readme.txt Driver File Contents (1677_411.exe)

[English]
README.TXT                  MATROX GRAPHICS INC.              1998.07.03

                    Matrox PowerDesk for Windows 95/98
                             Revision 4.11.011


Table of Contents
-----------------

- Description of This Release
- Installation
- More Information
- Registry Settings
- Notes, Problems, and Limitations
- Matrox Diagnostic program
- IRQSET.EXE program



Description of This Release
---------------------------

This product includes a Windows 95/98 display driver AND the Matrox
PowerDesk for Windows 95/98, which allows: virtual desktop, hardware 
pan and zoom, DirectDraw/Direct3D driver and more...



Installation
------------

To install both Matrox PowerDesk and the Matrox display driver, start the
included "setup" program.

The setup program first asks you which language you want to use, then 
to choose between a "Typical" or "Custom" installation. With a 
"Typical" installation, the setup program installs all Matrox PowerDesk
utilities in the default "\Program Files\Matrox MGA PowerDesk" folder.
We recommend you use "Typical".

After PowerDesk is installed, the setup program automatically changes
the Windows 95/98 display driver, then prompts you to restart your computer
for all changes to take effect.

You can customize the installation process by editing the "mga.ini"
file. For example, you can change the default installation path, default
driver performance switches, default schemes, and so on. The file is
self-documented. This type of customization is for advanced users only.



More Information
----------------

For more information on settings, refresh rates etc., see the WordPad
file "online.doc". This file is included on the Matrox disk, and installed
in your "\Program Files\Matrox MGA PowerDesk\" folder.



Registry Settings
-----------------

PowerDesk settings are kept in the Windows 95/98 registry, under the keys:

HKEY_LOCAL_MACHINE\SOFTWARE\MATROX\POWERDESK 
HKEY_LOCAL_MACHINE\SOFTWARE\MATROX\DESKNAV
HKEY_LOCAL_MACHINE\SOFTWARE\MATROX\COLOR CONTROL



Notes, Problems, and Limitations
--------------------------------

- DirectDraw, Direct3D and DirectVideo support

  The DirectDraw driver we provide is compatible with DirectX 2 (and
  later) and includes Direct3D support. For our DirectDraw/Direct3D
  driver to be called, and benefit from hardware acceleration,
  Microsoft DirectX 2 (or later) MUST be installed, even for programs
  originally made for DirectX 1.

  We provide DirectX 2 on the Matrox CD-ROM. The latest DirectX is
  available from the Microsoft Web site, and is included with many 
  DirectX programs.

  IMPORTANT: If the DirectX setup program prompts you to replace the
  existing display drivers, click "No". Otherwise, the setup program 
  installs display drivers which are not as optimized as the Matrox 
  drivers and which do not support PowerDesk software.

  Note that depending on the origin of your Microsoft DirectX software, 
  it may not include DirectVideo support. For faster playback of Indeo 
  and Cinepak AVI files, you should install Microsoft DirectVideo 
  support. 

- Matrox bus mastering

  This driver supports bus mastering. Bus mastering is a feature that 
  allows expansion cards to perform tasks at the same time as your 
  computer's CPU. If you have a fast Pentium computer (faster than 
  166 MHz), the display performance of most programs is improved when 
  bus mastering is used.

  To use bus mastering with 3D (DirectX) programs, your graphics card 
  needs an interrupt request (IRQ). Most computers automatically assign 
  an IRQ to graphics cards, but some do not. If your graphics card hasn't 
  been assigned an IRQ, programs that use Matrox bus mastering may not 
  work properly. For more information, see your Matrox or system manual.

  The Millennium graphics card doesn't support bus mastering. Also, some 
  older computers may not support bus mastering at all.

- Adobe Type Manager limitation

  With Adobe Type Manager installed, you cannot run the driver if
  the "Advanced Graphics Acceleration Settings" is set to none. Note
  that ATM is installed as part of Adobe Acrobat Reader. This is an
  Adobe problem documented in the Windows 95/98 "display.txt" file.

- Monitors in interlaced mode

  Some older monitors such as the NEC 3D and many "SuperVGA" monitors
  do not support non-interlaced mode in all resolutions. The Matrox display 
  driver does not properly handle interlaced mode with the Windows 95/98 
  monitor selection method. If you have one of these monitors, please 
  use the Matrox Monitor selection method.

