CLIENT32.TXT Driver File Contents (EN1207F.zip)

*******************************************************************
*                  ACCTON TECHNOLOGY CORPORATION                  *
*           EN1207F/EN2242 SERIES FAST ETHERNET ADAPTER           *
*          NetWare Client32 Driver Installation Overview          *
*                                                                 *
*       Copyright (C) 2001 by Accton Technology Corporation.      *
*                      All rights reserved.                       *
*******************************************************************

Contents:
                A. File Description
                B. Driver Installation for NetWare Server 3.1x, 4.x
                C. Driver Installation for DOS32
                D. Driver Installation for Microsoft Windows 3.x
                E. Driver Installation for Microsoft Windows 95
                F. Parameter Description for ACCODI.LAN


A. File Description
--------------------

-------------------------------------------------------------------------------
Filename              Description
-------------------------------------------------------------------------------
CLIENT32.TXT          This file. Presents a summary of the contents for
                      NetWare Client32 driver installation.

EN5251.LAN            Accton Client32 ODI driver for EN5251 Based Fast 
		      Ethernet adapter. This driver complies with NetWare 
		      ODI Server driver SPEC 3.31.

EN5251.LDI           The (EN5251.LAN) driver installation information
                      file for NetWare Server 4.X, NeDOS32, Windows 3.x.

EN5251.INF           The (EN5251.LAN) driver installation information
                      file for Microsoft Windows 95.

-------------------------------------------------------------------------------




B. Driver (Spec. 3.31) Installation for NetWare Server 3.1x, 4.x

    B.1 Driver Installation for NetWare Server 3.12

         1. Insert Accton's EN5251 Based Fast Ethernet Adapter Driver
            Diskette in your PC's floppy drive (A: or B:).
         2. Change to the NetWare Server directory (for example:
            CD\SERVER.312)
         3. Copy the following files from the Driver Diskette to the NetWare
            Server directory.

                   \NetWare\ODI\SERVER\3.12\NBI31X.NLM
                   \NetWare\ODI\SERVER\3.12\MSM31X.NLM
                   \NetWare\ODI\SERVER\ETHERTSM.NLM
                   \LANDRV32\EN5251.LAN

         4. Sample AUTOEXEC.NCF for NetWare Server 3.12

             AUTOEXEC.NCF
             ============
                LOAD C:NBI31X
                LOAD C:MSM31X
                LOAD C:ETHERTSM
                LOAD C:EN5251 FRAME=ETHERNET_802.2 NAME=E_8022
                LOAD C:EN5251 FRAME=ETHERNET_802.3 NAME=E_8023
                LOAD C:EN5251 FRAME=ETHERNET_II NAME=E_II
                LOAD C:EN5251 FRAME=ETHERNET_SNAP NAME=E_SNAP
                BIND IPX E_8022 NET=10
                BIND IPX E_8023 NET=20
                BIND IPX E_II   NET=30
                BIND IPX E_SNAP NET=40


    B.2 Driver Installation for NetWare Server 4.X

         1. Change to the NetWare Server directory (for example:
            CD\NWSERVER )
         2. Load the NetWare Server System by typing SERVER, then press 
            <Enter>.
         3. When the Server prompt appears, load the NetWare Server
            Installation Utility.  That is,

                :LOAD INSTALL

         4. Select "Driver options" from the "Installtion Options" menu,
	    then press <Enter>.
         5. Select "Configure network drivers" from the "Driver Options"
            menu, then press <Enter>.
         6. Select "Select a driver" from the "Additional Driver Actions"
            menu, then press <Enter>.
         7. Press <Ins> to install a unlisted driver, then press <F3> to
            specify a different path.
         8. Insert Accton's EN5251 Based Fast Ethernet Adapter Driver 
	    Diskette 
            in your PC's floppy drive and specify the drive path 
            "A:\landrv32"
         9. Select "Accton EN5251 Fast Ethernet Driver" from the
            "Select a driver to installed:" menu, then press <Enter>.
        10. If necessary, select "Select/Modify driver parameters and
            protocols" from the "Board EN5251 (Driver EN5251) Actions"
            menu, then press <Enter> to setup the driver parameters.
            (Please refer to content G.) Otherwise, select
            "Save parameters and load driver", then press <Enter>.

