WINNT/OEMSETNT.INF Driver File Contents (pcmpc100.exe)

Driver Package File Name: pcmpc100.exe
File Size: 626.7 KB

;***********************************************************************
;
;       PCMCIA EtherFast PC Card driver SETUP file.
;
;       OEMSETNT.INF
;
;***********************************************************************


[Identification]
    OptionType = NetAdapter


[PlatformsSupported]
    ISA
    EISA
    "Jazz-Internal Bus"
    PCMCIA

;;+Softex
[Options]
    PC100
;;-Softex

[OptionsSoftexNT4]
    PC100

[OptionsSoftexNT3]
    PC100
    PC100A

;***********************************************************************
; CONSTANTS FOR USING DIALOGS
;***********************************************************************

[FileConstants]


GenericInfVersion   = "v1.0"
GenericAdapterName  = "Linksys EtherFast 10/100 PC Card (PCMPC100 V3) Adapter"
GenericDriverName   = "Linksys EtherFast 10/100 PC Card (PCMPC100 V3) Driver"
GenericFunctionName = "Linksys EtherFast 10/100 PC Card (PCMPC100 V3) Adapter"
GenericSysName      = "PC100.SYS"
GenericName         = "PC100"



;
;  File names, etc.
;
UtilityInf      = "UTILITY.INF"
ParamInf        = "NCPARAM.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0

NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"

Manufacturer    = "Microsoft"
ProductMajorVersion     = "3"
ProductMinorVersion     = "1"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

ProductSoftwareName     = "PC100"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType     = "PC100Sys ndisDriver PC100Driver"

NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """PC100Sys"" yes no container"

NetRuleSoftwareClass    = {"PC100Driver basic"}
NetRuleSoftwareBindable = {"PC100Driver PC100Adapter non exclusive 100"}

ProductHardwareName        = "PC100"
NetRuleHardwareType        = "PC100 PC100Adapter"
NetRuleHardwareBindForm    = " yes yes container"
NetRuleHardwareClass       = {"PC100Adapter basic"}



ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

PCCardDataBase = $(!NTN_ServiceBase)"\Pcmcia\DataBase"
NICDataBase = $(PCCardDataBase)"\Linksys\EtherFast 10/100 PC Card (PCMPC100)"
NICDataBase1 = $(PCCardDataBase)"\Linksys\EtherFast 10/100 PC Card (PCMPC100 V2)"
NICDataBase2 = $(PCCardDataBase)"\Linksys\EtherFast 10/100 PC Card (PCMPC100 V3)"

;+ For CardWizard 1-16-98
CardwizDataBase = $(!NTN_ServiceBase)"\resman\MacDataBase"
CWZNICDataBase = $(CardwizDataBase)"\Linksys\EtherFast 10/100 PC Card (PCMPC100)"
CWZNICDataBase1 = $(CardwizDataBase)"\Linksys\EtherFast 10/100 PC Card (PCMPC100 V2)"
CWZNICDataBase2 = $(CardwizDataBase)"\Linksys\EtherFast 10/100 PC Card (PCMPC100 V3)"

;- For CardWizard 1-16-98
;;+Softex
SoftexPCCard = $(!NTN_ServiceBase)"\CardS"
;;-


[GeneralConstants]
from      = ""
to        = ""

ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2

KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
KeyPCCard       = ""
KeyDataBase     = ""
NT400VersionConstant = "(4.0)"

TRUE            = 1
FALSE           = 0
NoTitle         = 0

ExitState   = "Active"
OldVersionExisted = $(FALSE)

DriverPath      = $(!STF_NTPATH)\drivers

[date]
    ; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
    ; Minute, Second }
    Now = {} ? $(!LIBHANDLE) GetSystemDate



[Identify]
    ;
    ;
    read-syms Identification


    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)

    set STF_DISPLAYDEBUGOUTPUT  =   1

    Return $(Status) $(Identifier) $(Media) $(STF_DISPLAYDEBUGOUTPUT)


[ReturnOptions]
    ;
    ;
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}

    ;
    ; Check if the language requested is supported
    ;

    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ;
        ; Check if the platforms requested is supported
        ;
        ifstr(i) $($1) == ""
                        goto returnoptions
        endif

        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
                        goto returnoptions
        else
                        set Status = STATUS_NOTSUPPORTED
                        goto finish_ReturnOptions
        endif
    else
                set Status = STATUS_NOLANGUAGE
                goto finish_ReturnOptions
    endif

    ;
    ; form a list of all the options and another of the text representing
    ;

returnoptions = +

;;+Softex
    set PCCardOption = "Softex"
    OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\CardS" $(MAXIMUM_ALLOWED) KeySoftexPCCard
    ifstr $(KeySoftexPCCard) == $(KeyNull)
        goto readoptions
    endif
    set PCCardOption = ""
    CloseRegKey $(KeySoftexPCCard)
readoptions = +
;;-Softex

    set NT_VER = "NT3"

    OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Enum" $(!REG_KEY_READ) KeyNT
    ifstr $(KeyNT) == $(KeyNull)
        goto DetectOK
    endif
    CloseRegKey $(KeyNT)
    set NT_VER = "NT4"

