NW312.TXT Driver File Contents (nslan.zip)

           NSC DP83815 10/100Mbps MacPhyter3v PCI Adapter Installtion
                         for NetWare Server 3.12 Driver

 Contents
 ÍÍÍÍÍÍÍÍ
     Introduction
     Getting Started

 Getting Started
 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ

    Modifying an existing NetWare 3.12 Server
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
         Make a sub-directory NLMS.OLD under <SRVPATH> directory which
          include SERVER.EXE.

          Ex. <SRVPATH> = SRV312.
              >MD \SRV312\NLMS.OLD

         Save NBI.NLM, MSM.NLM and ETHERTSM.NLM to NLMS.OLD sub-directory.

         Please insert driver diskette into floppy disk drive.

         Copy all provided NLM and LAN files into your dos directory
          which includes SERVER.EXE, and rename NBI31X.NLM and MSM31X.NLM
          :

          Ex. >COPY A:\NETWARE\SERVER\NW312\NBI31X.NLM C:\SRV312\NBI.NLM
              >COPY A:\NETWARE\SERVER\NW312\MSM31X.NLM C:\SRV312\MSM.NLM
              >COPY A:\NETWARE\SERVER\NW312\ETHERTSM.NLM C:\SRV312
              >COPY A:\NETWARE\SERVER\NW312\C83815.LAN C:\SRV312

         Start the NetWare Server.

          > CD \SRV312
          > SERVER

         From the Novell Server side, execute "LOAD INSTALL". Type:

              LOAD INSTALL

          Select <System Options>
          Select <Edit AUTOEXEC.NCF File>

         Add the following commands into the server's AUTOEXEC.NCF file.

          Search Add C:\SRV312

          LOAD C:\SRV312\NBI.NLM
          LOAD C:\SRV312\MSM.NLM
          LOAD C:\SRV312\ETHERTSM.NLM

          LOAD C83815.LAN FRAME=Ethernet_802.3 NAME=C83815_1_E83
          BIND IPX C83815_1_E83 NET=1111

          LOAD C83815.LAN FRAME=Ethernet_802.2 NAME=C83815_1_E82
          BIND IPX C83815_1_E82 NET=1113

          LOAD C83815.LAN FRAME=Ethernet_II NAME=C83815_1_EII
          BIND IPX C83815_1_EII NET=1115

          LOAD C83815.LAN FRAME=Ethernet_SNAP NAME=C83815_1_ESP
          BIND IPX C83815_1_ESP NET=1117

         Restart the server again.

    Parameters setting for C83815.LAN
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        SLOT      1 - Forces the driver to search for the specified board

        LineSpeed   - Select connection type of the NSC DP83815 10/100 PCI
                      adapter card.
                        = 1     Auto-Negotiation
                        = 2     Line speed = 10
                        = 3     Line speed = 100

        FDUP        - Select the duplex mode of the adapter card.
                      This parameter works only when LineSpeed is not set
                      to Auto-Negotiation.
                        = 1     Full duplex on
                        = 2     Full duplex off

        Ex. LOAD C:\NOVELL\CLIENT32\C83815.LAN FRAME=ETHERNET_802.3 SLOT=1
            Note: SLOT must be the correct value as found by the driver.
        Ex. LOAD C:\NOVELL\CLIENT32\C83815.LAN LineSpeed=2 FDUP=1

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.02