        11. Following screen instructions to complete driver installation.

        12. Sample AUTOEXEC.NCF for NetWare Server 4.X

             AUTOEXEC.NCF (one board)
             ========================
              LOAD C:NBI
              LOAD C:MSM
              LOAD C:ETHERTSM
              LOAD C:EN5251 FRAME=ETHERNET_802.2 NAME=E_8022
              LOAD C:EN5251 FRAME=ETHERNET_802.3 NAME=E_8023
              LOAD C:EN5251 FRAME=ETHERNET_II NAME=E_II
              LOAD C:EN5251 FRAME=ETHERNET_SNAP NAME=E_SNAP
              BIND IPX E_8022 NET=10
              BIND IPX E_8023 NET=20
              BIND IPX E_II   NET=30
              BIND IPX E_SNAP NET=40

             AUTOEXEC.NCF (two boards)
             =========================
              LOAD C:NBI
              LOAD C:MSM
              LOAD C:ETHERTSM
              LOAD C:EN5251 PCI_SLOT=3 FRAME=ETHERNET_802.2 NAME=E_8022_1
              LOAD C:EN5251 PCI_SLOT=3 FRAME=ETHERNET_802.3 NAME=E_8023_1
              LOAD C:EN5251 PCI_SLOT=3 FRAME=ETHERNET_II NAME=E_II_1
              LOAD C:EN5251 PCI_SLOT=3 FRAME=ETHERNET_SNAP NAME=E_SNAP_1
              LOAD C:EN5251 PCI_SLOT=4 FRAME=ETHERNET_802.2 NAME=E_8022_2
              LOAD C:EN5251 PCI_SLOT=4 FRAME=ETHERNET_802.3 NAME=E_8023_2
              LOAD C:EN5251 PCI_SLOT=4 FRAME=ETHERNET_II NAME=E_II_2
              LOAD C:EN5251 PCI_SLOT=4 FRAME=ETHERNET_SNAP NAME=E_SNAP_2
              BIND IPX E_8022_1 NET=10
              BIND IPX E_8023_1 NET=20
              BIND IPX E_II_1   NET=30
              BIND IPX E_SNAP_1 NET=40
              BIND IPX E_8022_2 NET=50
              BIND IPX E_8023_2 NET=60
              BIND IPX E_II_2   NET=70
              BIND IPX E_SNAP_2 NET=80


C. Driver Installation for DOS32

    1. If you have finished installing the NetWare Client 32 for DOS,
       all you have to do is modify STARTNET.BAT.  Please see the
       sample STARTNET.BAT beneath these installation instructions.

    2. Run INSTALL.EXE from NetWare DOS 32 diskette 1 (or from NetWare
       4.11 CD). When the product manual appears, mark the "NetWare
       Client 32 for DOS" item, then press <Enter>.

    3. Select the "OTHER DRIVERS" item from the "32-bit Network Board 
       Drivers" menu, then press <Enter>.

    4. Insert Accton's EN5251 Based Driver Diskette into your floppy diskette
       drive, then specify the driver path, like A:\LANDRV32 or B:

    5. Select "Accton EN5251 Based Fast Ethernet Fast Ethernet Driver", then 
       press <Enter>.

    6. Refer to Content G. and set the correct driver parameters to
       comply with your network environment, then press <F10> to continue.

    7. Following screen instructions to complete Client32 for DOS software
       installation.

    8. Reboot your machine.

    Sample STARTNET.BAT for DOS32.
    ==============================
       SET NWLANGUAGE=ENGLISH
       C:\NOVELL\CLIENT32\NIOS.EXE
       LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
       LOAD C:\NOVELL\CLIENT32\CMSM.NLM
       LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
       LOAD C:\NOVELL\CLIENT32\EN5251.LAN FRAME=ETHERNET_802.2
       LOAD C:\NOVELL\CLIENT32\EN5251.LAN FRAME=ETHERNET_802.3
       LOAD C:\NOVELL\CLIENT32\EN5251.LAN FRAME=ETHERNET_II
       LOAD C:\NOVELL\CLIENT32\EN5251.LAN FRAME=ETHERNET_SNAP
       LOAD C:\NOVELL\CLIENT32\IPX.NLM
       LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM

       NOTICE!! C:\NOVELL is the directory where your Novell Client 32
                files are located.