DetectOK = +
;;+Softex
    ifstr $(PCCardOption) == ""
       set OptionList     = ^(Options$(PCCardOption), 1)
       set OptionTextList = ^(OptionsText$($0)$(PCCardOption), 1)
    else
       set OptionList     = ^(OptionsSoftex$(NT_VER), 1)
       set OptionTextList = ^(OptionsText$($0)Softex$(NT_VER), 1)
    endif
;;-Softex
    set Status         = STATUS_SUCCESSFUL

finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

[InstallOption]
    ;
    ; Set default values for
    ;
    set Status   = STATUS_FAILED
    ;
    ; extract parameters
    ;
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif

    set-subst LF = "\n"

    read-syms GeneralConstants
    read-syms FileConstants

    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = $(OK)
    endif

    set CurrentVersionValue = ""
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt

    Ifstr(i) $(KeyNt) != ""
        GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue
        CloseRegKey $(KeyNt)
    Endif

    ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
      set NT_VER = NT4
      OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Enum\Root\LEGACY_PCMCIA\0000" $(!REG_KEY_READ) KeyPCMCIA
      Ifstr(i) $(KeyPCMCIA) != ""
         GetRegValue $(KeyPCMCIA) "StatusFlags" PCMCIAFlag
         CloseRegKey $(KeyPCMCIA)
         set PCMCIAStatusFlag = *($(PCMCIAFlag), 4)
      Endif
    else
      set NT_VER = NT3
    endif

;;+Softex
    set PCCardOption = "Softex"
    OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\CardS" $(MAXIMUM_ALLOWED) KeySoftexPCCard
    ifstr $(KeySoftexPCCard) == $(KeyNull)
        goto readoptions
    endif
    set PCCardOption = ""
    CloseRegKey $(KeySoftexPCCard)
readoptions = +
;;-Softex

;;+Softex
    read-syms FileConstants$(!STF_LANGUAGE)$(PCCardOption)
;;-Softex

    detect date

    set-title  $(FunctionTitle)

    set to   = Begin
    set from = Begin
;
;  Assume all is well.
;
    set CommonStatus = STATUS_SUCCESSFUL

    EndWait

;
;   Set up the operation-mode-based variables and gaily welcome
;   the user.  If the "install mode" variable is improperly set,
;   assume this is a new installation.
;

Begin = +
    Set ActivateDetection = FALSE

    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
;        set ActivateDetection = TRUE
        set StartLabel = configureadapter
        ;
        ;   You cannot config the software component
        ;
        Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
            Debug-Output "Cannot configure the driver software."
            Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error: cannot get an error string."
                goto ShellCodeError
            endif
            set Error = $($R0)
            set from = end
            set to = end
            goto nonfatalinfo
        endif
    else
;        set ActivateDetection = TRUE
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
    endif


    ;  set the default values

    ; IRQ Level = 5
;;+Softex
    ifstr $(PCCardOption) == ""
        set IRQValue = *($(IRQList), 1)
    else
        set IRQValue = *($(IRQList), 3)
    endif
;;-Softex

    ; IOBase Address = 0x300
    set IOBaseAddrValue = *($(IOBaseAddrList), 1)


    ; Memory Address = 0xd0000
;;+Softex
    ifstr $(PCCardOption) == ""
        set MemAddrValue = *($(MemAddrList), 1)
    else
        set MemAddrValue = *($(MemAddrList), 3)
    endif
;;-Softex

    ; Connection Type = Auto_Sense
    set ConnectionValue = *($(ConnectionList), 0)

    Set from = $(fatal)
    Set to = $(fatal)
    Goto $(StartLabel)

;-----------------------------------------------
; Installation Section
;-----------------------------------------------

installadapter = +
;
;   First, check whether the same version of the software exists
;
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

    Ifstr $(KeyProduct) != $(KeyNull)
        ;
        ; Same version already existed in the local machine
        ; Popup the dialog and ask the user whether he wants to continue
        ;
        CloseRegKey $(KeyProduct)

        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           ;
           ; Cannot Install the same software again
           ;
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif

           goto end
        else
           ;
           ; Add a new adapter card?
           ;
           Shell $(UtilityInf), CardExistedDlg

           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif

           ifstr(i) $($R1) != "OK"
               goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    endif

;
;  dll load addition
;
    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES

    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Goto ShellCodeError
    Else-Ifstr(i) $($R0) == STATUS_FAILED
        Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
        Goto fatal
    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
        Goto successful
    Endif

;   Set SrcDir = $($R1)WINNT\
    Set SrcDir = $($R1)

    install "Install-Dll"

    goto adaptersetup

;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
;   Get the current values of all the parameters
;
configureadapter = +
    Ifstr $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
            Debug-Output "Cannot find component product key"
            goto fatalregistry
        Endif
    Endif

    ;
    ; Get the other parameters;  they're attached to the service parameters key
    ;
    Debug-Output "INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "INF: FindService shell failure"
        Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
        Debug-Output "INF: FindService Shell error: "$($R0)
        Goto fatalregistry
    endif

    Set KeyParameters = $($R2)

    ;
    ;  We don't need the services key, so close it.
    ;
    CloseRegKey $($R1)

    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        Debug-Output "Cannot find component service"
        goto fatalregistry
    endif

    set OldVersionExisted = $(TRUE)

    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}


    ;
    ; Get the old values
    ;
    EnumRegValue $(KeyParameters) ValueList

    Debug-Output $(InfName)" KeyParameters is "$(KeyParameters)