- DirectDraw and Automatic Power Management

  As stated in "Microsoft DirectX release Notes", September 30, 1995, a 
  DirectDraw game may be unable to restore properly if it is suspended 
  by Automatic Power Management utilities.

- Installation in different language versions of Windows 95/98

  If you install software in a language different from the language of 
  your operating system (for example, English software on a Japanese 
  system), you may have problems with text and dialog box controls being 
  cut off. This is because of differences in system fonts.

- Millennium 3D acceleration library

  The "Millennium 3D acceleration library" is no longer supported. (For
  users of the Millennium graphics card, this option was available in 
  previous versions of Matrox PowerDesk for Windows 95.) The performance
  of a few older 3D programs may be affected. 3D acceleration is
  supported for programs that use DirectX.

- TV output mode

  Certain models of Matrox graphics cards support TV output. When TV
  output mode is enabled with Matrox PowerDesk software, some computer
  monitors may become garbled or unusable. This may happen with a
  computer monitor that only supports a maximum resolution of 
  1024 x 768 or lower. 

  If this happens, simply turn off your computer monitor and use your
  TV to view your computer display. Your computer monitor will work 
  normally when you disable TV output mode.

  Note: The Matrox zoom and virtual desktop features aren't supported 
  in TV output mode

- VESA modes:

  DOS programs running in DOS full-screen mode are handled by the 
  Matrox Video BIOS. The BIOS supports all standard VGA modes, AND many
  VESA VBE 1.2 and 2.0 modes:

     VESA Graphics Modes
  Mode   Resolution  Colors            
  
  100h   640x400     256        
  101h   640x480     256 
  110h   640x480     32K
  111h   640x480     64K
  112h   640x480     16.8M
  102h   800x600     16
  103h   800x600     256
  113h   800x600     32K
  114h   800x600     64K
  115h   800x600     16.8M
  105h   1024x768    256
  116h   1024x768    32K
  117h   1024x768    64K
  118h   1024x768    16.8M(*)
  107h   1280x1024   256
  119h   1280X1024   32K(*)
  11Ah   1280X1024   64K(*)
  11Ch   1600X1200   256
  11Dh   1600X1200   32K(*)
  11Eh   1600X1200   64K(*)

  (*) requires 4Mb memory

       Text Modes
  Mode   Columns     Rows

  108h      80         60
  109h     132         25
  10Bh     132         50
  10Ch     132         60



Matrox Diagnostic program
-------------------------

Restart your computer and close all other programs before running Matrox
Diagnostic. 

The Matrox Diagnostic program tests the bus mastering feature of your 
system and if another program is using bus mastering at the same time (a 
3D game for example), a system error may occur.



IRQSET.EXE program
------------------

If you have a 3D program for Windows 95/98 that doesn't start or stops 
running, you may be having a problem with bus mastering. The Matrox card
needs an Interrupt Request (IRQ) number for bus mastering to work
properly and some computers do not automatically give the Matrox card an
IRQ. You can manually assign your Matrox card an IRQ through the 
IRQSET.EXE program we provide.

First, check for an IRQ number:

  (1) Right-click "My Computer" on the Windows desktop background.
  (2) Click the "Properties" menu item.
  (3) Click the "Device Manager" tab.
  (4) Click the "Properties" button.
  (5) Check if the Matrox display driver appears in the IRQ list. 
      If it does, there is no need to manually assign an IRQ and you
      can stop here.
      IF NOT, note which IRQ number (10, 11 or 12) is not used and 
      continue with the instructions below.

To manually assign an IRQ (PCI graphics card only):

  (1) Open your "autoexec.bat" file with the Windows 95/98 Notepad program.
      Your autoexec.bat file is in the root directory of your boot 
      drive.

  (2) Add a line to your autoexec.bat with the path to "IRQSET", 
      followed by the IRQ you want to use (the unused number you noted 
      above). For example, to assign your Matrox card IRQ 10, insert the
      following line in your autoexec.bat (INCLUDING the quotation 
      marks):

           C:"\Program Files\Matrox MGA PowerDesk\IRQSET" -i A

      (The path you use MIGHT be different if you have a customized 
      installation of Matrox PowerDesk on your computer.)

      The above example is for IRQ 10. To use a different IRQ, replace
      "A" with ONE of the following letters (capitalized):

          B (for IRQ 11)
          C (for IRQ 12)

  (3) Save the changes to the autoexec.bat and exit Notepad.

  (4) Restart your computer for the changes to take effect.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.37