D. Driver Installation for Microsoft Windows 3.x

    Please refer to Content CD., in step 2, mark "NetWare Client 32
    for DOS" and "Client 32 for Windows", then follow step 3...8
    to complete installation.


E. Driver Installation for Microsoft Windows 95

    If you have installed the Microsoft Client in your Windows 95
    system, you should remove the adapter object and NDIS3 driver
    for the EN5251 Based Fast Ethernet Adapter from the Windows 95 
    system.

     1. Plug Accton's EN5251 based adapter into one of the Master PCI
        slots of your PCI platform.
     2. Turn the power ON, then boot from Windows 95.
     3. Windows 95 will prompt with "PCI Ethernet Controller" in the
        "New Hardware Found" dialog box.
     4. Select "Driver from disk provided by hardware manufacturer"
        from the "New Hardware Found" dialog box, then click the OK button.
     5. Insert the Accton EN5251 Based Driver Diskette in your floppy
        drive.
     6. Enter the driver pathname A:\LANDRV32, then click the OK button
        in the "Install from Disk" dialog box.
     7. Follow the screen's prompt to insert the "NetWare Client 32 for
        Windows 95" disk and click the OK button in the "Insert Disk"
        dialog box.
     8. Otherwise enter the full pathname for the "NetWare Client 32 for
        Windows 95" installation files in the "Copying Files....." dialog
        box, then click the OK button.
     9. Follow the screen's prompt to insert the "Windows 95 CD-ROM"
        and click the OK button in the "Insert Disk" dialog box.
    10. Otherwise enter the full pathname of the "Windows 95 CD-ROM"
        installation files in the "Copying Files..." dialog box,
        then click the OK button.
    11. Windows 95 will copy the driver (EN5251.LAN) from A:\LANDRV32
        to the C:\NOVELL\CLIENT32 directory and the EN5251.INF file
        from A:\LANDRV32 to the C:\WINDOWS\INF directory.
    12. Remove the Accton EN5251 Based Driver Diskette from your floppy 
        drive.
    13. Restart your computer to initialize the network function.


    NOTICE!! C:\NOVELL is the directory where your Novell Client 32
             files are located.
             C:\WINDOWS is the directory where your Windows 95 O.S.
             is located.


F. Parameter Description for EN5251.LAN

        The following parameters are used in EN5251.LAN.

    1. SLOT        : specifies which adapter is enabled when multiple EN5251 
                   Based adapters are found in your computer.  The SLOT keyword 
                   is an index value corresponding to PCI BIOS.  The mapping 
                   from SLOT to the physical PCI slot is different from one 
                   machine to another.

                   Ex: LOAD EN5251 SLOT=3 FRAME=ETHERNET_802.2
                       LOAD EN5251 SLOT=4 FRAME=ETHERNET_II

    2. FRAME       : specifies which frame type is used by the driver.  Accepted
                   values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and
                   Ethernet_SNAP.  Multiple frame types can be enabled by
                   loading the same driver with different FRAME types.

                   Ex: LOAD EN5251 FRAME=ETHERNET_802.2
                       LOAD EN5251 FRAME=ETHERNET_802.3
                       LOAD EN5251 FRAME=ETHERNET_II
                       LOAD EN5251 FRAME=ETHERNET_SNAP

    3. NODE    	   : Uses a different address to replace the node address burned
                   in EEPROM.

                   Ex: LOAD EN5251 NODE=0000E8001122

    4. Media_Type  : Specifies which medium type is used by the driver.
                   Accepted vaules are AUTO,10-HD,10-FD,100-HD,
                   100-FD.

                   Ex: LOAD EN5251 SLOT=3 FRAME=ETHERNET_802.2 Medium=100-FD


---
All trademarks and brand names mentioned belong to their
respective owners.


-- End of File --

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.40