    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        ifstr(i) $(ValueName) == "IoBaseAddress"
            set IOBaseAddrIndex = $(ValueData)
;Kenny
        else-ifstr(i) $(ValueName) == "InterruptNumber"
            set IRQValueIndex = $(ValueData)
        else-ifstr(i) $(ValueName) == "PCCARDAttributeMemoryAddress"
            set MemAddrIndex = $(ValueData)
        else-ifstr(i) $(ValueName) == "ConnectionType"
            set ConnectionIndex = $(ValueData)
;;+Softex
        else-ifstr(i) $(ValueName) == "AdapterName"
            set OldAdapterName = $(ValueData)
;;-Softex
        endif

    EndForListDo


    Debug-Output $(InfName)" IRQ_Level is "$(IRQValue)
    Debug-Output $(InfName)" I/o base is "$(IOBaseAddrValue)
    Debug-Output $(InfName)" Mem base is "$(MemAddrValue)

    set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex)))

    ifstr(i) $(IRQValue) == ""
        set IRQValue = *($(IRQList), 3)
Debug-Output $(InfName)" IRQ_Level is "$(IRQValue)
    endif

    set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex)))

    ifstr(i) $(IOBaseAddrValue) == ""
        set IOBaseAddrValue = *($(IOBaseAddrList), 1)
    endif


    set MemAddrValue = *($(MemAddrList), ~($(MemAddrValues),$(MemAddrIndex)))

    ifstr(i) $(MemAddrValue) == ""
        set MemAddrValue = *($(MemAddrList), 1)
    endif


    set SlotValue = *($(SlotList), ~($(SlotValues),$(SlotValueIndex)))
    ifstr(i) $(SlotValue) == ""
        set SlotValue = *($(SlotList), 1)
    endif

    set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
    ifstr(i) $(ConnectionValue) == ""
        set ConnectionValue = *($(ConnectionList), 1)
    endif


    ;  Save the settings as they were read from the Registry.

;    Shell $(ParamInf) Param_SaveValues
;    Set CurrParamSettings = $($R0)
;
;   Put up the adapter configuration dialog if necessary.
;
;   Note that $(CurrParamSettings) has the old known parameter values.
;
adaptersetup = +


;    Shell "" DebugConfiguration "before displaying dialog"

    Set from = adapteroptions


adapteroptions = +


    LoadLibrary "landisk" $(DialogDllName) hLib

    read-syms FileDependentDlg$(!STF_LANGUAGE)

    Debug-Output $(InfName)" I/o base is "$(IOBaseAddrValue)



    ui start "InputDlg"  $(hLib)

    set ExitButton      = $(ButtonPressed)

    Debug-Output " ButtonPressed "$(ButtonPressed)


    FreeLibrary $(hLib)

    ifstr(i) $(DLGEVENT) == "CONTINUE"
                set IOBaseAddrIndex = $(Combo1Out)
                set IRQValueIndex = $(Combo2Out)
                set MemAddrIndex = $(Combo3Out)
                set ConnectionIndex = $(Combo4Out)
                set ExitButton      = $(ButtonPressed)

                ui pop 1

    else-ifstr(i) $(DLGEVENT) == "EXIT"
                set CommonStatus = STATUS_USERCANCEL
                Debug-Output "Action: exit. Bye."
                ui pop 1
                goto end
    else
                ;
                ; Unknow command
                ;
                ui pop 1


                Debug-Output "Action: unknown. Bye."
                goto end
    endif

    Debug-Output " Combo list out "$(ComboListItemsOut)


;
;   If installing, go create the necessary keys;
;   if configuring, they're already open.
;
skipoptions =+

    ifint $(OldVersionExisted) == $(TRUE)
        ifstr(i) $(!NTN_InstallMode) == configure
            goto writeparameters
        endif
    endif
    StartWait
    ;
    ; Add Software Component
    ;
    ifint $(OldVersionExisted) == $(FALSE)

        ifstr(i) $(!NTN_InstallMode) == "install"
           Ifstr(i) $(DoCopy) == "YES"

              Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES

              Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  Goto ShellCodeError
              Else-Ifstr(i) $($R0) == STATUS_FAILED
                  Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                  ifint $($ShellCode) != $(!SHELL_CODE_OK)
                      goto ShellCodeError
                  endif
                  set Error = $($R0)
                  Goto fatal
              Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                  Goto successful
              Endif

;             Set SrcDir = $($R1)WINNT\
              Set SrcDir = $($R1)

           Endif

           install "Install-Option"

           ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
              Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
              ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  goto ShellCodeError
              endif
              set Error = $($R0)
              goto fatal
           endif
        endif



        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
            $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
            $(NetEventDLL)

        Set OEM_ABANDON_SOFTWARE = TRUE

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        ;
        ;   At this point:
        ;     $R1 contains the product version key handle;
        ;     $R2 contains the NetRules subkey handle;
        ;     $R3 contains the new Services key handle; and
        ;     $R4 contains the Parameters key
        ;     $R5 contains the Linkage Key
        ;
        set RegistryErrorIndex = $($R0)
        set KeyProduct      = $($R1)
        Set SoftNetRulesKey = $($R2)
        CloseRegKey $($R3)
        CloseRegKey $($R4)
        CloseRegKey $($R5)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "Registry error: add software components"
            CloseRegKey $(KeyProduct)
            CloseRegKey $(SoftNetRulesKey)
            goto fatalregistry
        endif

        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

        Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error."
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "Registry error: add value list."
            CloseRegKey $(KeyProduct)
            CloseRegKey $(SoftNetRulesKey)
            goto fatalregistry
        endif

        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                            {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

        Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error."
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "Resgitry error: add value list."
            goto fatalregistry
        endif
    endif
;
;   Create the HARDWARE\Netcard region and its corresponding service
;
    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)

    ifint $($R4) != -1
        Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "Cannot add hardware component"
        goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Registry error: add hardware component"
        CloseRegKey $($R1)
        CloseRegKey $($R2)
        CloseRegKey $($R3)
        goto fatalregistry
    endif

    set KeyParameters = $($R3)
    set KeyAdapterRules = $($R2)
    set AdapterNumber = $($R4)

    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error"
        goto ShellCodeError
    endif

    CloseRegKey $($R1)

    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)

    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Resgitry error: add value list."
        CloseRegKey $(KeyParameters)
        CloseRegKey $(KeyAdapterRules)
        goto fatalregistry
    endif

    CloseRegKey $(KeyAdapterRules)

    goto writeparameters
;
;   REQUIRED:   $(KeyParameters) contains service Parameters key handle
;
writeparameters = +
    Shell $(UtilityInf), GetBusTypeNum
    set BusTypeNum = $($R1)
; Testing the BusNum. We are coding it to 0
    set BusNumValue = 0 ;
; End of BusNum
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
    endif


    set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))

    set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrIndex)))

    set MemAddrValue = *($(MemAddrValues), ~($(MemAddrList),$(MemAddrIndex)))

    set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
;;+Softex
    ifstr $(OldAdapterName) == ""
            set OldAdapterName = $(ProductHardwareName)$(AdapterNumber)
    endif
;;-Softex

;+ For CardBus slot
;;+Softex
    ifstr $(PCCardOption) == ""
;;-Softex
;- For CardBus slot

    set NewValueList = {{IoBaseAddress,  $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
                        {IoLength,  $(NoTitle),$(!REG_VT_DWORD),32},+
                        {BusType,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {BusNumber,  $(NoTitle),$(!REG_VT_DWORD),$(BusNumValue)},+
                        {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
;;+Softex
                        {SoftexPcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {AdapterName,$(NoTitle),$(!REG_VT_SZ),$(OldAdapterName)}, +
;;-Softex
                        {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+
                        {InterruptNumber,  $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
                        {ConnectionType,  $(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)},+
                        {PCCARDAttributeMemoryAddress,  $(NoTitle),$(!REG_VT_DWORD),$(MemAddrValue)},+
                        {PCCARDAttributeMemoryOffset,  $(NoTitle),$(!REG_VT_DWORD),0},+
                        {PCCARDAttributeMemorySize,  $(NoTitle),$(!REG_VT_DWORD),1024},+
                        {Slot,  $(NoTitle),$(!REG_VT_DWORD),$(SlotValue)}}

;+ For CardBus slot
    else
     ifstr(i) $(NT_VER) == "NT4"
      ifint $(PCMCIAStatusFlag) == 8
       set NewValueList = {{IoBaseAddress,  $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
                        {IoLength,  $(NoTitle),$(!REG_VT_DWORD),31},+
                        {BusType,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {BusNumber,  $(NoTitle),$(!REG_VT_DWORD),$(BusNumValue)},+
                        {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+
                        {InterruptNumber,  $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
                        {ConnectionType,  $(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)},+
                        {PCCARDAttributeMemoryAddress,  $(NoTitle),$(!REG_VT_DWORD),$(MemAddrValue)},+
                        {PCCARDAttributeMemoryOffset,  $(NoTitle),$(!REG_VT_DWORD),0},+
                        {PCCARDAttributeMemorySize,  $(NoTitle),$(!REG_VT_DWORD),1024},+
                        {Slot,  $(NoTitle),$(!REG_VT_DWORD),$(SlotValue)}}
      else
       set NewValueList = {{IoBaseAddress,  $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
                        {IoLength,  $(NoTitle),$(!REG_VT_DWORD),31},+
                        {BusType,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {BusNumber,  $(NoTitle),$(!REG_VT_DWORD),$(BusNumValue)},+
                        {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {Pcmcia,$(NoTitle),$(!REG_VT_DWORD),0},+
                        {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+
                        {InterruptNumber,  $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
                        {ConnectionType,  $(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)},+
                        {PCCARDAttributeMemoryAddress,  $(NoTitle),$(!REG_VT_DWORD),$(MemAddrValue)},+
                        {PCCARDAttributeMemoryOffset,  $(NoTitle),$(!REG_VT_DWORD),0},+
                        {PCCARDAttributeMemorySize,  $(NoTitle),$(!REG_VT_DWORD),1024},+
                        {Slot,  $(NoTitle),$(!REG_VT_DWORD),$(SlotValue)}}
      endif
     else ;NT3
      ifstr(i) $(Option) == PC100

    set NewValueList = {{IoBaseAddress,  $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
                        {IoLength,  $(NoTitle),$(!REG_VT_DWORD),31},+
                        {BusType,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {BusNumber,  $(NoTitle),$(!REG_VT_DWORD),$(BusNumValue)},+
                        {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+
                        {InterruptNumber,  $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
                        {ConnectionType,  $(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)},+
                        {PCCARDAttributeMemoryAddress,  $(NoTitle),$(!REG_VT_DWORD),$(MemAddrValue)},+
                        {PCCARDAttributeMemoryOffset,  $(NoTitle),$(!REG_VT_DWORD),0},+
                        {PCCARDAttributeMemorySize,  $(NoTitle),$(!REG_VT_DWORD),1024},+
                        {Slot,  $(NoTitle),$(!REG_VT_DWORD),$(SlotValue)}}
      else
;+ For CardBus slot
    set NewValueList = {{IoBaseAddress,  $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
                        {IoLength,  $(NoTitle),$(!REG_VT_DWORD),31},+
                        {BusType,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {BusNumber,  $(NoTitle),$(!REG_VT_DWORD),$(BusNumValue)},+
                        {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {Pcmcia,$(NoTitle),$(!REG_VT_DWORD),0},+
                        {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+
                        {InterruptNumber,  $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
                        {ConnectionType,  $(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)},+
                        {PCCARDAttributeMemoryAddress,  $(NoTitle),$(!REG_VT_DWORD),$(MemAddrValue)},+
                        {PCCARDAttributeMemoryOffset,  $(NoTitle),$(!REG_VT_DWORD),0},+
                        {PCCARDAttributeMemorySize,  $(NoTitle),$(!REG_VT_DWORD),1024},+
                        {Slot,  $(NoTitle),$(!REG_VT_DWORD),$(SlotValue)}}

