Bemerkug.txt Driver File Contents (magictwin3047.zip)

Read Me Notes (German)
MagicTwin version 4.3.47.1
Nov,11, 2005





Table of Contents
=================
- How to use this document
- Quick Install Notes
- New features in this release
- Known issues in this release
- Supported NCM2000/XP hardware
- Supported Windows versions
- Adding an NCM2000/XP station printer
- Adding an NCM2000/XP serial device


How to use this document
========================
To view these ReadMe Notes after the NCM2000/XP Setup
program is complete:

1. Press the Start button

2. Select "Programs".

3. Select "NCM2000/XP".

4. Select "ReadMe Notes".

To print these ReadMe Notes after the NCM2000/XP Setup
program is complete, perform steps 1 through 4 above
and click on the "File" menu and select "Print".


Quick Install Notes
===================
This section describes installing NCM2000/XP on
Windows 2000, XP or 2003.

Note: Some NCM2000/XP hardware may include special
install notes. Please read any special notes
included in the NCM2000/XP package.

1. Install Windows from the scratch at the first
   installation.

2. Shut off the machine.

3. Install the NCM2000/XP hardware in the machine.

4. Connect and power on all NCM2000/XP station
   peripherals (monitor, mouse, keyboard, speakers,
   base unit, etc).

5. Restart the machine.

6. On the first boot, Windows may automatically
   detect some new devices and may ask for driver
   files from the NCM2000/XP install disks. With
   some NCM2000/XP hardware, Windows won't detect
   new devices until after the NCM2000/XP software
   is installed.

7. Once any hardware drivers are installed, log in as
   Administrator, run the Control Panel, Add/Remove
   Programs applet, and install the NCM2000/XP
   software from the install disks.

8. Restart the machine. On this boot, the NCM2000/XP
   station monitor should display a blue "NCM2000/XP"
   logo screen followed by a Windows
   login prompt a minute or two after the main
   monitor displays a login prompt.


Warning!

   For SiS 305 PCI/AGP Vga cards, please install NCM2000/XP
   software first. If you do it in different order, the PC 
   can hang at booting (even in Safe Mode).

   Also it is possible, that you could not run more than one 
   add. SIS-PCI-card with modern intel-boards. Please consult
   the technical support of your reseller.


New features in this release
============================
This release includes the following new
product features:

  Support Windows 2000 Service Pack 1
  Support Windows 2000 Service Pack 2
  Support Windows 2000 Service Pack 3
  Support Windows 2000 Service Pack 4
  Support Windows XP Home/Prof original release
  Support Windows XP Home/Prof Service Pack 1 and 2
  Support Windows 2003 w/o Service Pack and SP1


Supported NCM2000/XP hardware
==========================
NCM2000/XP works with the following hydraPAC
hardware:

	Most Dual Headed PCI/AGP video cards (ATI, nVidia, SiS)
	SIS 6326, SIS 315, SIS 305, SIS 630, SIS 650

Supported Windows versions
==========================
NCM2000/XP currently works with these versions
of Windows:

  Windows 2000 Professional
  Windows 2000 Server with Terminal Services
  Windows 2000 Advanced Server with Terminal Services
  Windows XP Home/Proffesional
  Windows 2003 Server Edition


Adding an NCM2000/XP station printer
====================================
Some NCM2000/XP base station hardware include parallel
ports. The parallel ports will appear in the list of
available ports when adding a new printer. Simply
select ports LPT4, LPT5, LPT6, etc when installing
the new printer. If shared, these NCM2000/XP station
printers will also be available across the network.
Note: the parallel port is a "Standard Parallel Port"
(or SPP type) and is not bidirectional.


Adding an NCM2000/XP station serial device
=======================================
Some NCM2000/XP base station hardware include an extra
serial port. Serial port #1 is reserved for the
station mouse. Serial port #2 can be used by another
serial device. The extra serial ports will appear
in the list of available ports when adding a new
serial device. Simply select ports COM5, COM6, COM7,
etc when installing the new device.

Copyright 2005 by Ncomputing Co., Ltd. - Korea

[end]
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.73