NSC DP83815 10/100Mbps MacPhyter3v PCI Adapter Installtion
for NetWare Server 5.0 Driver
Contents
ÍÍÍÍÍÍÍÍ
Introduction
Getting Started
First time installation from the install menu
The other time installation from the install menu
Modifying an existing NetWare 5.0 Server
Getting Started
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
First time installation from the install menu
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Start the NetWare Server.
> CD \NWSERVER
> SERVER
Execute "LOAD NWCONFIG" after booting up. Type:
LOAD NWCONFIG
Select "Driver Options", -> "Configure network drivers", and
-> "Select a driver".
Press <Insert> key to install an unlisted driver.
Please insert driver diskette into floppy disk drive.
Press <F3> to specify a different <PATH>. <PATH> is directory
which includes both C83815.LAN and C83815.LDI
Ex. A:\NETWARE\SERVER\NW50
Select "C83815.LAN ...".
Choose the "Select/Modify driver parameters and protocols"
selection and move the cursor to the C83815_1 parameters window
to change the the slot number.
A slot number must be entered before the installation can proceed.
You can make the slot number 1. Even though the slot number may
not be correct, the C83815.LAN driver automatically find the DP83815
card and load the proper slot number.
You do not have to enter any value for media and line speed or the
Node address. The driver can use the default value for these
Select "Save parameters and load driver" after configuring adapter
setting.
NetWare server will loading/binding driver automatically.
After the driver has been loaded, check whether all the frame types
you want are specified for this driver in AUTOEXEC.NCF.
The other time installation from the install menu
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Start the NetWare Server.
> CD \NWSERVER
> SERVER
Execute "LOAD NWCONFIG" after booting up. Type:
LOAD NWCONFIG
Select "Driver Options", -> "Configure network drivers", and
-> "Select a driver".
Select "C83815.LAN ..." in Select a driver window.
Choose the "Select/Modify driver parameters and protocols"
selection and move the cursor to the C83815_1 parameters window
to change the the slot number.
A slot number must be entered before the installation can proceed.
You can make the slot number 1. Even though the slot number may
not be correct, the C83815.LAN driver automatically find the DP83815
card and load the proper slot number.
You do not have to enter any value for media and line speed or the
Node address. The driver can use the default value for these
Select "Save parameters and load driver" after configuring adapter
setting.
NetWare server will loading/binding driver automatically.
After the driver has been loaded, check whether all the frame types
you want are specified for this driver in AUTOEXEC.NCF.
Modifying an existing NetWare 5.0 Server
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Please insert driver diskette into floppy disk drive.
Copy all provided LAN files into your dos directory
which includes SERVER.EXE.
Ex. >COPY A:\NETWARE\SERVER\NW50\C83815.LAN C:\NWSERVER
>COPY A:\NETWARE\SERVER\NW50\C83815.LDI C:\NWSERVER
Start the NetWare Server.
> CD \NWSERVER
> SERVER
From the Novell Server side, execute "LOAD NWCONFIG". Type:
LOAD NWCONFIG
Select <NCF files Options>
Select <Edit AUTOEXEC.NCF file>
Add the following commands into the server's AUTOEXEC.NCF file.
Search Add C:\NWSERVER
LOAD C83815.LAN FRAME=Ethernet_802.3 NAME=C83815_1_E83
BIND IPX C83815_1_E83 NET=1111
LOAD C83815.LAN FRAME=Ethernet_802.2 NAME=C83815_1_E82
BIND IPX C83815_1_E82 NET=1113
LOAD C83815.LAN FRAME=Ethernet_II NAME=C83815_1_EII
BIND IPX C83815_1_EII NET=1115
LOAD C83815.LAN FRAME=Ethernet_SNAP NAME=C83815_1_ESP
BIND IPX C83815_1_ESP NET=1117
Restart the server again.
Parameters setting for C83815.LAN
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
SLOT 1 - Forces the driver to search for the specified board
LineSpeed - Select connection type of the NSC DP83815 10/100 PCI
adapter card.
= 1 Auto-Negotiation
= 2 Line speed = 10
= 3 Line speed = 100
FDUP - Select the duplex mode of the adapter card.
This parameter works only when LineSpeed is not set
to Auto-Negotiation.
= 1 Full duplex on
= 2 Full duplex off
Ex. LOAD C:\NOVELL\CLIENT32\C83815.LAN FRAME=ETHERNET_802.3 SLOT=1
Note: SLOT must be the correct value as found by the driver.
Ex. LOAD C:\NOVELL\CLIENT32\C83815.LAN LineSpeed=2 FDUP=1
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.