      endif
     endif
    endif
;- For CardBus slot

    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)

    CloseRegKey $(KeyParameters)

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        Debug-Output "Registry error: Add value list"
        goto fatalregistry
    endif

;+ For CardWizard 1-16-98
    OpenRegKey $(!REG_H_LOCAL) "" $(CardwizDataBase) $(MAXIMUM_ALLOWED) KeyCardwiz
    ifstr $(KeyCardwiz) == $(KeyNull)
        goto CardWizEnd
    endif

    OpenRegKey $(!REG_H_LOCAL) "" $(CWZNICDataBase) $(MAXIMUM_ALLOWED) KeyDataBase2
    ifstr $(KeyDataBase2) == $(KeyNull)
        CreateRegKey $(KeyCardwiz) {"Linksys\EtherFast 10/100 PC Card (PCMPC100)",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyDataBase2
        ifstr $(KeyDataBase2) == $(KeyNull)
            goto CardWizEnd
        endif
    endif

    Debug-Output "D65: Cardwiz Set Keyword value -- Driver"
    SetRegValue $(KeyDataBase2) {"MacDriverHandle",$(NoTitle),$(!REG_VT_DWORD),0}
    SetRegValue $(KeyDataBase2) {"MacDriverName",$(NoTitle),$(!REG_VT_SZ),"PC100"}
    SetRegValue $(KeyDataBase2) {"MacDriverState",$(NoTitle),$(!REG_VT_DWORD),1}
    SetRegValue $(KeyDataBase2) {"MacDriverVersion",$(NoTitle),$(!REG_VT_DWORD),0x300}
    SetRegValue $(KeyDataBase2) {"MacSwapCapability",$(NoTitle),$(!REG_VT_DWORD),2}

    CloseRegKey $(KeyDataBase2)
    CloseRegKey $(KeyCardwiz)

    OpenRegKey $(!REG_H_LOCAL) "" $(CardwizDataBase) $(MAXIMUM_ALLOWED) KeyCardwiz
    ifstr $(KeyCardwiz) == $(KeyNull)
        goto CardWizEnd
    endif

    OpenRegKey $(!REG_H_LOCAL) "" $(CWZNICDataBase1) $(MAXIMUM_ALLOWED) KeyDataBase2
    ifstr $(KeyDataBase2) == $(KeyNull)
        CreateRegKey $(KeyCardwiz) {"Linksys\EtherFast 10/100 PC Card (PCMPC100 V2)",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyDataBase2
        ifstr $(KeyDataBase2) == $(KeyNull)
            goto CardWizEnd
        endif
    endif

    Debug-Output "D65: Cardwiz Set Keyword value -- Driver"
    SetRegValue $(KeyDataBase2) {"MacDriverHandle",$(NoTitle),$(!REG_VT_DWORD),0}
    SetRegValue $(KeyDataBase2) {"MacDriverName",$(NoTitle),$(!REG_VT_SZ),"PC100"}
    SetRegValue $(KeyDataBase2) {"MacDriverState",$(NoTitle),$(!REG_VT_DWORD),1}
    SetRegValue $(KeyDataBase2) {"MacDriverVersion",$(NoTitle),$(!REG_VT_DWORD),0x300}
    SetRegValue $(KeyDataBase2) {"MacSwapCapability",$(NoTitle),$(!REG_VT_DWORD),2}

    CloseRegKey $(KeyDataBase2)
    CloseRegKey $(KeyCardwiz)

    OpenRegKey $(!REG_H_LOCAL) "" $(CardwizDataBase) $(MAXIMUM_ALLOWED) KeyCardwiz
    ifstr $(KeyCardwiz) == $(KeyNull)
        goto CardWizEnd
    endif

    OpenRegKey $(!REG_H_LOCAL) "" $(CWZNICDataBase2) $(MAXIMUM_ALLOWED) KeyDataBase2
    ifstr $(KeyDataBase2) == $(KeyNull)
        CreateRegKey $(KeyCardwiz) {"Linksys\EtherFast 10/100 PC Card (PCMPC100 V3)",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyDataBase2
        ifstr $(KeyDataBase2) == $(KeyNull)
            goto CardWizEnd
        endif
    endif

    Debug-Output "D65: Cardwiz Set Keyword value -- Driver"
    SetRegValue $(KeyDataBase2) {"MacDriverHandle",$(NoTitle),$(!REG_VT_DWORD),0}
    SetRegValue $(KeyDataBase2) {"MacDriverName",$(NoTitle),$(!REG_VT_SZ),"PC100"}
    SetRegValue $(KeyDataBase2) {"MacDriverState",$(NoTitle),$(!REG_VT_DWORD),1}
    SetRegValue $(KeyDataBase2) {"MacDriverVersion",$(NoTitle),$(!REG_VT_DWORD),0x300}
    SetRegValue $(KeyDataBase2) {"MacSwapCapability",$(NoTitle),$(!REG_VT_DWORD),2}

