acotsp.tsp acotspex.exe [VCAPI20D.DelTxtFiles] AcoCSS.doc ;**************************************************************************** ; Localizable Strings ;**************************************************************************** [strings] V_ACOTEC="ACOTEC GmbH" V_CLASSNAME="Network Transport" ; Manufacturers V_ACOTEC_Berlin="ACOTEC GmbH Berlin" ; Devices VCAPI20D.DeviceDesc="ACOTEC CAPI20 Protocol V 1.0"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.