    CloseRegKey $(KeyDataBase2)
    CloseRegKey $(KeyCardwiz)

CardWizEnd = +
;- For CardWizard 1-16-98

    OpenRegKey $(!REG_H_LOCAL) "" $(PCCardDataBase) $(MAXIMUM_ALLOWED) KeyPCCard
    ifstr $(KeyPCCard) == $(KeyNull)
        goto NT350
    endif

    OpenRegKey $(!REG_H_LOCAL) "" $(NICDataBase) $(MAXIMUM_ALLOWED) KeyDataBase
    ifstr $(KeyDataBase) == $(KeyNull)
        CreateRegKey $(KeyPCCard) {"Linksys\EtherFast 10/100 PC Card (PCMPC100)",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyDataBase
        ifstr $(KeyDataBase) == $(KeyNull)
            Debug-Output "D65: Linksys\EtherFast 10/100 PC Card Can not Create"
            CloseRegKey $(KeyPCCard)
            goto fatalregistry
        endif
    endif

    SetRegValue $(KeyDataBase) {"AttributeMemorySize",$(NoTitle),$(!REG_VT_DWORD),4096}
    SetRegValue $(KeyDataBase) {"Driver",$(NoTitle),$(!REG_VT_SZ),"PC100"}
    SetRegValue $(KeyDataBase) {DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}

    CloseRegKey $(KeyDataBase)
    CloseRegKey $(KeyPCCard)

    OpenRegKey $(!REG_H_LOCAL) "" $(PCCardDataBase) $(MAXIMUM_ALLOWED) KeyPCCard
    ifstr $(KeyPCCard) == $(KeyNull)
        goto NT350
    endif

    OpenRegKey $(!REG_H_LOCAL) "" $(NICDataBase1) $(MAXIMUM_ALLOWED) KeyDataBase
    ifstr $(KeyDataBase) == $(KeyNull)
        CreateRegKey $(KeyPCCard) {"Linksys\EtherFast 10/100 PC Card (PCMPC100 V2)",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyDataBase
        ifstr $(KeyDataBase) == $(KeyNull)
            CloseRegKey $(KeyPCCard)
            goto fatalregistry
        endif
    endif

    SetRegValue $(KeyDataBase) {"AttributeMemorySize",$(NoTitle),$(!REG_VT_DWORD),4096}
    SetRegValue $(KeyDataBase) {"Driver",$(NoTitle),$(!REG_VT_SZ),"PC100"}
    SetRegValue $(KeyDataBase) {DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}

    CloseRegKey $(KeyDataBase)
    CloseRegKey $(KeyPCCard)

    OpenRegKey $(!REG_H_LOCAL) "" $(PCCardDataBase) $(MAXIMUM_ALLOWED) KeyPCCard
    ifstr $(KeyPCCard) == $(KeyNull)
        goto NT350
    endif

    OpenRegKey $(!REG_H_LOCAL) "" $(NICDataBase2) $(MAXIMUM_ALLOWED) KeyDataBase
    ifstr $(KeyDataBase) == $(KeyNull)
        CreateRegKey $(KeyPCCard) {"Linksys\EtherFast 10/100 PC Card (PCMPC100 V3)",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyDataBase
        ifstr $(KeyDataBase) == $(KeyNull)
            CloseRegKey $(KeyPCCard)
            goto fatalregistry
        endif
    endif

    SetRegValue $(KeyDataBase) {"AttributeMemorySize",$(NoTitle),$(!REG_VT_DWORD),4096}
    SetRegValue $(KeyDataBase) {"Driver",$(NoTitle),$(!REG_VT_SZ),"PC100"}
    SetRegValue $(KeyDataBase) {DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}

    CloseRegKey $(KeyDataBase)
    CloseRegKey $(KeyPCCard)

NT350 = +
    EndWait

    goto successful

;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal

;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------

removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        ; Remove Software Component
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif

    goto end

;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------

UpgradeSoftware = +
    ;
    ; First determine whether we want to do upgrade or update for software
    ; or hardware component. Then we will determine whether the Mode is
    ; update or upgrade.
    ;
    ; If the same version of the product existed in the registry, we do
    ; update. Otherwise, we will do a upgrade
    ;
    ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        ; Upgrade software component
        ;
        ; see whether the same version exist or not
        ;
        OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

        Ifstr $(KeyProduct) != $(KeyNull)
            GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
            set Version = *($(VersionInfo), 4)


            ;
            ; Update the binaries
            ;
            Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)

            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error"
                goto ShellCodeError
            endif

            set !UG_Filename = $($R0)

            ifstr(i) $(!UG_Filename) != ""
                install "Install-Update"
                ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                    goto fatal
                endif
            endif

            ; Upgrade the version number
            ;
            SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
            SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}

            ;
            ; do nothing for update
            ;
            ifint $(Version) != $(ProductVersion)
               ;
               ; If the major version number is not the same,
               ; it is major upgrade. So let Upgrade the product
               ;
               ;
               ; make other upgrade change if necessary
               ;
            endif
            CloseRegKey $(KeyProduct)
        else
            ;
            ; Cannot Open software key, goto ERROR
            ;
            goto fatalregistry
        endif
    else
        ;
        ; upgrade/update hardware component
        ; There is no different between upgrade and update for hardware
        ; component
        ;
        ; 1. Get the Service Name
        ; 2. Change the NetRule section if necessary
        ;
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
              $(MAXIMUM_ALLOWED) NetworkCardKey
        Ifstr(i) $(NetworkCardKey) != $(KeyNull)
            ;
            ; Get Service name
            ;
            GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
            set ServiceName = *($(ServiceNameInfo), 4)

            ;
            ; Change the NetRule if necessary
            ;
            OpenRegKey $(NetworkCardKey) "" "NetRules" +
                $(MAXIMUM_ALLOWED) NetRuleKey
            Ifstr(i) $(NetRuleKey) != $(KeyNull)
                ;
                ; Make the change....
                ;
            else
                ;
                ; Error, cannot open net rules key
                ;
                goto fatalregistry
            endif

            CloseRegKey $(NetRules)
            CloseRegKey $(NetworkCardKey)
        else
            ;
            ; Error, cannot open network card key
            ;
            goto fatalregistry
        endif
        ;
        ; 3. Change the service section of the hardware. i.e.,
        ;    ParameterName change, value change, etc.
        ;
        OpenRegKey $(!REG_H_LOCAL) "" +
              $(!NTN_ServiceBase)"\"$(ServiceName) +
              $(MAXIMUM_ALLOWED) ServiceKey

        Ifstr(i) $(ServiceKey) != $(KeyNull)
            ;
            ; Get the ServiceKey to change the Start value
            ; or Type value. Or open Parameters key to
            ; change the hardware parameters if necessary.
            ;
            CloseRegKey $(ServiceKey)
        else
            ;
            ; Error, cannot open network card key
            ;
            goto fatalregistry
        endif
    endif

    goto end
    ;
    ; End of Upgrade Software
    ;

;
;  Escape hatches
;
successful = +
    goto end

abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo

    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        ; Remove Software Component
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif

    goto end

;
; warning display
;
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
;
; non fatal error display
;
nonfatalinfo = +
    Set Severity = STATUS
    Set CommonStatus = STATUS_USERCANCEL
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif

;
;  Registry is broken
;
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
;
;  Netcard detection failure
;
fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error: cannot get an error string."
        goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
;
; fatal error display
;
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif

    goto setfailed

;
;  Shelling error
;
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed

setfailed = +
    set CommonStatus = STATUS_FAILED
    ;
    ; if OEM_ABANDON_ON == TRUE, then remove the registry entries
    ;
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end

end = +
    goto term

term = +

    Return $(CommonStatus)

[DebugConfiguration]

    Set InfName = "inf"
    Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0)
    Debug-Output $(InfName)" IRQ_Level is "$(!p:IRQValue)
    Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue)
    Debug-Output $(InfName)" MemAddrValue is "$(!p:MemAddrValue)
    Debug-Output $(InfName)" TransceiverValue is "$(!p:TransceiverValue)
    Debug-Output $(InfName)" MemBaseAddrDec is "$(!p:MemBaseAddrDec)
    Debug-Output $(InfName)" MappedValue is "$(!p:MappedValue)

    return

;***************************************************************
;  INSTALL SECTIONS
;***************************************************************
[Install-Option]
    set STF_VITAL = ""

    ifstr(i) $(AddCopy) == "YES"

        ;
        ; Add the files to the copy list
        ;
        ;  BUGBUG: eliminate the "nt2" in the next line when Sunil fixes
        ;      the other INF files
        ;
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers

    endif

    ifstr(i) $(DoCopy) == "YES"

       ;
       ; Copy files in the copy list
       ;
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList

    endif

    Exit

[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   ;set STF_VERSION     = "YES"

   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)

   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList

   exit


[Install-Dll]
   set STF_VITAL        = ""
   AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit


[Source Media Descriptions]
    1  = "Linksys EtherFast 10/100 PC Card (PCMPC100 V3) Driver Disk"  , TAGFILE = landisk

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386


[Files-Inf]
1, oemsetnt.inf,    SIZE=2000,     RENAME=$(!UG_Filename)

[Files-PC100]
1, PC100.SYS , SIZE=88888

;+ For CardBus slot
[Files-PC100A]
1, PC100.SYS , SIZE=88888
;- For CardBus slot

[Files-Dll]
1, PC100.dll,   SIZE=999



[LanguagesSupported]
    ENG


;;+Softex
[OptionsTextENG]
    PC100    = "Linksys EtherFast 10/100 PC Card (PCMPC100 V3)"
;;-Softex

[OptionsTextENGSoftexNT3]
    PC100    = "Linksys EtherFast 10/100 PC Card (PCMPC100 V3) for 16 bit Slot"
    PC100A   = "Linksys EtherFast 10/100 PC Card (PCMPC100 V3) for CardBus Slot"

[OptionsTextENGSoftexNT4]
    PC100    = "Linksys EtherFast 10/100 PC Card (PCMPC100 V3)"


[FileConstantsENGSoftex]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

FunctionTitle   = $(GenericFunctionName)" Setup"

ProductSoftwareDescription = $(GenericDriverName)
ProductHardwareDescription = $(GenericAdapterName)
ProductHardwarePC100Description="Linksys EtherFast 10/100 PC Card (PCMPC100 V3) Adapter"
;+ For CardBus slot
ProductHardwarePC100ADescription="Linksys EtherFast 10/100 PC Card (PCMPC100 V3) Adapter"
;- For CardBus slot

ProductSoftwareTitle =       $(GenericDriverName)
ProductHardwarePC100Title =       $(GenericAdapterName)
;+ For CardBus slot
ProductHardwarePC100ATitle =       $(GenericAdapterName)
;- For CardBus slot

DialogDllName   = "PC100.dll"


IRQList  = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)

IOBaseAddrList = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(IOBaseAddrChoices, 2)

MemAddrList = ^(MemAddrChoices, 1)
MemAddrValues = ^(MemAddrChoices, 2)

ConnectionList  = ^(ConnectionChoices, 1)
ConnectionValues = ^(ConnectionChoices, 2)

;;+Softex

[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

FunctionTitle   = $(GenericFunctionName)" Setup"

ProductSoftwareDescription = $(GenericDriverName)
ProductHardwareDescription = $(GenericAdapterName)
ProductHardwarePC100Description="Linksys EtherFast 10/100 PC Card (PCMPC100 V3) Adapter"
;+ For CardBus slot
ProductHardwarePC100ADescription="Linksys EtherFast 10/100 PC Card (PCMPC100 V3) Adapter"
;- For CardBus slot

ProductSoftwareTitle =       $(GenericDriverName)
ProductHardwarePC100Title =       $(GenericAdapterName)
ProductHardwarePC100ATitle =       $(GenericAdapterName)

DialogDllName   = "PC100.dll"


IRQList  = ^(IRQChoicesSoftex, 1)
IRQValues = ^(IRQChoicesSoftex, 2)

IOBaseAddrList = ^(IOBaseAddrChoicesSoftex, 1)
IOBaseAddrValues = ^(IOBaseAddrChoicesSoftex, 2)

MemAddrList = ^(MemAddrChoicesSoftex, 1)
MemAddrValues = ^(MemAddrChoicesSoftex, 2)

ConnectionList  = ^(ConnectionChoices, 1)
ConnectionValues = ^(ConnectionChoices, 2)
;;-Softex

[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[MemoryMappedChoicesENG]
Map_1 = 1, "ON"
Map_2 = 0, "OFF"

[FileDependentDlgENG]

DlgText = "Please select values for the follwing fields:"

DlgType = "RadioCombination"
DlgTemplate = "Kenny"
Caption = $(FunctionTitle)


CBOptionsGreyed = {}
NotifyFields = {NO, NO}

Combo1Label = "I/O &Base:"
Combo2Label = "&Interrupt:"
Combo3Label = "&Memory:"
Combo4Label = "&Connection Type:"

Combo1List = $(IOBaseAddrList)
Combo1Out  = $(IOBaseAddrValue)

Combo2List = $(IRQList)
Combo2Out  = $(IRQValue)

Combo3List = $(MemAddrList)
Combo3Out  = $(MemAddrValue)

Combo4List = $(ConnectionList)
Combo4Out  = $(ConnectionValue)

ComboListItemsIn  = {Combo1List,Combo2List,Combo3List,Combo4List}
ComboListItemsOut = {Combo1Out,Combo2Out,Combo3Out,Combo4Out}

EditTextIn = ""
EditTextLim = ""


[IRQChoices]
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
IRQ_4 = "9",9
IRQ_5 = "10",10
IRQ_6 = "11",11
IRQ_7 = "12",12
IRQ_8 = "15",15

;;+Softex
[IRQChoicesSoftex]
IRQ_0 = "Auto",0
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
IRQ_4 = "9",9
IRQ_5 = "10",10
IRQ_6 = "11",11
IRQ_7 = "12",12
IRQ_8 = "15",15
;;-Softex

[IOBaseAddrChoices]
IOBase_1 = "0x300",768
IOBase_2 = "0x320",800
IOBase_3 = "0x340",832
IOBase_4 = "0x380",896
IOBase_5 = "0x200",512
IOBase_6 = "0x220",544
IOBase_7 = "0x240",576

;;+Softex
[IOBaseAddrChoicesSoftex]
IOBase_0 = "Auto",0
IOBase_1 = "0x300",768
IOBase_2 = "0x320",800
IOBase_3 = "0x340",832
IOBase_4 = "0x380",896
IOBase_5 = "0x200",512
IOBase_6 = "0x220",544
IOBase_7 = "0x240",576
;;-Softex

[MemAddrChoices]
Memory_1 = "0xC8000",819200            ; 51200
Memory_2 = "0xCC000",835584            ; 52224
Memory_3 = "0xD0000",851968            ; 53248
Memory_4 = "0xD4000",868352            ; 54272
Memory_5 = "0xD8000",884736            ; 55296
Memory_6 = "0xDC000",901120            ; 56320

;;+Softex
[MemAddrChoicesSoftex]
Memory_0 = "Auto",0                    ; 51200
Memory_1 = "0xC8000",819200            ; 51200
Memory_2 = "0xCC000",835584            ; 52224
Memory_3 = "0xD0000",851968            ; 53248
Memory_4 = "0xD4000",868352            ; 54272
Memory_5 = "0xD8000",884736            ; 55296
Memory_6 = "0xDC000",901120            ; 56320
;;-Softex

[ConnectionChoices]
Connect_0 = "AutoSense", 7
Connect_1 = "100Mbps Full Duplex", 6
Connect_2 = "100Mbps Half Duplex", 4
Connect_3 = "10Mbps Full Duplex", 2
Connect_4 = "10Mbps Half Duplex", 0

server: web4, load: 0.77